Setup – IPv6 Setup
IPv6 is a new IP protocol that uses simplified packet
headers and requires IPSec as a fundamental interoperability
requirement. It also has improved support for mobile IP and computing
devices.
Note: After you have made your changes, click Save Settings to apply your changes.
Internet Setup
Internet Connection Type
IPv6 - Automatic
Select Enabled to automatically use IPv6 for all network addressing.
DUID
This is the IPv6 DUID (DHCP for IPv6 Unique Identifier) value that the router automatically generates.
Network Setup
6rd Tunnel
To use 6rd Tunnel, IPv6 – Automatic must be disabled. A 6rd Tunnel allows your router to send IPv6 IP addresses over IPv4 networks. Select Automatic Configuration for your router to handle these settings (such as prefixes and address masks) automatically. Select Manual Configuration to change these settings manually.
Prefix
Enter the prefix address used for the tunnel provided by your ISP.
Prefix Length
Enter the prefix length used for the tunnel provided by your ISP.
Border Relay
Enter the border relay address used for the tunnel provided by your ISP.
IPv4 Address Mask
Enter the IPv4 address mask length used for the tunnel provided by your ISP.
Note: For more
information, refer to the online User Guide at home.cisco.com.
|