|
Extender
MAC address
The
MAC address of the Extender wireless interface as
seen from the upstream AP, is
displayed.
AP MAC address
The
MAC address of the Upstream AP connected is
displayed.
Network
Name (SSID)
The
name of the wireless network, also called the
SSID, is displayed.
Mode
The
wireless mode used by the network is
displayed.
Radio Band
The radio band of your wireless network is displayed.
Channel
Width
The
radio channel width used by Wireless-N devices is
displayed.
Channel
The
Extender’s operating radio channel is
displayed.
Wi-Fi
Protected Setup
The
Extender’s Wi-Fi Protected Setup is
displayed.
Security
The
wireless security method used by the wireless
network is displayed.
Signal
Strength
The Signal Strength
of the Upstream AP connected is displayed.
Signal
Quality
The Signal Quality
of the Upstream AP connected is displayed.
Status
The
status of the Extender wireless interface as seen
from the Upstream AP: Associated, Down,
Association in progress, Not configured, is
displayed.
Uplink
uptime
The
duration that the Extender has been associated
with the AP is displayed in seconds.
Packet
count
The
number of transmitted, received, dropped and in
error packets is displayed.
Sent(TX)
The number of packet
transmitted on the Upstream AP and on the Client sides is displayed.
Dropped
The
number of packet dropped on the Upstream AP and on
the Client sides, is displayed.
Received (RX)
The number of
packet Received on the Upstream AP and on the Client sides is displayed.
Errors
The number of
error packet on the Upstream AP and on the Client sides is displayed
Wireless
Clients Table
The Global MAC and IP Address on the wireless connected clients, is displayed. |