This feature allows you to customize up to ten
different Internet Access Policies for particular PCs, which are
identified by their IP or MAC addresses. For each policy designated PCs,
during the days and time periods specified.
To create or edit a policy, follow these
instructions:
1.
Select the policy number (1-10) in the drop-down
menu.
2.
Enter a name in the Enter Profile Name
field.
3.
Click the Edit List of PCs button.
4.
On the List of PCs screen, specify PCs by IP address or MAC
address. Enter the appropriate IP addresses into the IP fields. If
you have a range of IP addresses to filter, complete the appropriate IP
Range fields. Enter the appropriate MAC addresses into the MAC
fields.
5.
Click the Apply button to save your changes. Click the
Cancel button to cancel your unsaved changes. Click the
Close button to return to the Filters
screen.
6.
If you want to block the listed PCs from Internet access during the
designated days and time, then keep the default setting, Disable
Internet Access for Listed PCs. If you want the listed PCs to be able
to access the Internet during the designated days and time, then click the
radio button next to Enable Internet Access for Listed
PCs.
7.
Set the days when access will be filtered. Select Everyday
or the appropriate days of the week.
8.
Set the time when access will be
filtered. Select 24 Hours, or check the box next to
From and use the drop-down boxes to designate a specific time
period.
9.
Click the Add to
Policy button to save your changes and active it.
10.
To create or edit additional policies, repeat steps 1-9. |