| |
|
Wireless Tab / Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network's radius.
Wireless MAC Filter
| Wireless MAC Filter |
Select Wireless Network (SSID)
Select the wireless network you want to configure, 1. linksys, 2. Guest, 3. linksys-3, or
4. linksys-4.
Enabled/Disabled
To use the wireless MAC filter, select Enabled. Otherwise, keep the default, Disabled.
MAC Address Filter
To allow access by network devices with the MAC addresses on this list, select Filter As White List. To block access by network devices with the MAC addresses on this list, keep the default, Filter As Black List.
MAC 01-20
Enter the MAC addresses of the devices whose wireless access you want to block or allow.
Each MAC address and its respective status is listed.
Wireless Client Table
This table displays associated wireless client's MAC address and state (authentication or not).
|
Click the Save Settings button to apply your changes. or Cancel Changes button to cancel. or Copy button to copy associated wireless client's MAC address (if there is any). |
|