Management
The
Management
screen allows you to change the Router's security settings. It is strongly recommended that you change the factory default password of the Router, which is
admin
. All users who try to access the Router's web-based utility or Setup Wizard will be prompted for the Router's password. cellSpacing=0 cellPadding=0 border=1>
vAlign=top width=115> Router Password vAlign=top width=475> The new Password must not exceed 32 characters in length and must not include any spaces. Enter the new Password a second time to confirm it.
vAlign=top width=115> Remote Management vAlign=top width=475> This feature allows you to manage your Router from a remote location, via the Internet. To disable this feature, keep the default setting,
Disable
. To enable this feature, select
Enable
, and use the specified port (default is
8080
) on your PC to remotely manage the Router. You must also change the Router's default password to one of your own, if you haven already. A unique password will increase security. To remotely manage the Router, enter
http://xxx.xxx.xxx.xxx:8080
(the x's represent the Router's Internet IP address, and 8080 represents the specified port) in your web browser's
Address
field. You will be asked for the Router's password. After successfully entering the password, you will be able to access the Router's web-based utility. Note: If the Remote Management feature is enabled, anyone who knows the Router's Internet IP address and password will be able to alter the Router's settings.
vAlign=top width=115>
UPnP
vAlign=top width=475> Used by certain programs to automatically open ports for communication.
Check all the values and click
Save Settings
to save your settings. Click
Cancel Changes
to cancel your unsaved changes.