Note: After you have made your changes, click Save Settings to apply your changes.

Advanced Routing

NAT

Enabled/Disabled

If this Router shares your Internet connection for your local network, keep the default, Enabled.

Dynamic Routing (RIP)

Enabled/Disabled

When NAT is disabled, this option is available. It allows the Router to automatically exchange routing tables with other router(s).

Static Routing

Route Entries

To set up a static route between the Router and another network, select a number from the drop-down menu. To delete a static route, select its number and click Delete This Entry.

Enter Route Name

Enter a name for the route.

Destination LAN IP

Enter the IP address of the remote network or host to which you want to assign a static route.

Subnet Mask

Enter the subnet mask for the Destination LAN IP address.

Gateway

Enter the IP address of the gateway server that enables communication between the Router and the remote network or host.

Interface

Select the location of the Destination LAN IP address.

Click Show Routing Table to view the static routes you have already set up.

Note: For more information, refer to the online User Guide at www.linksys.com.