SNMP
This Router supports SNMP. If you have a SNMP
management program, you can use it to manage and monitor this
Router.
SNMP Version
Select the version supported by your SNMP management
program.
If Version 3 is selected, a username and password is required.
Enter the username and password in the fields provided.
Identification
- SysContact - Name of the contact person.
- SysLocation - Location of the contact person.
Management Stations
For each Management Station, the following data is
required.
- IP Address - The IP Address of the system running the SNMP program.
- Community - Enter the Community String value – normally "Public" or
"Private". Leaving this blank will disable management by this station.
- Access - Select the desired option - Read Only, Read/Write, or Not
Accessible.
Trap Receivers
For each Trap Receiving Station, the following data
is required.
- Enable - Use this checkbox to Enable/Disable Trap Receiving by this
station.
- IP Address - The IP Address of the system running the SNMP program.
- Community - Enter the Community String value – normally "Public" or
"Private". Leaving this blank will disable management by this station.
- Severity - Select the reqired option for Trap Severity.