Firmware Version: 1.0.01
Wireless
Wireless-N Ethernet Bridge with Dual-Band
Setup
Wireless
Administration
Status
Basic Wireless Settings
|
Wireless Network Site Survey
|
WMM
|
Advanced Wireless Settings
Basic Wireless Settings
redirect
Configuration View:
Manual
Wi-Fi Protected Setup
TM
Frequency Band:
5 GHz
2.4 GHz
Both
Network Name (SSID):
Wireless Security
Security Mode:
Disabled
WEP
WPA Personal
WPA2 Personal
Encryption:
104 / 128-bit (26 hex digits)
40 / 64-bit (10 hex digits)
Passphrase:
Key 1:
Key 2:
Key 3:
Key 4:
Tx Key:
Key 1
Authentication:
Open
Shared
Auto
Encryption:
TKIP
AES
TKIP or AES
Passphrase:
Wi-Fi Protected Setup
TM
Use one of the following methods if your router (or access point) supports Wi-Fi Protected Setup:
1. If your router has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right.
OR
2. If your router asks for the client device's PIN number, enter this number
in your router and then click
Link Status:
Disconnected
Network Name (SSID):
Security:
Save Settings
Cancel Changes