Help

Setup - Basic Setup

Note: After you have made your changes, click Save Settings to apply your changes.

Language Select your language

You can select a different display language for this configuration utility.

Network Setup Device Name

Enter the device name to be used by NetBios.

Friendly Name

Give your device a friendly name. This is how other device in your network will identify it.

Extender IP address

Select the mode of configuration

Automatic Configuration - DHCP

If you can correct using a dynamic IP address or cable modem, keep the default, Automatic Configuration - DHCP.

Static IP

To use a fixed IP address to connect to the internet, select Static IP.

Internet IP Address

Enter the IP address provided by your ISP.

Subnet Mask

Enter the subnet mask.

Default Gateway

Enter the gateway IP address.

DNS 1-3

Enter the DNS server IP address(es) provided by your ISP.

Reboot Reboot

Click this option to restart your Extender. Note: If you have changed any settings on this screen, click Save Settings before you use the Reboot option, otherwise you will lose your new settings.

Note: For more information, refer to the online User Guide at www.linksys.com