Status

Status

This screen provides the Router's current status in a read-only format.

Host Name	This field shows the Router host name.
Firmware Version	This field shows the version of the firmware installed.
Current Time	This field shows the current time.
Login	This field shows the WAN login status. When you choose PPPoE, RAS PPTP or HBS as the login method, you can click the Connect button to log in. If you click the Disconnect button, the Router will not dial up again until you click the Connect button.
LAN IP Address	This field shows the Router's current IP Address and Subnet Mask, as seen by users on your internal network.
DHCP server	This field shows the status of the Router's DHCP server function as either enabled or disabled.
WAN IP Address	This field shows the Router's IP Address, Network Mask and Default Gateway as seen by external users.
DNS (Domain Name Server) IP Address	This field shows the IP Address of the DNS currently being used.

Login error messages:

PPPoE:

Cannot connect to PPPoE server: No PPPoE response from ISP. Check your WAN line or call your ISP for help.
PPPoE LCP negotiation fail: Can't finish PPP Link Control Protocol (LCP) negotiation.
PPPoE authentication fail: Wrong username or password.
Cannot get an IP address from the PPPoE server: Can't finish PPP Internet Protocol Control Protocol (IPCP) negotiation.

RAS:

Cannot connect to RAS server: No RAS response from ISP. Check your WAN line or call your ISP for help.
RAS negotiation fails: Can't finish RAS control negotiation.
RAS authentication fails: Wrong username or password.
Many sessions active! Try again later: Abnormal disconnection. Wait a moment and dial up again.