Router
This screen provides the Router's current status information in a read-only format.
Information
|
Firmware Version |
Show the current firmware of the Router. |
|
MAC Address |
Shows the MAC Address of your Internet interface. |
Login Type
This field shows the Internet login status. When you choose PPPoE, RAS, PPTP, or HBS as the login method, you can click the Connect button to log in. If you click the Disconnect button, the Router will not dial up again until you click the Connect button.
If your connection is DHCP or Static IP, the Status screen will show you theInternet IP Address, Subnet mask, Default Gateway, DNS 1, and DNS 2. For DHCP connection, DHCP Release and DHCP Renew will be available to release and renew an IP address from the Internet connection.
Login error messages:PPPoE:
Cannot Connect to PPPoE server No PPPoE response from ISP. Check your Internet line or call your ISP
for help. PPPoE LCP negotiation fail Can't finish PPP Link Control Protocol (LCP) negotiation.
PPPoE authentication fail Wrong user name or password. Cannot get an IP address from the PPPoE server Can't finish PPP Internet Protocol Control Protocol (IPCP)
negotiation. RAS:
Cannot connect to RAS server No RAS response from ISP. Check your WAN line or call your ISP for
help. RAS negotiation fails Can't finish RAS control negotiation. PPPoE authentication fail Wrong user name or password. Many sessions active! Try again later Abnormal disconnection. Wait a moment and dial up
again.