Firmware Version: 1.02.10   

Setup

   WRT54GX
 
Setup Wireless Security Access Restrictions

Applications
& Gaming
    

Administration    

Status    

Basic Setup

|

DDNS

|

MAC Address Clone | Advanced Routing
Advanced Routing                

NAT Mode

       
 
   
 

Dynamic Routing

    RIP: Enabled   Disabled    
      Receive RIP versions:      
      Transmit RIP versions:      
 
   
 

Static Routing

    Select set number:
    
   
      Enter Route Name:      
      Destination LAN IP:  . . .    
      Subnet Mask:  . . .    
      Default Gateway:  . . .    
      Interface:
   
   
 
   
 
   
     
 
           
     
  NAT Mode: If the router is hosting your Internet connection, select Enable mode. If another router exists on your network, select Disable.

Dynamic Routing: The router supports RIP protocol to enable the device to update routing information automatically.

Destination LAN IP: This is the remote host to which you would like to assign the static route.
Subnet Mask: Determines the host and the network portion.
More...