Router Status
This screen provides the Router's current status information in a read-only format.
Information
Firmware Version Show the current firmware of the Router. MAC Address Shows the MAC Address of your Internet
interface.
Current
Time
Shows the Current time.
Login Type
This field shows the Internet login status. When you choose PPPoE as the login method, you can click the Connect button to log in. If you click the Disconnect button, the Router will not dial up again until you click the Connect button.
If your connection is DHCP or Static IP, the Status screen will show you theInternet IP Address, Subnet mask, Default Gateway, DNS 1, and DNS 2. For DHCP connection, DHCP Release and DHCP Renew will be available to release and renew an IP address from the Internet connection.
Login error messages:PPPoE:
Cannot Reach PPPoE server No PPPoE response from ISP. Check your Internet line or call your ISP
for help. PPPoE Negotiation Fail Can't finish PPP Link Control Protocol (LCP) negotiation.
Authentication Failed Wrong user name or password. DSL Line is Disconnected Internet connection is not
available.