Firmware Version: 2.50.2   

Setup

Etherfast® Cable/DSL Router BEFSR81 V3
 
SetupSecurityApplications
& Gaming		AdministrationStatus    
Basic Setup

 

DDNS

 

MAC Address Clone

 

Advanced Routing

Internet Setup

        
Internet Connection Type    
   IP Address:  . . .  
   Subnet Mask:  . . .  
   Default Gateway:  . . .  
   Static DNS 1:  . . .  
   Static DNS 2:  . . .  
   Static DNS 3:  . . .  
  
  
 
 
Optional Settings
(required by some ISPs)		   Host Name:   
    Domain Name:   
    MTU: Enable Disable   Size:  
   
  
Network Setup      
Router IP   Local IP Address:  . . .   
    Subnet Mask:   
   
  
Network Address
Server Settings (DHCP)		   Local DHCP Server: EnableDisable  
    Start IP Address:    192.168.1.  
    Number  of  Address:   
    DHCP  Address  Range: 192.168.1.100   to   192.168.1.149  
    Client Lease Time:  minutes (0 means one day)  
    WINS:  . . .   
     
 Basic Setup

The Basic Setup screen is where basic configuration is performed. Some ISPs (Internet Service Providers) will require that you enter the DNS information. These settings can be obtained from your ISP. After you have configured these settings, you should set a router password from the Administration->Management screen.

Completing the Internet Setup section is all that is required to set up for your specific ISP. Please look at the table below to configure the Router for your Internet connection.

More...

 
      
    
Save Settings Cancel Changes