Enter New Password

Enter a password for the Router here. Your password must be less than 64 characters long and it cannot contain any spaces.

Re-enter to Confirm

Re-enter the password for confirmation.

SNMP Community

Community is the name used by an SNMP device to control access to MIB variables. This Router provides four community names for users to manage the SNMP access. Users can set the access option of each community name to ''Read-Only'' or ''Read-Write'', and use the correct community name to read or write the MIB variables through some SNMP management tools. The SNMP community must be less than 32 characters long and it cannot contain any spaces.

Restore Factory Defaults

You can restore the Router's factory defaults from this screen. Keep in mind that doing so will erase all of your customized settings. Check the Yes option, then click the Apply button to reset all settings and restore factory defaults.

UPnP Function

Enable or Disable Windows XP UPnP support.

UPnP Control