• Unless you have multiple routers installed on your network, you can ignore this feature.
• The static routing function determines the path that data follows over your network before and after it passes through your router. You can use static routing to allow different IP domain users to access the Internet through this device.
• This router is also capable of dynamic routing (see the Dynamic Routing tab). In many cases, it is better to use dynamic routing because the function will allow the router to automatically adjust to physical changes in the network's layout.
• To setup static routing, you need to add routing entries for each LAN segment.
• Also, all other network routers should direct Internet - bound traffic to the Linksys router. Normally, this is done by setting the "default route" entry to the Linksys Router.

This is an advanced feature. Please proceed with caution.

• Select a Static Route Entry from the drop down list. The Router supports up to 20 static route entries.
• The current data for this entry will appear in the fields on screen.
• Enter or change the data for the static route entry, as described in the table below.
• Click "Apply" when finished with this entry.
• Select another entry to create or modify.

Destination LAN IP	Enter the network address of the remote LAN segment. For a standard Class C IP domain, the network address is the first 3 fields of the Destination LAN IP, while the last field should be 0.
Network Mask	Enter the Subnet Mask used on the destination LAN IP domain. For Class C IP domain, the Subnet Mask is 255.255.255.0.
Gateway IP	If the Linksys router is the main IP router to connect your network to the Internet, then your Gateway IP is the same IP Address as the Linksys router. If you have another router handling your network's Internet connection, enter the IP Address of your main Internet router here instead.

1. Select a Static Route Entry from the drop down list.
2. Click the "Delete this Entry" button.
3. Click the "Apply" button.

• Click this button to see the routing table.
• You can see all of the valid route entries in use.