|
The
Wireless MAC Filters feature allows you to control which wireless-equipped
PCs may or may not communicate with the Router's depending on their MAC
addresses. To disable the Wireless MAC Filters feature, keep the default
setting, Disable. To set up a filter, click Enable, and
follow these instructions:
1.
If you want to
block specific wireless-equipped PCs from communicating with the Router,
then keep the default setting, Prevent PCs listed from accessing the
wireless network. If you want to allow specific wireless-equipped PCs
to communicate with the Router, then click the radio button next to
Permit only PCs listed to access the wireless network.
2.
Click the
Edit MAC Filter List button. Enter the appropriate MAC addresses
into the MAC fields.
Note: For each MAC field, the MAC
address should be entered in this format: xxxxxxxxxxxx (the x's represent
the actual characters of the MAC address).
3.
Click the
Save Settings button to save your changes. Click the Cancel
Changes button to cancel your unsaved changes. Click the Close
button to return to the Advanced Wireless screen without saving
changes. |