Firmware Version: V2.00.16
Wireless
Wireless-N Gigabit Router with Storage Link
WRT350N
Setup
Wireless
Security
Storage
Access
Restrictions
Applications &
Gaming
Administration
Status
Basic Wireless Settings
|
Wireless Security
|
Wireless MAC Filter
|
Advanced Wireless Settings
Advanced Wireless
AP Isolation:
Enabled
Disabled
(Default: Disabled)
This tab
is used to set up the Router’s advanced wireless functions. These settings should only be adjusted by an expert administrator as incorrect settings can reduce wireless performance.
More...
Authentication Type:
Auto
Open System
Shared Key
(Default: Auto)
Basic Rate:
Default
1 ~ 2 Mbps
All
(Default: Default)
Transmission Rate:
Auto
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
(Default: Auto)
N Transmission Rate:
Auto
6.5 Mbps
13 Mbps
19.5 Mbps
26 Mbps
39 Mbps
52 Mbps
58.5 Mbps
65 Mbps
78 Mbps
104 Mbps
117 Mbps
130 Mbps
(Default: Auto)
CTS Protection Mode:
Auto
Disabled
(Default: Disabled)
Beacon Interval:
(Default: 100 Msec, Range: 20 ~ 1000)
DTIM Interval:
(Default: 1, Range: 1 ~ 255)
Fragmentation Threshold:
(Default: 2346, Range: 256 ~ 2346)
RTS Threshold:
(Default: 2346, Range: 256 ~ 2346)