|
Security
Settings |
The router
supports four different types of security settings for your network.
Wi-Fi Protected Access (WPA) Pre-Shared key, WPA Remote Access Dial In
User Service (RADIUS), RADIUS, and Wire Equivalence Protection (WEP).
To enable
Security Settings, click the Enable radio button. Then click the
Edit Security Settings button to configure the security settings.
To disable security settings, keep the default setting,
Disable.
WPA Pre-Shared Key: There are two encryption
options for WPA Pre-Shared Key, TKIP and AES. TKIP stands
for Temporal Key Integrity Protocol. TKIP utilizes a stronger encrytption
method and incorporates Message Integrity Code (MIC) to provide protection
against hackers. AES stands for Advanced Encryption System, which utilizes
a symmetric 128-Bit block data encryption.
To use WPA Pre-Shared
Key, enter a password in the WPA Shared Key field between 8 and 63
characters long. You may also enter a Group Key Renewal Interval
time between 0 and 99,999 seconds.
WPA RADIUS: WPA RADIUS
uses an external RADIUS server to perform user authentication. To use WPA
RADIUS, enter the IP address of the RADIUS server, the RADIUS Port
(default is 1812) and the shared secret from the RADIUS server. |