Management

Management

Local Router Access

Router Password

Enter the password you choose for this Router. This is needed to gain access to the Web-based Utility.

Re-enter to confirm

Enter the password chosen above to confirm that you properly entered the password.

Remote Router Access

Remote Upgrade

This option allows for upgrading the Router's firmware from a remote location.

Remote Administration This option allows you to access the Web-based Utility from a remote location.

Administrator Port

Enter the port number you want to use to access to the Router from a remote location.

To access the router from the remote location

Enter the following in the URL of your web browser:

http:// <internet IP address of the Router>:<Administrator Port>. For example, if your IP address is 1.2.3.4 and you set the administrator port number to be 5204, you would enter the following:

http://1.2.3.4:5204/

UPnP

UPnP

Select Enabled to allow UPnP communication between the Router and the computer that is UPnP compliant. By default, UPnP is Disabled.

Allow users to make Configuration Changes This options allows users to make changes using windows XP utilities. For example, you can make changes that are configurable through Windows XP utility.

Allow users to Disable Internet Access

This option allows users to disable Internet access by disabling network connections in Windows XP.

Backup and Restore

Click the Backup and Restore button to save and reload the configuration of the Router.

Backup

To save the Router's configuration, click the Backup button. On the window that appears, click the Save button. Select the location and filename, then the Save button.

Restore Click the Browse.. button and specify the location and filename of the configuration file previously saved. Click the Open button and the full path will appear in the prompt. Click the Restore button and then click the Close button.

Click Save Settings to save any changes.

Router Password	Enter the password you choose for this Router. This is needed to gain access to the Web-based Utility.
Re-enter to confirm	Enter the password chosen above to confirm that you properly entered the password.

Remote Upgrade	This option allows for upgrading the Router's firmware from a remote location.
Remote Administration	This option allows you to access the Web-based Utility from a remote location.
Administrator Port	Enter the port number you want to use to access to the Router from a remote location.

UPnP	Select Enabled to allow UPnP communication between the Router and the computer that is UPnP compliant. By default, UPnP is Disabled.
Allow users to make Configuration Changes	This options allows users to make changes using windows XP utilities. For example, you can make changes that are configurable through Windows XP utility.
Allow users to Disable Internet Access	This option allows users to disable Internet access by disabling network connections in Windows XP.

Backup	To save the Router's configuration, click the Backup button. On the window that appears, click the Save button. Select the location and filename, then the Save button.
Restore	Click the Browse.. button and specify the location and filename of the configuration file previously saved. Click the Open button and the full path will appear in the prompt. Click the Restore button and then click the Close button.