Administration – Management
Note: After you have made your
changes, click Save Settings to apply your
changes.
Management
Router Access
Router Password
To ensure the Router’s
security, this password protects access to the Router’s
browser-based utility. Enter a new password.
Re-enter to confirm
Enter the password again to
confirm.
Local
Management Access
Access via
Select the protocol for local
access.
Access via Wireless
To allow wireless access to the
Router’s browser-based utility, keep the default, Enabled.
Remote
Management Access
Remote Management
To manage the Router over the
Internet, select Enabled.
Access via
Select the protocol for remote
access.
Allowed Remote IP Address
To allow access to the Router
from any external IP address, select Any IP
Address. To specify an external IP address or range of IP
addresses, select and complete the IP address range fields.
Remote Management Port
Enter the port number that will
be open to remote access.
ALG
SIP
The SIP ALG option allows SIP
packets to traverse the NAT firewall. To use the SIP ALG for VoIP
service, select Enabled. If your VoIP
service provider uses other NAT traversal solutions such as STUN,
TURN, or ICE, then keep the default, Disabled.
UPnP
UPnP
UPnP allows the appropriate
operating system to automatically configure the Router for various
applications, such as online gaming and VoIP calls.
Allow Users to Configure
If you want to be able to make
manual changes to the Router while using the UPnP feature, keep the
default, Enabled.
Allow Users to Disable
Internet Access
To prevent local network users
from disabling your Internet connection through the UPnP feature,
keep the default, Disabled.
Back Up and
Restore
Back Up Configuration
To back up the Router’s
configuration settings, click this option and follow the on-screen
instructions.
Restore Configuration
To restore the Router’s
configuration settings, click this option and follow the on-screen
instructions. (You must have previously backed up the Router’s
configuration settings.)
Note: For more information,
refer to the online User Guide at home.cisco.com. |