Setup = new Array(); Setup[0] = "Setup"; Setup[1] = "Inställning"; Wireless = new Array(); Wireless[0] = "Wireless"; Wireless[1] = "Trådlös"; Security = new Array(); Security[0] = "Security"; Security[1] = "Säkerhet"; Access_Restrictions = new Array(); Access_Restrictions[0] = "Access Restrictions"; Access_Restrictions[1] = "Åtkomstbegr."; Applications_Gaming= new Array(); Applications_Gaming[0] = "Applications & Gaming"; Applications_Gaming[1] = "Program & spel"; Administration = new Array(); Administration[0] = "Administration"; Administration[1] = "Administration"; Status = new Array(); Status[0] = "Status"; Status[1] = "Status"; Management = new Array(); Management[0] = "Management"; Management[1] = "Hantering"; Log= new Array(); Log[0] = "Log"; Log[1] = "Logg"; Diagnostics= new Array(); Diagnostics[0] = "Diagnostics"; Diagnostics[1] = "Diagnostik"; Factory_Default = new Array(); Factory_Default[0] = "Factory Default"; Factory_Default[1] = "Fabriksinställning"; Firmware_Upgrade = new Array(); Firmware_Upgrade[0] = "Firmware Upgrade"; Firmware_Upgrade[1] = "Uppgr. inbyggd progr."; Reboot = new Array(); Reboot[0] = "Reboot"; Reboot[1] = "Starta om"; Config_Management = new Array(); Config_Management[0] = "Config Management"; Config_Management[1] = "Konfighantering"; Help_Diag = new Array(); Help_Diag[0] = "

Ping Target IP: Enter the IP Address that you want to ping in the field. <\p>

No. of Pings: Enter the number of times that you want to ping. <\p>

Ping Size: Enter the size of the ICMP Request. <\p>

Ping Interval:Enter the ping interval in Milliseconds. <\p>

Ping Timeout:Enter the time in Milliseconds. <\p>"; Help_Diag[1] = "

IP-adress för pingmål: Ange IP-adressen som du vill pinga i fältet. <\p>

Antal pingningar: Ange antalet gånger du vill pinga. <\p>

Pingstorlek: Ange storleken på ICMP-begäran. <\p>

Pingintervall:Ange pingintervallet i millisekunder. <\p>

Tidsgräns för pingning:Ange tiden i millisekunder. <\p>"; Ping_Test = new Array(); Ping_Test[0] = "Ping Test"; Ping_Test[1] = "Ping-testning"; Ping_Test_Parameters= new Array(); Ping_Test_Parameters[0] = " Ping Test Parameters"; Ping_Test_Parameters[1] = " Parametrar för ping-testning"; Ping_Target_IP= new Array(); Ping_Target_IP[0] = " Ping Target IP"; Ping_Target_IP[1] = " IP-adress för pingmål"; No_of_Pings= new Array(); No_of_Pings[0] = "No.of Pings"; No_of_Pings[1] = "Antal pingningar"; Ping_Size= new Array(); Ping_Size[0] = "Ping Size"; Ping_Size[1] = "Pingstorlek"; Ping_Interval= new Array(); Ping_Interval[0] = "Ping Interval"; Ping_Interval[1] = "Pingintervall"; Ping_Timeout= new Array(); Ping_Timeout[0] = "Ping Timeout"; Ping_Timeout[1] = "Tidsgräns för pingning "; bytes= new Array(); bytes[0] = "bytes"; bytes[1] = "byte"; Milliseconds= new Array(); Milliseconds[0] = "Milliseconds"; Milliseconds[1] = "Millisekunder"; Router_Password= new Array(); Router_Password[0] = "Router Password"; Router_Password[1] = "Lösenord för router"; Local_Router_Access= new Array(); Local_Router_Access[0] = "Local Router Access"; Local_Router_Access[1] = "Lokal åtkomst till router"; Remote_Router_Access= new Array(); Remote_Router_Access[0] = "Remote Router Access"; Remote_Router_Access[1] = "Fjärråtkomst till router"; SNMP= new Array(); SNMP[0] = "SNMP"; SNMP[1] = "SNMP"; Identification= new Array(); Identification[0] = "Identification"; Identification[1] = "Identifiering"; UPNP= new Array(); UPNP[0] = "UPNP"; UPNP[1] = "UPNP"; User_Name= new Array(); User_Name[0] = "User Name"; User_Name[1] = "Användarnamn"; Router_Password= new Array(); Router_Password[0] = "Router Password"; Router_Password[1] = "Lösenord till router"; Re_enter_to_confirm= new Array(); Re_enter_to_confirm[0] = "Re-enter to confirm"; Re_enter_to_confirm[1] = "Skriv in igen för att bekräfta"; Remote_Management= new Array(); Remote_Management[0] = "Remote Management"; Remote_Management[1] = "Fjärrhantering"; Management_Port= new Array(); Management_Port[0] = "Management Port"; Management_Port[1] = "Hanteringsport"; Enabled= new Array(); Enabled[0] = "Enabled"; Enabled[1] = "Aktiverad"; Disabled= new Array(); Disabled[0] = "Disabled"; Disabled[1] = "Inaktiverad"; Contact= new Array(); Contact[0] = "Contact"; Contact[1] = "Kontakt"; Device_Name= new Array(); Device_Name[0] = "Device Name"; Device_Name[1] = "Enhetsnamn"; Location= new Array(); Location[0] = "Location"; Location[1] = "Plats"; Get_Community= new Array(); Get_Community[0] = "Get Community"; Get_Community[1] = "Hämta gruppnamn"; Set_Community= new Array(); Set_Community[0] = "Set Community"; Set_Community[1] = "Ställ in gruppnamn"; SNMP_Trap_Community= new Array(); SNMP_Trap_Community[0] = "SNMP Trap-Community"; SNMP_Trap_Community[1] = "SNMP gruppnamn för felmeddelanden"; SNMP_Trusted_Host= new Array(); SNMP_Trusted_Host[0] = "SNMP Trusted Host"; SNMP_Trusted_Host[1] = "Tillförlitlig värd för SNMP "; SNMP_Trap_Destination= new Array(); SNMP_Trap_Destination[0] = "SNMP Trap-Destination"; SNMP_Trap_Destination[1] = "SNMP destination för felmeddelanden"; Configuration_Changes= new Array(); Configuration_Changes[0] = "Allow User to make
 Configuration Changes"; Configuration_Changes[1] = "Tillåt användare att
 ändra konfigurationen"; Internet_Access= new Array(); Internet_Access[0] = "Allow User to disable
 Internet Access"; Internet_Access[1] = "Tillåt användare att inaktivera
 Internetåtkomst"; Location= new Array(); Location[0] = "Location"; Location[1] = "Plats"; Help_Manage= new Array(); Help_Manage[0] = "Router Password: It is recommended that you change the default password to one of your choice. <\p>

Re-enter to confirm: Re-enter the Router's new Password to confirm it. <\p>

Remote Router Access: This feature allows you to access the Router from a remote location, via the Internet.<\p>

Remote Management:This feature allows you to manage the Router from a remote location,via the Internet. To enable Remote Management, click Enabled.<\p>

Mangagement Port: Select the port number you will use to remotely access the Router from the drop-down menu. <\p>"; Help_Manage[1] = "Lösenord till router: Du rekommenderas att ändra standardlösenordet till ett eget lösenord. <\p>

Skriv in igen för att bekräfta: Skriv in det nya router-lösenordet igen för att bekräfta. <\p>

Fjärråtkomst till router: Med denna funktion kommer du åt routern från en fjärrplats via Internet. <\p>

Fjärrhantering:Med denna funktion hanterar du routern från en fjärrplats via Internet. Om du vill aktivera fjärrhantering klickar du på Aktiverad. <\p>

Hanteringsport: Välj portnumret som ska användas för fjärråtkomst till routern från listmenyn. <\p>

Simple Network Management Protocol (SNMP) är ett populärt protokoll för övervakning och hantering av nätverk. Klicka på Aktiverad för att aktivera SNMP."; More= new Array(); More[0] = "More"; More[1] = "Mera"; Device_Reboot= new Array(); Device_Reboot[0] = "Device Reboot"; Device_Reboot[1] = "Starta om enhet"; Yes= new Array(); Yes[0] = "Yes"; Yes[1] = "Ja"; No= new Array(); No[0] = "No"; No[1] = "Nej"; Help_Reboot= new Array(); Help_Reboot[0] = "If you wish to reboot the Router, click Yes."; Help_Reboot[1] = "Om du vill starta om routern klickar du på Ja."; Log= new Array(); Log[0] = "Log"; Log[1] = "Logg"; Email_Alert= new Array(); Email_Alert[0] = "E-Mail Alert"; Email_Alert[1] = "E-postvarning"; Syslog_Notification= new Array(); Syslog_Notification[0] = "Syslog Notification"; Syslog_Notification[1] = "Syslog-meddelande"; Notification_Queue_Length= new Array(); Notification_Queue_Length[0] = "Notification Queue Length"; Notification_Queue_Length[1] = "Längd på meddelandekö"; Alert_Log= new Array(); Alert_Log[0] = "Alert Log"; Alert_Log[1] = "Varningslogg"; General_Log= new Array(); General_Log[0] = "General Log"; General_Log[1] = "Allmän logg"; Email_General_Logs= new Array(); Email_General_Logs[0] = "E-Mail Address for General Logs"; Email_General_Logs[1] = "E-postadress för allmänna loggar"; Email_Alert_Logs= new Array(); Email_Alert_Logs[0] = " E-Mail Address for Alert Logs"; Email_Alert_Logs[1] = " E-postadress för varningsloggar"; Return_Email= new Array(); Return_Email[0] = " Return E-Mail address"; Return_Email[1] = " Returadress för e-post"; Email_IP= new Array(); Email_IP[0] = "E-Mail Server IP Address"; Email_IP[1] = "IP-adress för e-postserver"; Syslog_IP= new Array(); Syslog_IP[0] = "Syslog Server IP Address"; Syslog_IP[1] = "IP-adress för syslog-server"; Syslog_Priority= new Array(); Syslog_Priority[0] = "Syslog Priority"; Syslog_Priority[1] = "Syslog-prioritet"; Log_Queue_Length= new Array(); Log_Queue_Length[0] = "Log Queue Length"; Log_Queue_Length[1] = "Längd på loggkö"; Log_Time_Threshold= new Array(); Log_Time_Threshold[0] = "Log Time Threshold"; Log_Time_Threshold[1] = "Tröskelvärde för loggtid"; entries= new Array(); entries[0] = "entries"; entries[1] = "poster"; seconds= new Array(); seconds[0] = "seconds"; seconds[1] = "sekunder"; Syn_Flooding= new Array(); Syn_Flooding[0] = "Syn Flooding"; Syn_Flooding[1] = "Syn Flooding"; Ping_Of_Death= new Array(); Ping_Of_Death[0] = "Ping Of Death"; Ping_Of_Death[1] = "Ping Of Death"; IP_Spoofing= new Array(); IP_Spoofing[0] = "IP Spoofing"; IP_Spoofing[1] = "IP Spoofing"; Unauthorized_Login_Attempt= new Array(); Unauthorized_Login_Attempt[0] = "Unauthorized Login Attempt"; Unauthorized_Login_Attempt[1] = "Obehörigt inloggningsförsök"; Win_Nuke= new Array(); Win_Nuke[0] = "Win Nuke"; Win_Nuke[1] = "Win Nuke"; System_Error_Messages= new Array(); System_Error_Messages[0] = "System Error Messages"; System_Error_Messages[1] = "Systemfelmeddelanden"; Authorized_Login= new Array(); Authorized_Login[0] = "Authorized Login"; Authorized_Login[1] = "Behörig inloggning"; Deny_Policies= new Array(); Deny_Policies[0] = "Deny Policies"; Deny_Policies[1] = "Neka policy"; Configuration_Changes_1= new Array(); Configuration_Changes_1[0] = "Configuration Changes"; Configuration_Changes_1[1] = "Konfigurationsändringar"; Allow_Policies= new Array(); Allow_Policies[0] = "Allow Policies"; Allow_Policies[1] = "Tillåt policy"; Content_Filtering= new Array(); Content_Filtering[0] = "Content Filtering"; Content_Filtering[1] = "Innehållsfiltrering"; Help_Report= new Array(); Help_Report[0] = "

Router Password: It is recommended that you change the default password to one of your choice.<\font><\p>

Re-enter to confirm: Re-enter the Router's new Password to confirm it.<\font><\p>

Remote Router Access: This feature allows you to access the Router from a remote location, via the Internet.<\font>

Remote Management:This feature allows you to manage the Router from a remote location,via the Internet. To enable Remote Management, click Enabled.<\font><\p>

Mangagement Port: Select the port number you will use to remotely access the Router from the drop-down menu.<\font>

Simple Network Management Protocol (SNMP) is a popular network monitoring and management protocol. To enable SNMP, click Enabled.<\font><\p>"; Help_Report[1] = "

Lösenord till router: Du rekommenderas att ändra standardlösenordet till ett eget lösenord.<\font><\p>

Skriv in igen för att bekräfta: Skriv in det nya router-lösenordet igen för att bekräfta.<\font><\p>

Fjärråtkomst till router: Med denna funktion kommer du åt routern från en fjärrplats via Internet.<\font>

Fjärrhantering:Med denna funktion hanterar du routern från en fjärrplats via Internet. Om du vill aktivera fjärrhantering klickar du på Aktiverad.<\font><\p>

Hanteringsport: Välj portnumret som ska användas för fjärråtkomst till routern från listmenyn.<\font>

Simple Network Management Protocol (SNMP) är ett populärt protokoll för övervakning och hantering av nätverk. Klicka på Aktiverad för att aktivera SNMP."; Restore_Factory_Defaults= new Array(); Restore_Factory_Defaults[0] = "Restore Factory Defaults "; Restore_Factory_Defaults[1] = "Återställ fabriksinställningarna "; Help_Restore= new Array(); Help_Restore[0] = "

If you have exhausted all other options and wish to restore the Router to its factory default settings and lose all your settings, click Yes.

"; Help_Restore[1] = "

Om du har provat alla andra alternativ och vill återställa routern till fabriksinställningarna och förlora alla dina inställningar klickar du på Ja.

"; Download_Router_Config= new Array(); Download_Router_Config[0] = "Download Router Config"; Download_Router_Config[1] = "Hämta router-konfig"; Upload_Router_Config= new Array(); Upload_Router_Config[0] = "Upload Router Config"; Upload_Router_Config[1] = "Skicka router-konfig"; Help_Config= new Array(); Help_Config[0] = "

To save the Router's system configuration:

Click the Download Router Configuration File button, and follow the instructions shown.

To load the Router's system configuration:

Click the Browse button to find the configuration file that you want to load to the router.

After the configuration file is selected, click the Load button to start the process.

"; Help_Config[1] = "

Så här sparar du systemkonfigurationen för routern:

Klicka på knappen Hämta router-konfigurationsfil och följ instruktionerna som visas.

Så här läser du in systemkonfigurationen för routern:

Klicka på knappen Browse för att leta upp den konfigurationsfil som du vill läsa in i routern.

När du har valt konfigurationsfil klickar du på knappen Läs in för att påbörja processen.

"; Upgrade_Warning= new Array(); Upgrade_Warning[0] = "

Warning: Upgrading firmware may take a few minutes. Please don't turn off or reset router.

"; Upgrade_Warning[1] = "

Varning! Uppgraderingen av den inbyggda programvaran kan ta några minuter. Se till att inte stänga av eller återställa routern.

"; Help_Upgrade= new Array(); Help_Upgrade[0] = "

To upgrade the Router's firmware:

Click the Browse button to find the firmware upgrade file that you downloaded from the Linksys website and then extracted.

Double-click the firmware file you downloaded and extracted. Click the Upgrade button, and follow the instructions there.

"; Help_Upgrade[1] = "

Så här uppgraderar du den inbyggda programvaran i routern:

Klicka på knappen Browse för att leta upp filen för uppgradering av den inbyggda programvaran som du hämtade på Linksys-webbplatsen och därefter packade upp.

Dubbelklicka på filen för den inbyggda programvaran som du hämtade och packade upp. Klicka på knappen Uppgradera och följ instruktionerna där.

"; Wireless= new Array(); Wireless[0] = "Wireless"; Wireless[1] = "Trådlös"; Basic_Wireless_Settings= new Array(); Basic_Wireless_Settings[0] = "Basic Wireless Settings"; Basic_Wireless_Settings[1] = "Grundläggande trådlösa inställningar"; Wireless_Security= new Array(); Wireless_Security[0] = "Wireless Security"; Wireless_Security[1] = "Trådlös säkerhet"; Wireless_Network_Access= new Array(); Wireless_Network_Access[0] = "Wireless MAC Filter"; Wireless_Network_Access[1] = "Trådlös nätverksåtkomst"; Advanced_Wireless_Settings= new Array(); Advanced_Wireless_Settings[0] = "Advanced Wireless Settings"; Advanced_Wireless_Settings[1] = "Avancerade trådlösa inställningar"; Wireless_Network= new Array(); Wireless_Network[0] = "Wireless Network"; Wireless_Network[1] = "Trådlöst nätverk"; Wireless_Network_Mode= new Array(); Wireless_Network_Mode[0] = "Wireless Network Mode"; Wireless_Network_Mode[1] = "Trådlöst nätverksläge"; Wireless_Network_Name= new Array(); Wireless_Network_Name[0] = "Wireless Network Name(SSID)"; Wireless_Network_Name[1] = "Trådlöst nätverksnamn(SSID)"; Multiple_SSID= new Array(); Multiple_SSID[0] = "Multiple SSID"; Multiple_SSID[1] = "Flera SSID"; Wireless_Channel= new Array(); Wireless_Channel[0] = "Wireless Channel"; Wireless_Channel[1] = "Trådlös kanal"; Wireless_SSID_Broadcast= new Array(); Wireless_SSID_Broadcast[0] = "Wireless SSID Broadcast"; Wireless_SSID_Broadcast[1] = "Trådlös gruppsändning av SSID"; Help_Basic_Wireless= new Array(); Help_Basic_Wireless[0] = "

Wireless Network Mode: You may choose Mixed Mode if you have both 802.11b and 802.11g on your network. If you would like to restrict your network to only 802.11b or 802.11g clients, then choose B-Only or G-Only mode.

Wireless SSID: The SSID is the unique name shared among all PCs in your network.The SSID must be the same for all the PCs on the network in order for them to communicate with each other.

"; Help_Basic_Wireless[1] = "

Trådlöst nätverksläge: Du kan välja blandat läge om du har både 802.11b och 802.11g på ditt nätverk. Om du vill begränsa ditt nätverk till enbart 802.11b- eller 802.11g-klienter så väljer du läget B-enbart eller G-enbart.

Trådlöst SSID: SSID är det unika namn som delas bland alla persondatorer i ditt nätverk. SSID måste vara samma för alla persondatorer i nätverket för att de ska kunna kommunicera med varandra.

"; Select_SSID= new Array(); Select_SSID[0] = "Select SSID"; Select_SSID[1] = "Välj SSID"; Help_WirelessSecurity= new Array(); Help_WirelessSecurity[0] = "The router supports four different types of security settings for your network.Wi-Fi Protected Access (WPA) Pre-Shared key, WPA Remote Access Dial In User Service (RADIUS), RADIUS, and Wire Equivalence Protection (WEP). "; Help_WirelessSecurity[1] = "Router:n stödjer fyra olika typer av säkerhetsinställningar för nätverket.Wi-Fi Protected Access (WPA) i förväg utdelad nyckel, WPA Remote Access Dial In User Service (RADIUS), RADIUS och Wire Equivalence Protection (WEP)."; Advanced_Wireless= new Array(); Advanced_Wireless[0] = "Advanced Wireless"; Advanced_Wireless[1] = "Avancerad trådlös"; Authentication_Type= new Array(); Authentication_Type[0] = "Authentication Type"; Authentication_Type[1] = "Verifieringstyp"; CTS_Protection_Mode= new Array(); CTS_Protection_Mode[0] = "CTS Protection Mode"; CTS_Protection_Mode[1] = "CTS-skyddsläge"; Wireless_Isolation= new Array(); Wireless_Isolation[0] = "Wireless Isolation"; Wireless_Isolation[1] = "Trådlös isolering"; Basic_Data_Rates= new Array(); Basic_Data_Rates[0] = "Basic Data Rates"; Basic_Data_Rates[1] = "Grundläggande datahastigheter"; Control_Tx_Rates= new Array(); Control_Tx_Rates[0] = "Control Tx Rates"; Control_Tx_Rates[1] = "Kontrollhastigheter för Tx"; Beacon_Interval= new Array(); Beacon_Interval[0] = "Beacon Interval"; Beacon_Interval[1] = "Beacon-intervall"; DTIM_Interval= new Array(); DTIM_Interval[0] = "DTIM Interval"; DTIM_Interval[1] = "DTIM-intervall"; RTS_Threshold= new Array(); RTS_Threshold[0] = "RTS Threshold"; RTS_Threshold[1] = "Tröskelvärde för RTS"; Fragmentation_Threshold= new Array(); Fragmentation_Threshold[0] = "Fragmentation
 Threshold"; Fragmentation_Threshold[1] = "Tröskelvärde för
 fragmentering"; ms = new Array(); ms[0] = "ms"; ms[1] = "ms"; range= new Array(); range[0] = "range"; range[1] = "intervall"; default_1= new Array(); default_1[0] = "default"; default_1[1] = "standard"; Help_AdvancedWirelessSettings= new Array(); Help_AdvancedWirelessSettings[0] = "Authentication Type: You may choose between Open and Shared. Please note that all computers on your network must have the same configuration in order to communicate.

Basic Data Rate: This defines the basic data rates your router will advertise.

Control Tx Rates: This determines the speed with which your router will communicate with wireless clients. Unless your are experiencing difficulties communicating with wireless clients, it is best to leave this setting at Auto.

"; Help_AdvancedWirelessSettings[1] = "Verifieringstyp: Du kan välja mellan Öppen och Delad. Notera att alla datorer på nätverket måste ha samma konfiguration för att kunna kommunicera.

Grundläggande datahastigheter: Detta definierar den grundläggande datahastigheten som din router visar.

Kontrollhastigheter för Tx: Detta fastställer med vilken hastighet som din router kommer att kommunicera med trådlösa klienter. Om du inte har några problemen med att kommunicera med trådlösa klienter är det bäst att lämna denna inställning på Auto.

"; Access_List= new Array(); Access_List[0] = "Access List"; Access_List[1] = "Behörighetslista"; Prevent_from_accessing= new Array(); Prevent_from_accessing[0] = "Prevent from accessing"; Prevent_from_accessing[1] = "Förhindra åtkomst"; Permit_to_access= new Array(); Permit_to_access[0] = "Permit to access"; Permit_to_access[1] = "Tillåt åtkomst"; MAC= new Array(); MAC[0] = "MAC"; MAC[1] = "MAC"; Help_WirelessNetowrkAccess= new Array(); Help_WirelessNetowrkAccess[0] = "You may choose to allow or prevent certain computers from accessing your network. Enter the MAC address of the computers that you would like to have controlled access. You may also select a MAC address from currently networked computer by clicking the Select MAC Address from Networked Computers button."; Help_WirelessNetowrkAccess[1] = "Du kan välja att tillåta eller förhindra att vissa datorer har åtkomst till ditt nätverk. Ange MAC-adressen för de datorer där du vill styra åtkomsten. Du kan även välja en MAC-adress från befintliga nätverksdatorer genom att klicka på knappen Välj MAC-adress från nätverksdatorer."; Basic_Setup= new Array(); Basic_Setup[0] = "Basic Setup"; Basic_Setup[1] = "Grundinställning"; DDNS= new Array(); DDNS[0] = "DDNS"; DDNS[1] = "DDNS"; MAC_Address_Clone= new Array(); MAC_Address_Clone[0] = "MAC Address Clone"; MAC_Address_Clone[1] = "Klona MAC-adress"; Advanced_Routing= new Array(); Advanced_Routing[0] = "Advanced Routing"; Advanced_Routing[1] = "Avancerad routing"; VLAN= new Array(); VLAN[0] = "VLAN"; VLAN[1] = "VLAN"; Help_DDNS= new Array(); Help_DDNS[0] = "You may choose to utilize DDNS function with the router. You must have an account with DynDNS.org or TZO.com in order to utilize this function."; Help_DDNS[1] = "Du kan välja att använda DDNS-funktionen med routern. Du måste ha ett konto med DynDNS.org eller TZO.com för att använda denna funktion."; Dynamic_Routing= new Array(); Dynamic_Routing[0] = "Dynamic Routing"; Dynamic_Routing[1] = "Dynamisk routing"; Static_Routing= new Array(); Static_Routing[0] = "Static Routing"; Static_Routing[1] = "Statisk routing"; Operating_Mode= new Array(); Operating_Mode[0] = "Operating Mode"; Operating_Mode[1] = "Driftsläge"; RIP= new Array(); RIP[0] = "RIP"; RIP[1] = "RIP"; Receive_RIP_versions= new Array(); Receive_RIP_versions[0] = "Receive RIP versions"; Receive_RIP_versions[1] = "Ta emot RIP-versioner "; Transmit_RIP_versions= new Array(); Transmit_RIP_versions[0] = "Transmit RIP versions"; Transmit_RIP_versions[1] = "Överför RIP-versioner"; Select_Number= new Array(); Select_Number[0] = "Select Number"; Select_Number[1] = "Välj nummer"; LAN_IP_Address= new Array(); LAN_IP_Address[0] = "LAN IP Address"; LAN_IP_Address[1] = "IP-adress för LAN"; Subnet_Mask= new Array(); Subnet_Mask[0] = "Subnet Mask"; Subnet_Mask[1] = "Nätmask"; Default_Gateway= new Array(); Default_Gateway[0] = "Default Gateway"; Default_Gateway[1] = "Standard-gateway"; Interface= new Array(); Interface[0] = "Interface"; Interface[1] = "Gränssnitt"; metric= new Array(); metric[0] = "metric"; metric[1] = "metrisk"; Help_adminRouting= new Array(); Help_adminRouting[0] = "The router can be setup to route between two different networks. Select the appropriate routing mode for your network and enter the required settings. If you are unsure of these settings, contact your network administrator."; Help_adminRouting[1] = "Routern kan ställas in att dirigera trafik mellan två olika nätverk. Välj lämpligt routingläge för nätverket och ange önskade inställningar. Om du känner dig osäker om dessa inställningar kontaktar du nätverksadministratören."; Email= new Array(); Email[0] = "Email"; Email[1] = "E-post"; TZO_Password_Key= new Array(); TZO_Password_Key[0] = "TZO Password Key"; TZO_Password_Key[1] = "Lösenordsnyckel för TZO"; Domain_Name= new Array(); Domain_Name[0] = "Domain Name"; Domain_Name[1] = "Domännamn"; Internet_IP_Address= new Array(); Internet_IP_Address[0] = "Internet IP Address"; Internet_IP_Address[1] = "IP-adress för Internet"; Help_TZO= new Array(); Help_TZO[0] = "You may choose to utilize DDNS function with the router. You must have an account with DynDNS.org or TZO.com in order to utilize this function."; Help_TZO[1] = "Du kan välja att använda DDNS-funktionen med routern. Du måste ha ett konto med DynDNS.org eller TZO.com för att använda denna funktion."; MAC_Clone_Address= new Array(); MAC_Clone_Address[0] = "MAC Clone Address"; MAC_Clone_Address[1] = "Klonadress för MAC"; Help_MACClone= new Array(); Help_MACClone[0] = "Some ISP may require you to register your computer's MAC address. If you do not wish to re-register your router with your ISP, you may clone the MAC address that you originally registered with your ISP. "; Help_MACClone[1] = "Vissa Internetleverantörer kräver att du registrerar datorns MAC-adress. Om du inte vill registrera om routern med Internetleverantören kan du klona MAC-adressen som du ursprungligen registrerade med Internetleverantören. "; Password= new Array(); Password[0] = "Password"; Password[1] = "Lösenord"; Host_Name= new Array(); Host_Name[0] = "Host Name"; Host_Name[1] = "Värdnamn"; Help_DYNDDNS= new Array(); Help_DYNDDNS[0] = "You may choose to utilize DDNS function with the router. You must have an account with DynDNS.org or TZO.com in order to utilize this function."; Help_DYNDDNS[1] = "Du kan välja att använda DDNS-funktionen med routern. Du måste ha ett konto med DynDNS.org eller TZO.com för att använda denna funktion."; Internet_Setup= new Array(); Internet_Setup[0] = "Internet Setup"; Internet_Setup[1] = "Internetinställning"; Internet_Connection_Type= new Array(); Internet_Connection_Type[0] = "Internet Connection Type"; Internet_Connection_Type[1] = "Anslutningstyp för Internet"; Optional_Settings= new Array(); Optional_Settings[0] = "Optional Settings"; Optional_Settings[1] = "Tillvalsinställningar"; required_ISP= new Array(); required_ISP[0] = "(required by some ISPs)"; required_ISP[1] = "(krävs av vissa Internetleverantörer)"; Network_Setup= new Array(); Network_Setup[0] = "Network Setup"; Network_Setup[1] = "Nätverksinställningar"; Gateway_IP= new Array(); Gateway_IP[0] = "Gateway IP"; Gateway_IP[1] = "Gateway-IP"; Network_Address= new Array(); Network_Address[0] = "Network Address"; Network_Address[1] = "Nätverksadress"; Server_Settings= new Array(); Server_Settings[0] = "Server Settings(DHCP)"; Server_Settings[1] = "Serverinställningar(DHCP)"; Time_Setting= new Array(); Time_Setting[0] = "Time Setting"; Time_Setting[1] = "Tidinställning"; IP_Address= new Array(); IP_Address[0] = "IP Address"; IP_Address[1] = "IP-adress"; MTU= new Array(); MTU[0] = "MTU"; MTU[1] = "MTU"; MTU_Size= new Array(); MTU_Size[0] = "MTU Size"; MTU_Size[1] = "MTU-storlek"; Manual= new Array(); Manual[0] = "Manual"; Manual[1] = "Manuell"; Auto= new Array(); Auto[0] = "Auto"; Auto[1] = "Auto"; Local_IP_Address= new Array(); Local_IP_Address[0] = "Local IP Address"; Local_IP_Address[1] = "Lokal IP-adress"; Local_DHCP_Server= new Array(); Local_DHCP_Server[0] = "Local DHCP Server"; Local_DHCP_Server[1] = "Lokal DHCP-server"; Manually= new Array(); Manually[0] = "Manually"; Manually[1] = "Manuellt"; Date= new Array(); Date[0] = "Date"; Date[1] = "Datum"; Time= new Array(); Time[0] = "Time"; Time[1] = "Tid"; Automatically= new Array(); Automatically[0] = "Automatically"; Automatically[1] = "Automatiskt"; Time_Zone= new Array(); Time_Zone[0] = "Time Zone"; Time_Zone[1] = "Tidszon"; Auto_Daylight_Saving= new Array(); Auto_Daylight_Saving[0] = "Auto Daylight Saving"; Auto_Daylight_Saving[1] = "Automatisk sommartid"; Help_DHCP1= new Array(); Help_DHCP1[0] = "Internet Connection Type: You may choose from Automatic Configuration - DHCP,static IP, PPPoE or PPTP. Please check with your Internet Service Provider to verify which type of connection you will need to use."; Help_DHCP1[1] = "Anslutningstyp för Internet: Du kan välja från automatisk konfiguration - DHCP, statisk IP, PPPoE eller PPTP. Kontrollera med din Internetleverantör vilken typ av anslutning du måste använda."; Help_DHCP2= new Array(); Help_DHCP2[0] = "

Gateway IP: The router is identified on the network by this address. Use the default value if you are unsure of what this setting should be.

Network Address Server Setting: The router is capable of assigning IP addresses to the computers on the network. If you do not have another DHCP server on the network, leave this setting enabled. You may specify the starting IP address, the number of addresses to assign, and the lease time for each address.

Time Setting:You router can automatically synchronize its internal clock with a Time server. Select your appropriate time zone for the router to be synchronized. You many also set the time manually.

"; Help_DHCP2[1] = "

Gateway-IP: Routern identifieras på nätverket av denna adress. Använd det grundinställda värdet om du är osäker på vad denna inställning ska vara.

Serverinställning för nätverksadress: Routern kan tilldela IP-adresser till datorer på nätverket. Om du inte har en annan DHCP-server på nätverket lämnar du denna inställning aktiverad. Du kan ange IP-adressen för start, antalet adresser som ska tilldelas samt lånetiden för varje adress.

Tidsinställning:Routern kan automatiskt synkronisera sin interna klocka med en tidsserver. Välj lämplig tidszon där routern ska synkroniseras. Du kan även ange tiden manuellt."; IPSec= new Array(); IPSec[0] = "IPSec"; IPSec[1] = "IPSec"; Pre_shared_Key= new Array(); Pre_shared_Key[0] = "Pre-shared Key"; Pre_shared_Key[1] = "I förväg utdelad nyckel"; Max_Idle= new Array(); Max_Idle[0] = "Max Idle Time"; Max_Idle[1] = "Anslut på begäran: Max väntetid"; Min= new Array(); Min[0] = "Min."; Min[1] = "min."; Redial_Period= new Array(); Redial_Period[0] = "Keep Alive : Redial Period "; Redial_Period[1] = "Behåll aktiv: Återuppringningsperiod "; Sec= new Array(); Sec[0] = " Sec."; Sec[1] = " Sek."; Primary_DNS= new Array(); Primary_DNS[0] = "Primary DNS"; Primary_DNS[1] = "Primär DNS"; Secondary_DNS = new Array(); Secondary_DNS [0] = "Secondary DNS "; Secondary_DNS [1] = "Sekundär DNS "; Help_Static= new Array(); Help_Static[0] = "

Gateway IP: The router is identified on the network by this address. Use the default value if you are unsure of what this setting should be.

Network Address Server Setting: The router is capable of assigning IP addresses to the computers on the network. If you do not have another DHCP server on the network, leave this setting enabled. You may specify the starting IP address, the number of addresses to assign, and the lease time for each address.

Time Setting: You router can automatically synchronize its internal clock with a time server. Select your appropriate time zone for the router to be synchronized. You many also set the time manually.

"; Help_Static[1] = "

Gateway-IP: Routern identifieras på nätverket av denna adress. Använd det grundinställda värdet om du är osäker på vad denna inställning ska vara.

Serverinställning för nätverksadress: Routern kan tilldela IP-adresser till datorer på nätverket. Om du inte har en annan DHCP-server på nätverket lämnar du denna inställning aktiverad. Du kan ange IP-adressen för start, antalet adresser som ska tilldelas samt lånetiden för varje adress.

Tidsinställning: Routern kan automatiskt synkronisera sin interna klocka med en tidsserver. Välj lämplig tidszon där routern ska synkroniseras. Du kan även ange tiden manuellt.

"; VPN_Client_Access= new Array(); VPN_Client_Access[0] = "VPN Client Access"; VPN_Client_Access[1] = "Åtkomst för VPN-klient"; Internet_Access= new Array(); Internet_Access[0] = "Internet Access"; Internet_Access[1] = "Internetåtkomst"; VPN_Client_Status= new Array(); VPN_Client_Status[0] = "VPN Client Status"; VPN_Client_Status[1] = "Status för VPN-klient"; VPN_Client_List_Table= new Array(); VPN_Client_List_Table[0] = "VPN Client List Table"; VPN_Client_List_Table[1] = "Listtabell för VPN-klient"; Allow_change_password= new Array(); Allow_change_password[0] = "Allow user to change password"; Allow_change_password[1] = "Tillåt användaren att ändra lösenord"; Help_VPNClientAccess= new Array(); Help_VPNClientAccess[0] = "

You can allow remote users to easily establish a VPN connection to your router using the Linksys VPN Client utility to access resources on your local network.

User Name:Enter the user name. User name can be any keyboard characters.

Password: Enter the password you would like to assign to this user.

Confirm Password:Retype the password to ensure it has been entered correctly.

"; Help_VPNClientAccess[1] = "

Du kan tillåta fjärranvändare att enkelt upprätta en VPN-anslutning till din router med hjälp av Linksys verktyg för VPN-klient för åtkomst till resurser på ditt lokala nätverk.

Användarnamn:Skriv in användarnamn. Användarnamnet kan bestå av vilka tangentbordstecken som helst.

Lösenord: Skriv in det lösenord som du vill tilldela till denna användare.

Bekräfta lösenord:Skriv in lösenordet igen för att säkerställa att det har skrivits in på rätt sätt.

"; Blocked_Services= new Array(); Blocked_Services[0] = "Blocked Services"; Blocked_Services[1] = "Blockerade tjänster"; Block_URL= new Array(); Block_URL[0] = "Website Blocking
by URL Address"; Block_URL[1] = "Blockering av webbplats
med URL-adress"; Block_Keyword= new Array(); Block_Keyword[0] = "Website Blocking
by Keyword"; Block_Keyword[1] = "Blockering av webbplats
med nyckelord"; Internet_Access_Policy= new Array(); Internet_Access_Policy[0] = "Internet Access Policy"; Internet_Access_Policy[1] = "Policy för Internetåtkomst"; Enter_Policy_Name= new Array(); Enter_Policy_Name[0] = "Enter Policy Name"; Enter_Policy_Name[1] = "Skriv in namn på policy"; Policy_Type= new Array(); Policy_Type[0] = "Policy Type"; Policy_Type[1] = "Typ av policy"; PCs= new Array(); PCs[0] = "PCs"; PCs[1] = "Persondatorer"; Days= new Array(); Days[0] = "Days"; Days[1] = "Dagar"; Everyday= new Array(); Everyday[0] = "Everyday"; Everyday[1] = "Alla dagar"; Sun= new Array(); Sun[0] = "Sun"; Sun[1] = "Sön"; Mon= new Array(); Mon[0] = "Mon"; Mon[1] = "Mån"; Tue= new Array(); Tue[0] = "Tue"; Tue[1] = "Tis"; Wed= new Array(); Wed[0] = "Wed"; Wed[1] = "Ons"; Thu= new Array(); Thu[0] = "Thu"; Thu[1] = "Tor"; Fri= new Array(); Fri[0] = "Fri"; Fri[1] = "Fre"; Sat= new Array(); Sat[0] = "Sat"; Sat[1] = "Lör"; Hours= new Array(); Hours[0] = "Hours"; Hours[1] = "Timmar"; From= new Array(); From[0] = "From"; From[1] = "Från"; To= new Array(); To[0] = "To"; To[1] = "Till"; Help_Filters= new Array(); Help_Filters[0] = "Internet Access Policy: Multiple Filters can be saved as Internet Access Policies.When you wish to edit one, select the number of the Policy from the drop-down menu. The tab will change to reflect the settings of this Policy. If you wish to delete this Policy, click the Delete button.To see a summary of all Policies, click the Summary button.

Internet Access can also be filtered by URL Address, the address entered to access Internet sites, by entering the address in one of the Website Blocking by URL Address fields. If you do not know the URL Address, filtering can be done by Keyword by entering a keyword in one of the Website Blocking by Keyword fields

"; Help_Filters[1] = "Policy för Internetåtkomst: Flera filter kan sparas som policy för Internetåtkomst. När du vill redigera en av dem väljer du numret på policyn från den nedrullningsbara menyn. Fliken ändras och visar inställningarna för denna policy. Om du vill ta bort denna policy klickar du på knappen Ta bort. Om du vill se en sammanfattning av alla policy klickar du på knappen Sammanfattning.

Internetåtkomsten kan även filtreras med URL-adressen (den adress som skrivs in för åtkomst till Internetsidor) genom att skriva in adressen i ett av fälten Blockering av webbplats med URL-adress. Om du inte känner till URL-adressen kan filtrering ske med nyckelord genom att nyckelordet skrivs in i ett av fälten Blockering av webbplats med nyckelord.

"; Internet_IP= new Array(); Internet_IP[0] = "From
Internet IP Address"; Internet_IP[1] = "Från
Internet IP-adress"; Protocol= new Array(); Protocol[0] = "Protocol"; Protocol[1] = "Protokoll"; Port_Number= new Array(); Port_Number[0] = "Port Number"; Port_Number[1] = "Portnummer"; Internal_IP= new Array(); Internal_IP[0] = "To
Internal IP Address"; Internal_IP[1] = "Till
Intern IP-adress"; Router= new Array(); Router[0] = "Router"; Router[1] = "Router"; Local_Network= new Array(); Local_Network[0] = "Local Network"; Local_Network[1] = "Lokalt nätverk"; System_Performance= new Array(); System_Performance[0] = "System Performance"; System_Performance[1] = "Systemprestanda"; VPN_Clients= new Array(); VPN_Clients[0] = "VPN Clients"; VPN_Clients[1] = "VPN-klienter"; Information= new Array(); Information[0] = "Information"; Information[1] = "Information"; WAN_Connections= new Array(); WAN_Connections[0] = "WAN Connections"; WAN_Connections[1] = "WAN-anslutningar"; Hardware_Version= new Array(); Hardware_Version[0] = "Hardware Version"; Hardware_Version[1] = "Maskinvaruversion"; Software_Version= new Array(); Software_Version[0] = "Software Version"; Software_Version[1] = "Programvaruversion"; MAC_Address= new Array(); MAC_Address[0] = "MAC Address"; MAC_Address[1] = "MAC-adress"; Local_MAC_Address= new Array(); Local_MAC_Address[0] = "Local MAC Address"; Local_MAC_Address[1] = "Lokal MAC-adress"; System_Up_Time= new Array(); System_Up_Time[0] = "System Up Time"; System_Up_Time[1] = "Systemdriftstid"; Network_Access= new Array(); Network_Access[0] = "Network Access"; Network_Access[1] = "Nätverksåtkomst"; WAN_IP_Address= new Array(); WAN_IP_Address[0] = "WAN IP Address"; WAN_IP_Address[1] = "IP-adress för WAN"; WAN_IP_Expires= new Array(); WAN_IP_Expires[0] = "WAN IP Expires"; WAN_IP_Expires[1] = "IP-adress upphör att gälla"; DNS= new Array(); DNS[0] = "DNS"; DNS[1] = "DNS"; Help_StatusDHCP= new Array(); Help_StatusDHCP[0] = "This screen displays information about your Router and its WAN (Internet) Connections.
The information displayed is the Hardware Version, Software Version,MAC Address, Local MAC Address, and System Up Time.
"; Help_StatusDHCP[1] = "Denna skärmbild visar information om routern och WAN-anslutningarna (Internet).
Den information som visas är maskinvaruversion, programvaruversion, MAC-adress, lokal MAC-adress och systemdriftstid.
"; Help_StatusDHCP1= new Array(); Help_StatusDHCP1[0] = "WAN Connections:The WAN Connections displayed are the Network Access, WAN IP Address,Subnet Mask, Default Gateway, and DNS."; Help_StatusDHCP1[1] = "WAN-anslutningar: De WAN-anslutningar som visas är nätverksåtkomst, IP-adress för WAN, nätmask, standard-gateway och DNS."; Mode= new Array(); Mode[0] = "Mode"; Mode[1] = "Läge"; SSID= new Array(); SSID[0] = "SSID"; SSID[1] = "SSID"; Channel= new Array(); Channel[0] = "Channel"; Channel[1] = "Kanal"; Encryption_Function= new Array(); Encryption_Function[0] = "Encryption Function"; Encryption_Function[1] = "Krypteringsfunktion"; Help_StatusWireless= new Array(); Help_StatusWireless[0] = "The Wireless Network information that is displayed is the MAC Address, Mode, SSID,Channel, and Encryption Function. Click the Refresh button if you want to Refresh your screen."; Help_StatusWireless[1] = "Den information om trådlöst nätverk som visas är MAC-adress, läge, SSID, kanal och krypteringsfunktion. Klicka på knappen Uppdatera om du vill uppdatera skärmbilden."; DHCP_Sever= new Array(); DHCP_Sever[0] = "DHCP Sever"; DHCP_Sever[1] = "DHCP-server"; DHCP_Client_Lease_Info= new Array(); DHCP_Client_Lease_Info[0] = "DHCP Client Lease Info"; DHCP_Client_Lease_Info[1] = "Låneinformation för DHCP-klient"; Help_StatusLan= new Array(); Help_StatusLan[0] = "The Local Network information that is displayed is the IP Address, Subnet Mask,DHCP Server, and DHCP Client Lease Info. To view the DHCP Clients Table,click the DHCP Clients button."; Help_StatusLan[1] = "Den information om lokalt nätverk som visas är IP-adress, nätmask, DHCP-server och låneinformation för DHCP-klient. Om du vill titta på DHCP-klienttabellen klickar du på knappen DHCP-klienter."; Help_StatusSystemPerformance= new Array(); Help_StatusSystemPerformance[0] = "The System Peformance information that is displayed is the Wireless,Internet,and/or LAN information for the IP Address, MAC Address, Connection Status,Packets Received, Packets Sent, Bytes Received, Bytes Sent, Error Packes Received, and Dropped Packets Received."; Help_StatusSystemPerformance[1] = "Den information om systemprestanda som visas är trådlös-, Internet- och/eller LAN-information för IP-Adress, MAC-adress, anslutningsstatus, paket mottagna, paket skickade, byte mottagna, byte skickade, felpaket mottagna och tappade paket mottagna."; Internet_Wireless= new Array(); Internet_Wireless[0] = "Internet / Wireless"; Internet_Wireless[1] = "Internet / Trådlöst"; Help_StatusVPNClients= new Array(); Help_StatusVPNClients[0] = "VPN Client Display: Choose the VPN clients you would like to see. You may display up to 5 clients at a time."; Help_StatusVPNClients[1] = "Visning av VPN-klient: Välj den VPN-klient som du vill titta på. Du kan visa upp till 5 klienter åt gången."; Help_StatusVPNClients1= new Array(); Help_StatusVPNClients1[0] = "The client number assigned serially."; Help_StatusVPNClients1[1] = "Klientnumret tilldelas i nummerordning."; Security_Mode= new Array(); Security_Mode[0] = "Security Mode"; Security_Mode[1] = "Säkerhetsläge"; Authentication_Type= new Array(); Authentication_Type[0] = "Authentication_Type"; Authentication_Type[1] = "Verifieringstyp"; SSID_Interoperability= new Array(); SSID_Interoperability[0] = "SSID Interoperability"; SSID_Interoperability[1] = "SSID-samverkningsförmåga"; RADIUS_Server_IP_Address= new Array(); RADIUS_Server_IP_Address[0] = "RADIUS Server IP Address"; RADIUS_Server_IP_Address[1] = "IP-adress för RADIUS-server "; RADIUS_Server_Port= new Array(); RADIUS_Server_Port[0] = "RADIUS Server Port"; RADIUS_Server_Port[1] = "Port för RADIUS-server"; Shared_Secrect= new Array(); Shared_Secrect[0] = "Shared Secrect"; Shared_Secrect[1] = "Delad hemlighet"; Default_Transmit_Key= new Array(); Default_Transmit_Key[0] = "Default Transmit Key"; Default_Transmit_Key[1] = "Standardöverföringsnyckel"; WEP_Encryption= new Array(); WEP_Encryption[0] = "WEP Encryption"; WEP_Encryption[1] = "WEP-kryptering"; Passphrase= new Array(); Passphrase[0] = "Passphrase"; Passphrase[1] = "Lösenfras"; Key= new Array(); Key[0] = "Key"; Key[1] = "Nyckel"; WPA_Algorithms= new Array(); WPA_Algorithms[0] = "WPA Algorithms"; WPA_Algorithms[1] = "WPA-algoritmer"; WPA_Shared_Key= new Array(); WPA_Shared_Key[0] = "WPA Shared Key"; WPA_Shared_Key[1] = "WPA utdelad nyckel"; Key_Renewal_Timeout= new Array(); Key_Renewal_Timeout[0] = "Key Renewal Timeout"; Key_Renewal_Timeout[1] = "Tidsutlösning för förnyande av nyckel"; Firewall= new Array(); Firewall[0] = "Firewall"; Firewall[1] = "Brandvägg"; Addional_Filters= new Array(); Addional_Filters[0] = "Addional Filters"; Addional_Filters[1] = "Ytterligare filter"; Block_WAN_Requests= new Array(); Block_WAN_Requests[0] = "Block WAN Requests"; Block_WAN_Requests[1] = "Blockera WAN-begäran"; Firewall_Protection= new Array(); Firewall_Protection[0] = "Firewall Protection"; Firewall_Protection[1] = "Brandväggsskydd"; Filte_Proxy= new Array(); Filte_Proxy[0] = "Filte Proxy"; Filte_Proxy[1] = "Filter för proxy"; Filter_Cookies= new Array(); Filter_Cookies[0] = "Filter Cookies"; Filter_Cookies[1] = "Filter för cookies"; Filter_Java_Applets= new Array(); Filter_Java_Applets[0] = "Filter Java Applets"; Filter_Java_Applets[1] = "Filter för Java-appletar"; Filter_ActiveX= new Array(); Filter_ActiveX[0] = "Filter ActiveX"; Filter_ActiveX[1] = "Filter för ActiveX"; Filter_Multicast= new Array(); Filter_Multicast[0] = "Filter Multicast"; Filter_Multicast[1] = "Filter för Multicast"; Block_Internet_Requests= new Array(); Block_Internet_Requests[0] = "Block Anonymous
 Internet Requests"; Block_Internet_Requests[1] = "Blockera anonyma
 Internet-begäran"; Passthrough= new Array(); Passthrough[0] = " Passthrough"; Passthrough[1] = " Genomströmning"; Help_Passthrough= new Array(); Help_Passthrough[0] = "IPSec Passthrough: Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec Passthrough, click the Enabled button.

PPTP Pass Through: Point-to-Point Tunneling Protocol Passthrough is the method used to enable VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP Passthrough, click the Enabled button."; Help_Passthrough[1] = "IPSec-genomströmning: IPSec (Internet Protocol Security) är en uppsättning protokoll som används för att implementera säker utväxling av paket i IP-skiktet. Klicka på knappen Aktiverad för att tillåta IPSec-genomströmning.

PPTP-genomströmning: Metoden PPTP-genomströmning (Point-to-Point Tunneling Protocol) används för att aktivera VPN-sessioner till en Windows NT 4.0- eller 2000-server. Klicka på knappen Aktiverad för att tillåta PPTP-genomströmning."; PPTP_Users= new Array(); PPTP_Users[0] = "PPTP Users"; PPTP_Users[1] = "PPTP-användare"; PPTP_Server= new Array(); PPTP_Server[0] = "PPTP Server"; PPTP_Server[1] = "PPTP-server"; Max_idles_Disconnect= new Array(); Max_idles_Disconnect[0] = "Max idles Time to Disconnect in Minutes"; Max_idles_Disconnect[1] = "Max inaktivitet för urkoppling i minuter"; Authentication_Required= new Array(); Authentication_Required[0] = "Authentication Required"; Authentication_Required[1] = "Verifiering krävs"; Allowed_Authentication_Algorithms= new Array(); Allowed_Authentication_Algorithms[0] = "Allowed Authentication Algorithms"; Allowed_Authentication_Algorithms[1] = "Tillåtna verifieringsalgoritmer"; Encryption_Required= new Array(); Encryption_Required[0] = "Encryption Required"; Encryption_Required[1] = "Kryptering krävs"; Allowed_Encryption_Algorithms= new Array(); Allowed_Encryption_Algorithms[0] = "Allowed Encryption Algorithms"; Allowed_Encryption_Algorithms[1] = "Tillåtna krypteringsalgoritmer"; MPPE_Encryption_Mode= new Array(); MPPE_Encryption_Mode[0] = "MPPE Encryption Mode"; MPPE_Encryption_Mode[1] = "MPPE-krypteringsläge"; Start_IP= new Array(); Start_IP[0] = "Start IP"; Start_IP[1] = "Första IP"; End_IP= new Array(); End_IP[0] = "End IP"; End_IP[1] = "Sista IP"; Remote_Address_Range= new Array(); Remote_Address_Range[0] = "Remote Address Range"; Remote_Address_Range[1] = "Fjärradressintervall"; VPN_Tunnel= new Array(); VPN_Tunnel[0] = "VPN Tunnel"; VPN_Tunnel[1] = "VPN-tunnel"; Local_Secure_Group= new Array(); Local_Secure_Group[0] = "Local Secure Group"; Local_Secure_Group[1] = "Säker lokalgrupp"; Remote_Secure_Group= new Array(); Remote_Secure_Group[0] = "Remote Secure Group"; Remote_Secure_Group[1] = "Säker fjärrgrupp"; Remote_Secure_Gateway= new Array(); Remote_Secure_Gateway[0] = "Remote Secure Gateway"; Remote_Secure_Gateway[1] = "Säker fjärr-gateway"; Key_Management= new Array(); Key_Management[0] = "Key Management"; Key_Management[1] = "Nyckelhantering"; Key_Lifetime= new Array(); Key_Lifetime[0] = "Key Lifetime"; Key_Lifetime[1] = "Livstid för nycklar "; Key_Exchange_Method= new Array(); Key_Exchange_Method[0] = "Key Exchange Method"; Key_Exchange_Method[1] = "Nyckelutbytesmetod"; Authentication= new Array(); Authentication[0] = "Authentication"; Authentication[1] = "Verifiering"; Encryption = new Array(); Encryption[0] = "Encryption"; Encryption[1] = "Kryptering"; Select_Tunnel_Entry= new Array(); Select_Tunnel_Entry[0] = "Select Tunnel Entry"; Select_Tunnel_Entry[1] = "Välj tunnelpost"; VPN_Tunnel= new Array(); VPN_Tunnel[0] = "VPN Tunnel"; VPN_Tunnel[1] = "VPN-tunnel"; VPN_Tunne2= new Array(); VPN_Tunne2[0] = "Set this Tunnel as default gateway"; VPN_Tunne2[1] = "Ställ in denna tunnel som standard-gateway"; VPN_Gateway= new Array(); VPN_Gateway[0] = "VPN Gateway"; VPN_Gateway[1] = "VPN-gateway"; Tunnel_Name= new Array(); Tunnel_Name[0] = "Tunnel Name"; Tunnel_Name[1] = "Tunnelnamn"; Encryption_Algorithm= new Array(); Encryption_Algorithm[0] = "Encryption Algorithm"; Encryption_Algorithm[1] = "Krypteringsalgoritm"; Encryption_Key= new Array(); Encryption_Key[0] = "Encryption Key"; Encryption_Key[1] = "Krypteringsnyckel"; Authentication_Algorithm= new Array(); Authentication_Algorithm[0] = "Authentication Algorithm"; Authentication_Algorithm[1] = "Verifieringsalgoritm"; Authentication_Key= new Array(); Authentication_Key[0] = "Authentication Key"; Authentication_Key[1] = "Verifieringsnyckel"; Inbound= new Array(); Inbound[0] = "Inbound"; Inbound[1] = "Inkommande"; Outbound= new Array(); Outbound[0] = "Outbound"; Outbound[1] = "Utgående"; GatewayAny= new Array(); GatewayAny[0] = "This Gateway accepts request from any IP Address!"; GatewayAny[1] = "Denna gateway accepterar begäran från alla IP-adresser!"; LocalGroupHost= new Array(); LocalGroupHost[0] = "The same as Local Security Gateway setting!"; LocalGroupHost[1] = "Samma inställning som lokal säkerhets-gateway!"; Mask= new Array(); Mask[0] = "Mask"; Mask[1] = "Mask"; RemoteGroupAny= new Array(); RemoteGroupAny[0] = "This Gateway accepts request from any IP Address!"; RemoteGroupAny[1] = "Denna gateway accepterar begäran från alla IP-adresser!"; RemoteSecurity= new Array(); RemoteSecurity[0] = "The same as Remote Security Gateway setting!"; RemoteSecurity[1] = "Samma inställning som fjärr säkerhets-gateway!"; More_DMZ1= new Array(); More_DMZ1[0] = "The DMZ screen allows one local user to be exposed to the Internet for use of a special-purpose service such as Internet gaming and videoconferencing."; More_DMZ1[1] = "Skärmen DMZ ger en lokal användare möjligheten att exponeras mot Internet vid användning av specialtjänster som t.ex. Internetspel och videokonferens."; Software_DMZ= new Array(); Software_DMZ[0] = "Software DMZ"; Software_DMZ[1] = "Programvaru-DMZ"; Private_DMZ_Host_IP= new Array(); Private_DMZ_Host_IP[0] = "Private DMZ Host IP"; Private_DMZ_Host_IP[1] = "Privat värd-IP för DMZ"; Public_DMZ_Host_IP= new Array(); Public_DMZ_Host_IP[0] = "Public DMZ Host IP"; Public_DMZ_Host_IP[1] = "Offentlig värd-IP för DMZ"; Private_IP= new Array(); Private_IP[0] = "Private IP"; Private_IP[1] = "Privat IP"; Public_IP= new Array(); Public_IP[0] = "Public IP"; Public_IP[1] = "Offentlig IP"; Start= new Array(); Start[0] = "Start"; Start[1] = "Start"; End= new Array(); End[0] = "End"; End[1] = "Slut"; More_DMZ2= new Array(); More_DMZ2[0] = "To use this feature, select Enabled. To disable DMZ , select Disabled."; More_DMZ2[1] = "Om du vill använda denna funktion väljer du Aktiverad. Om du vill inaktivera DMZ väljer du Inaktiverad."; DMZ_Host_IP_Address= new Array(); DMZ_Host_IP_Address[0] = "DMZ Host IP Address"; DMZ_Host_IP_Address[1] = "IP-adress till DMZ-värd"; More_DMZ3= new Array(); More_DMZ3[0] = "To expose one PC, enter the computer's IP address. To get the IP address of a computer. Deactivate DMZ by entering a 0 in the field."; More_DMZ3[1] = "Om du vill exponera en persondator så skriver du in datorns IP-adress. För att erhålla IP-adressen för en dator avaktiverar du DMZ genom att skriva in 0 i fältet."; Hardware_DMZ= new Array(); Hardware_DMZ[0] = "Hardware DMZ"; Hardware_DMZ[1] = "Maskinvaru-DMZ"; More_DMZ4= new Array(); More_DMZ4[0] = "To use this feature, select Enabled. Any PC connected to LAN Port1 will be exposed to the Internet. To disable Hardware DMZ , select Disabled."; More_DMZ4[1] = "Om du vill använda denna funktion väljer du Aktiverad. En dator som är ansluten till LAN Port1 kommer att exponeras mot Internet. Om du vill inaktivera Maskinvaru-DMZ väljer du Inaktiverad."; DMZ_Host_IP_Address= new Array(); DMZ_Host_IP_Address[0] = "DMZ Host IP Address"; DMZ_Host_IP_Address[1] = "IP-adress till DMZ-värd"; More_DMZ5= new Array(); More_DMZ5[0] = "Enter the IP Address of the destination in the fields."; More_DMZ5[1] = "Skriv in IP-adressen för målet i fälten."; Triggered_Range= new Array(); Triggered_Range[0] = "Triggered Range"; Triggered_Range[1] = "Utlöst intervall"; Forwarded_Range= new Array(); Forwarded_Range[0] = "Forwarded Range"; Forwarded_Range[1] = "Vidarebefordrat intervall"; Start_Port= new Array(); Start_Port[0] = "Start Port"; Start_Port[1] = "Startport"; End_Port= new Array(); End_Port[0] = "End Port"; End_Port[1] = "Slutport"; Help_AppPT= new Array(); Help_AppPT[0] = "

Port Triggering is used for special Internet applications whose outgoing ports differ from the incoming ports. For this feature, the Router will watch outgoing data for specific port numbers. The Router will remember the IP address of the computer that sends a transmission requesting data, so that when the requested data returns through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules.

Application: Enter the name you wish to give each application.

Start Port and End Port: Enter the starting and ending Triggered range numbers and the Forwarded Range numbers of the port you wish to forward.

Protocol:Select the type of protocol you wish to use for each application:TCP, UDP, or Both.

"; Help_AppPT[1] = "

Portutlösning används för speciella Internettillämpningar vars utgående portar skiljer sig från inkommande portar. Med denna funktion kommer routern att övervaka utgående data för specifika portnummer. Routern kommer ihåg IP-adressen för den dator som skickar en överföring som begär data så att när begärda data återvänder genom routern, dras dessa data tillbaka till rätt dator med hjälp av regler för IP-adress och portmappning.

Tillämpning: Skriv in namnet som du ge till varje tillämpning.

Startport och slutport: Skriv in start- och slutsiffrorna för utlöst intervall och siffrorna för vidarebefordrat intervall för den port som du önskar vidarebefordra.

Protokoll: Välj den protokolltyp som du önskar använda för varje tillämpning:TCP, UDP eller Båda.

"; DHCP_server_disable= new Array(); DHCP_server_disable[0] = "DHCP server disable"; DHCP_server_disable[1] = "Inaktivera DHCP-server"; Start_IP_Address= new Array(); Start_IP_Address[0] = "Start IP Address"; Start_IP_Address[1] = "Första IP-adress"; Number_of_Address= new Array(); Number_of_Address[0] = "Number of Address"; Number_of_Address[1] = "Adressnummer"; IP_Address_Range= new Array(); IP_Address_Range[0] = "IP Address Range"; IP_Address_Range[1] = "IP-adressintervall"; DNS_IP_Address= new Array(); DNS_IP_Address[0] = "DNS IP Address"; DNS_IP_Address[1] = "IP-adress för DNS"; Provide_Real_DNS= new Array(); Provide_Real_DNS[0] = "Provide Real DNS Server"; Provide_Real_DNS[1] = "Provide Real DNS Server"; More_ADWireless1= new Array(); More_ADWireless1[0] = "You may choose between Open and Shared. Please note that all computers on your network must have the same configuration in order to communicate"; More_ADWireless1[1] = "Du kan välja mellan Öppen och Delad. Notera att alla datorer på nätverket måste ha samma konfiguration för att kunna kommunicera"; More_ADWireless2= new Array(); More_ADWireless2[0] = "This defines the basic data rates your router will advertise"; More_ADWireless2[1] = "Detta definierar den grundläggande datahastigheten som din router visar"; More_ADWireless3= new Array(); More_ADWireless3[0] = "This determines the speed with which your router will communicate with wireless clients. Unless your are experiencing difficulties communicating with wireless clients, it is best to leave this setting at Auto."; More_ADWireless3[1] = "Detta fastställer med vilken hastighet som din router kommer att kommunicera med trådlösa klienter. Om du inte har några problemen med att kommunicera med trådlösa klienter är det bäst att lämna denna inställning på Auto."; More_ADWireless4= new Array(); More_ADWireless4[0] = "Determines the interval with which the router will send out wireless beacons to announce its presence."; More_ADWireless4[1] = "Styr intervallet med vilket routern skickar ut trådlösa pejlingar för att anmäla sin närvaro."; More_ADWireless5= new Array(); More_ADWireless5[0] = "Determines the interval with which the router will send out Delivery Time Information Message."; More_ADWireless5[1] = "Styr intervallet med vilket routern skickar ut meddelande om leveransinformation."; More_ADWireless6= new Array(); More_ADWireless6[0] = "Determines the threshold at which the router will send its Request To Send (RTS) signal."; More_ADWireless6[1] = "Styr tröskelvärdet där routern skickar sin RTS-signal."; More_ADWireless7= new Array(); More_ADWireless7[0] = "Determines the threshold at which the router will fragment packets. If you are not experiencing difficulties communicating with other computers on the network,it is best to leave this setting at its default value of 2,347."; More_ADWireless7[1] = "Styr tröskelvärdet där routern fragmenterar paket. Om du inte har några problemen med att kommunicera med andra datorer på nätverket är det bäst att lämna denna inställning på standardvärdet 2,347."; More_Report1= new Array(); More_Report1[0] = "To enable E-Mail Alert, click Enabled."; More_Report1[1] = "Om du vill aktivera e-postvarning klickar du på Aktiverad."; More_Report2= new Array(); More_Report2[0] = "Enter the E-Mail Address for General Logs in the field."; More_Report2[1] = "Skriv in e-postadressen för allmänna loggar i fältet."; More_Report3= new Array(); More_Report3[0] = "Enter the E-Mail Address for Alert Logs in the field."; More_Report3[1] = "Skriv in e-postadressen för varningsloggar i fältet."; More_Report4= new Array(); More_Report4[0] = "Enter the address for the return E-Mail."; More_Report4[1] = "Skriv in returadressen för e-post."; More_Report5= new Array(); More_Report5[0] = "Enter the IP Address of the E-Mail Server in the fields."; More_Report5[1] = "Skriv in IP-adressen för e-postservern i fälten."; More_Report6= new Array(); More_Report6[0] = "You may keep a log of the router's activities. This requires the installation of an external log viewer. To enable Syslog, click Enabled."; More_Report6[1] = "Du kan ha en logg över routeraktiviteten. Detta kräver installation av en extern loggranskare. Om du vill aktivera Syslog klickar du på Aktiverad."; More_Report7= new Array(); More_Report7[0] = "Enter the Device Name in the field. This will make it easier to identify the router."; More_Report7[1] = "Skriv in Enhetsnamn i fältet. Detta gör att det blir enklare att identifiera routern."; More_Report8= new Array(); More_Report8[0] = "Enter the IP Address of the Syslog Server."; More_Report8[1] = "Skriv in IP-adressen för Syslog-server."; More_Report9= new Array(); More_Report9[0] = "Select the priority from the drop-down list."; More_Report9[1] = "Välj prioritet från listrutan."; More_Report10= new Array(); More_Report10[0] = "Enter the number of entries in the log queue in the field."; More_Report10[1] = "Skriv in antalet poster i loggkön i fältet."; More_Report11= new Array(); More_Report11[0] = "Enter the time for the threshold in the field."; More_Report11[1] = "Skriv in tid för tröskelvärde i fältet."; More_Report12= new Array(); More_Report12[0] = "Select the alert log that you want to monitor. Select Syn Flooding, IP Spoofing,Win Nuke, Ping of Death, or Unauthorized Login attempt."; More_Report12[1] = "Välj den varningslogg som du vill övervaka. Välj Syn Flooding, IP Spoofing, Win Nuke, Ping of Death eller Obehörigt inloggningsförsök."; More_Report13= new Array(); More_Report13[0] = "Select the activities you would like to monitor. Select System Error Messages,Deny Policies, Allow Policies, Content Filtering, authorized Login, or Configuration Changes."; More_Report13[1] = "Välj de aktiviteter som du vill övervaka. Välj Systemfelmeddelanden, Neka policy, Tillåt policy, Innehållsfiltrering, godkänd inloggning eller konfigurationsändringar."; More_Admin1= new Array(); More_Admin1[0] = "It is recommended that you change the default password to one of your choice."; More_Admin1[1] = "Du rekommenderas att ändra standardlösenordet till ett eget lösenord."; More_Admin2= new Array(); More_Admin2[0] = "Re-enter the Router's new Password to confirm it."; More_Admin2[1] = "Mata in det nya lösenordet igen för routern för att bekräfta."; More_Admin3= new Array(); More_Admin3[0] = "This feature allows you to access the Router from a remote location, via the Internet."; More_Admin3[1] = "Denna funktion ger dig möjligheten att komma åt routern från en fjärrplats via Internet."; More_Admin4= new Array(); More_Admin4[0] = "This feature allows you to manage the Router from a remote location, via the Internet. To enable Remote Management, click Enabled."; More_Admin4[1] = "Denna funktion ger dig möjligheten att administrera routern från en fjärrplats via Internet. Om du vill aktivera Fjärrhantering klickar du på Aktiverad."; More_Admin5= new Array(); More_Admin5[0] = "Select the port number you will use to remotely access the Router from the drop-down menu. "; More_Admin5[1] = "Välj portnumret som ska användas för fjärråtkomst till routern från listmenyn. "; More_Admin6= new Array(); More_Admin6[0] = "Simple Network Management Protocol (SNMP) is a popular network monitoring and management protocol.To enable SNMP, click Enabled."; More_Admin6[1] = "SNMP (Simple Network Management Protocol) är ett populärt protokoll för övervakning och hantering av nätverk. Om du vill aktivera SNMP klickar du på Aktiverad."; More_Admin7= new Array(); More_Admin7[0] = "In the Contact field, enter contact information for the Router. In the Device Name field, enter the name of the Router. In the Location field, specify the area or location where the Router resides."; More_Admin7[1] = "I fältet för kontakt skriver du in kontaktinformation för routern. I fältet för enhetsnamn skriver du in namnet för routern. I fältet för plats anger du området eller placeringen där routern finns."; More_Admin8= new Array(); More_Admin8[0] = "Enter the name of your Get community."; More_Admin8[1] = "Ange namn för Hämta gruppnamn."; More_Admin9= new Array(); More_Admin9[0] = "Enter the name of your Set community."; More_Admin9[1] = "Ange namn för Ställ in gruppnamn."; More_Admin10= new Array(); More_Admin10[0] = " Enter the name of your Trusted host."; More_Admin10[1] = " Ange namn för Tillförlitlig värd."; More_Admin11= new Array(); More_Admin11[0] = "Enter the name of your Trap community."; More_Admin11[1] = "Ange namn för Gruppnamn för felmeddelanden."; More_Admin12= new Array(); More_Admin12[0] = "Enter the destination IP Address."; More_Admin12[1] = "Ange mål-IP-adressen."; More_Admin13= new Array(); More_Admin13[0] = "UPnP allows Windows XP to automatically configure the Router for various Internet applications,such as gaming and videoconferencing. To enable UPnP, click Enabled."; More_Admin13[1] = "UPnP tillåter att Windows XP konfigurerar routern automatiskt för diverse Internettillämpningar, t.ex. spel och videokonferens. Om du vill aktivera UPnP klickar du på Aktiverad."; More_Admin14= new Array(); More_Admin14[0] = "When enabled, this feature allows you to make manual changes while still using the UPnP feature."; More_Admin14[1] = "När denna funktion är aktiverad kan du göra manuella ändringar samtidigt som du använder UPnP-funktionen."; More_Admin15= new Array(); More_Admin15[0] = "Allow users to disable Internet access: When enabled, this feature allows you to prohibit any and all Internet connections."; More_Admin15[1] = "Tillåt att användare inaktiverar Internetåtkomst: När denna funktion är aktiverad kan du förbjuda alla former av Internetanslutning."; Generating_Key= new Array(); Generating_Key[0] = "Generating Key"; Generating_Key[1] = "Genereringsnyckel"; DHCP_Active_IP_Table= new Array(); DHCP_Active_IP_Table[0] = "DHCP Active IP Table"; DHCP_Active_IP_Table[1] = "DHCP aktiv IP-tabell"; DHCP_Server_IP_Address= new Array(); DHCP_Server_IP_Address[0] = "DHCP Server IP Address"; DHCP_Server_IP_Address[1] = "IP-adress för DHCP-server "; Computer_Name= new Array(); Computer_Name[0] = "Computer Name"; Computer_Name[1] = "Datornamn"; Expires= new Array(); Expires[0] = "Expires"; Expires[1] = "Förfaller"; Help_AppPF= new Array(); Help_AppPF[0] = "The Port Forwarding screen sets up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications may not require any forwarding.)
When users send this type of request to your network via the Internet, the Router will forward those requests to the appropriate PC. Any PC whose port is being forwarded must have its DHCP client function disabled and must have a new static IP address assigned to it because its IP address may change when using the DHCP function."; Help_AppPF[1] = "Skärmen för portvidarebefordran upprättar offentliga tjänster på ditt nätverk som t.ex. webbservrar, ftp-servrar, e-postservrar eller andra specialiserade Internettillämpningar. (Specialiserade Internettillämpningar är alla typer av tillämpningar som använder Internetåtkomst för att utföra funktioner som exempelvis videokonferens eller onlinespel. Vissa Internettillämpningar kräver eventuellt inte vidarebefordran.)
När användare skickar denna typ av begäran till ditt nätverk via Internet, vidarebefordrar routern denna begäran till lämplig persondator. En persondator vars port vidarebefordras måste ha funktionen för DHCP-klient inaktiverad och måste ha en ny statisk IP-adress tilldelad eftersom IP-adressen kan ändras när DHCP-funktionen används."; Application= new Array(); Application[0] = "Application"; Application[1] = "Tillämpning"; Start_and_End= new Array(); Start_and_End[0] = "Start and End"; Start_and_End[1] = "Start och slut"; Protocol= new Array(); Protocol[0] = "Protocol"; Protocol[1] = "Protokoll"; Port_Forwarding= new Array(); Port_Forwarding[0] = "Port Forwarding"; Port_Forwarding[1] = "Portvidarebefordran"; More_AppPF1= new Array(); More_AppPF1[0] = "Enter the name you wish to give each application."; More_AppPF1[1] = "Skriv in namnet som du vill ge till varje tillämpning."; More_AppPF2= new Array(); More_AppPF2[0] = " Enter the starting and ending numbers of the port you wish to forward."; More_AppPF2[1] = " Skriv in start- och slutsiffrorna för den port som du önskar vidarebefordra."; More_AppPF3= new Array(); More_AppPF3[0] = "Select the type of protocol you wish to use for each application: TCP,UDP, or Both."; More_AppPF3[1] = "Välj vilken typ av protokoll du vill använda för varje tillämpning: TCP,UDP eller Båda."; More_AppPF4= new Array(); More_AppPF4[0] = "Enter the IP Address and Click Enabled."; More_AppPF4[1] = "Skriv in IP-adressen och klicka på Aktiverad."; Help_AppUPnPF= new Array(); Help_AppUPnPF[0] = "UPnP  Forwarding can be used to set up public services on your network.When users from the Internet make certain requests on your network, the Router can forward those requests to computers equipped to handle the requests.If,for example, you set the port number 80 (HTTP) to be forwarded to IP Address 192.168.1.2, then all HTTP requests from outside users will be forwarded to 192.168.1.2. You must disable the Router's DHCP function to utilize port forwarding."; Help_AppUPnPF[1] = "UPnP -vidarebefordran kan användas för att upprätt offentliga tjänster på ditt nätverk. När användare på Internet gör en viss typ av begäran på ditt nätverk kan routern vidarebefordra dessa till datorer som är utrustade att hantera denna begäran. Om du till exempel ställer in portnummer 80 (HTTP) för vidarebefordran till IP-adress 192.168.1.2 så kommer en HTTP-begäran från användare utifrån att vidarebefordras till 192.168.1.2. Du måste inaktivera routerns DHCP-funktion för att kunna använda portvidarebefordran."; More_UPnP= new Array(); More_UPnP[0] = "You may use this function to establish a Web server or FTP server via an IP Gateway. In this format, Windows XP can be used to configure this through UPnP communication.  Be sure that you enter a valid IP Address. (You may need to establish a static IP address with your ISP in order to properly run an Internet server.) For added security, Internet users will be able to communicate with the server, but they will not actually be connected. The packets will simply be forwarded through the Router.

To add a server using forwarding:

  1. Enter an arbitrary Application name of the service you want to forward. 
  2. Enter the Ext.Port number. Check with your service application needed for External Port used.
  3. Select the Protocol used by the services.
  4. Enter the Int.Port number used by the application.
  5. Enter the IP Address of the server that you want the Internet users to access. 
  6. Select Enable for that entry.
  7. Click the Save Settings button to save the settings.

To delete a service entry:

  1. Enter a zero number in the Ext.Port and Int.Port, and IP Address from the fields.
  2. Uncheck the TCP and/or UDP check box and the Enable check box.
  3. Clear the Application field.
  4. Click the Save Settings button to save any changes you make."; More_UPnP[1] = "Du kan använda denna funktion för att upprätta en webbserver eller en FTP-server via en IP-gateway. I detta format kan Windows XP användas för att konfigurera detta genom UPnP-kommunikation.  Säkerställ att du anger en giltig IP-adress. (Du behöver eventuellt upprätta en statisk IP-adress hos din Internetleverantör för att kunna använda en Internet-server på rätt sätt.) Ytterligare säkerhet erhålls genom att Internetanvändarna kan kommunicera med servern utan att i realiteten vara anslutna. Paketen kommer helt enkelt bara att vidarebefordras genom routern.

    Så här lägger du till en server som använder vidarebefordran:

    1. Skriv in ett valfritt tillämpningsnamn för den tjänst som du vill vidarebefordra. 
    2. Skriv in numret för Ext.port. Kontrollera din tjänstetillämpning om vilken extern port som ska användas.
    3. Välj vilket Protokoll som ska användas av tjänsten.
    4. Skriv in numret för Int.port som ska användas av tillämpningen.
    5. Skriv in IP-adress för den server som du vill att Internetanvändarna skall använda. 
    6. Välj Aktivera för den posten.
    7. Klicka på knappen Spara inställningar för att spara inställningarna.

    Så här tar du bort en inlagd tjänst :

    1. Skriv in siffran noll i fälten  Ext.port och Int.port och IP-adress.
    2. Avmarkera kryssrutan TCP och/eller UDP och kryssrutan Aktivera.
    3. Töm fältet Tillämpning.
    4. Klicka på knappen Spara inställningar för att spara eventuella ändringar som du gör."; Ext_Port= new Array(); Ext_Port[0] = "Ext.Port"; Ext_Port[1] = "Ext.port"; Int_Port= new Array(); Int_Port[0] = "Int.Port"; Int_Port[1] = "Int.port"; UPnP_Forwarding= new Array(); UPnP_Forwarding[0] = "UPnP Forwarding"; UPnP_Forwarding[1] = "UPnP-vidarebefordran"; Port_Triggering= new Array(); Port_Triggering[0] = "Port Triggering"; Port_Triggering[1] = "Portutlösning"; Port_Range_Forwarding= new Array(); Port_Range_Forwarding[0] = "Port Range Forwarding"; Port_Range_Forwarding[1] = "Vidarebefordran av portintervall "; Port_Range= new Array(); Port_Range[0] = "Port Range"; Port_Range[1] = "Portintervall"; SSID_Broadcast= new Array(); SSID_Broadcast[0] = "SSID Broadcast"; SSID_Broadcast[1] = "Gruppsändning av SSID"; Wireless_SSID= new Array(); Wireless_SSID[0] = "Wireless SSID"; Wireless_SSID[1] = "Trådlös SSID"; More_BWS1= new Array(); More_BWS1[0] = "You may choose Mixed Mode if you have both 802.11b and 802.11g on your network.If you would like to restrict your network to only 802.11b or 802.11g clients, then choose B-Only or G-Only mode."; More_BWS1[1] = "Du kan välja blandat läge om du har både 802.11b och 802.11g på ditt nätverk. Om du vill begränsa ditt nätverk till enbart 802.11b- eller 802.11g-klienter så väljer du läget B-enbart eller G-enbart."; More_BWS2= new Array(); More_BWS2[0] = "The SSID is the unique name shared among all PCs in your network. The SSID must be the same for all the PCs on the network in order for them to communicate with each other."; More_BWS2[1] = "SSID är det unika namn som delas bland alla persondatorer i ditt nätverk. SSID måste vara samma för alla persondatorer i nätverket för att de ska kunna kommunicera med varandra."; More_BWS3= new Array(); More_BWS3[0] = "The channel determines which frequency your network will operate in. If you are experiencing poor performance, try changing to another channel."; More_BWS3[1] = "Kanalen avgör vilken frekvens nätverket ska arbeta med. Om du har problem med prestandan kan du prova med en annan kanal."; More_BWS4= new Array(); More_BWS4[0] = "You may choose to broadcast your SSID to other computers. If you do not wish to broadcast your SSID, choose disable."; More_BWS4[1] = "Du kan välja att gruppsända ditt SSID till andra datorer. Om du inte vill gruppsända ditt SSID väljer du inaktivera."; Internet_Filter_Summary= new Array(); Internet_Filter_Summary[0] = "Internet Filter Summary"; Internet_Filter_Summary[1] = "Sammanfattning av Internetfilter"; No_1= new Array(); No_1[0] = "No."; No_1[1] = "Nr"; Name= new Array(); Name[0] = "Name"; Name[1] = "Namn"; Type= new Array(); Type[0] = "Type"; Type[1] = "Typ"; Time_of_Day= new Array(); Time_of_Day[0] = "Time of Day"; Time_of_Day[1] = "Tid på dagen"; Networked_Computers= new Array(); Networked_Computers[0] = "Networked Computers"; Networked_Computers[1] = "Nätverksdatorer"; Select= new Array(); Select[0] = "Select"; Select[1] = "Välj"; List_of_PCs= new Array(); List_of_PCs[0] = "List of PCs"; List_of_PCs[1] = "Datorlista"; Enter_MAC= new Array(); Enter_MAC[0] = "Enter MAC Address of the PCs in this Format"; Enter_MAC[1] = "Skriv in MAC-adressen för datorerna i detta format"; Enter_IP= new Array(); Enter_IP[0] = "Enter the IP Address of the PCs"; Enter_IP[1] = "Skriv in IP-adressen för datorerna"; Enter_IP_Range= new Array(); Enter_IP_Range[0] = "Enter the IP Range of the PCs"; Enter_IP_Range[1] = "Skriv in IP-intervallet för datorerna"; IP= new Array(); IP[0] = "IP"; IP[1] = "IP"; IP_Range= new Array(); IP_Range[0] = "IP Range"; IP_Range[1] = "IP-intervall"; Save_Settings = new Array(); Save_Settings[0] = "Save Settings"; Save_Settings[1] = "Spara inställningar"; Cancel_Changes = new Array(); Cancel_Changes[0] = "Cancel Changes"; Cancel_Changes[1] = "Avbryt ändringar"; Refresh = new Array(); Refresh[0] = "Refresh"; Refresh[1] = "Uppdatera"; Close = new Array(); Close[0] = "Close"; Close[1] = "Stäng"; Apply= new Array(); Apply[0] = "Apply"; Apply[1] = "Verkställ"; Group= new Array(); Group[0] = "Group"; Group[1] = "Gruppera"; WPA_Pre_Shared_Key= new Array(); WPA_Pre_Shared_Key[0] = "WPA Pre-Shared Key"; WPA_Pre_Shared_Key[1] = "WPA i förväg utdelad nyckel"; WPA_RADIUS= new Array(); WPA_RADIUS[0] = "WPA RADIUS"; WPA_RADIUS[1] = "WPA RADIUS"; RADIUS= new Array(); RADIUS[0] = "RADIUS"; RADIUS[1] = "RADIUS"; WEP= new Array(); WEP[0] = "WEP"; WEP[1] = "WEP"; More_WirelessSec1= new Array(); More_WirelessSec1[0] = "There are two encryption options for WPA Pre-Shared Key, TKIP and AES. TKIP stands for Temporal Key Integrity Protocol. TKIP utilizes dynamic keys and incorporates Message Integrity Code (MIC) to provide protection against hackers. AES stands for Advanced Encryption System, which utilizes a symmetric 128-Bit block data encryption.

      To use WPA Pre-Shared Key, enter a password in the WPA Shared Key field between 8 and 63 characters long. You may also enter a Group Key Renewal Interval time between 0 and 99,999 seconds."; More_WirelessSec1[1] = "Det finns två krypteringsalternativ för WPA i förväg utdelad nyckel, TKIP och AES. TKIP står för Temporal Key Integrity Protocol. TKIP använder dynamiska nycklar och innefattar MIC (Message Integrity Code) för att tillhandahålla skydd mot hackare. AES står för Advanced Encryption System och använder en symmetrisk 128-bitars blockdatakryptering.

      För att använda WPA i förväg utdelad nyckel anger du ett lösenord i fältet WPA utdelad nyckel mellan 8 och 63 tecken långt. Du kan även ange tid för Förnyelseintervall för gruppnyckel mellan 0 och 99 999 sekunder."; More_WirelessSec2= new Array(); More_WirelessSec2[0] = "WPA RADIUS uses an external RADIUS server in conjunction with TKIP or AES to perform user authentication. To use WPA RADIUS, enter the IP address of the RADIUS server, the RADIUS Port (default is 1812) and the shared secret from the RADIUS server."; More_WirelessSec2[1] = "WPA RADIUS använder en extern RADIUS-server i anslutning till TKIP eller AES för att utföra användarverifiering. För att använda WPA RADIUS anger du IP-adressen för RADIUS-servern, RADIUS-porten (standard är 1812) och den delade hemligheten från RADIUS-servern."; More_WirelessSec3= new Array(); More_WirelessSec3[0] = "RADIUS utilizes a RADIUS server for authentication and WEP for data encryption.To utilize RADIUS, enter the IP address of the RADIUS server and its shared secret. Select the desired encryption bit (64 or 128) for WEP and enter either a passphrase or a manual WEP key."; More_WirelessSec3[1] = "RADIUS använder en RADIUS-server för verifiering och WEP för datakryptering. För att använda RADIUS anger du IP-adressen för RADIUS-servern och den delade hemligheten. Välj önskad krypteringsbit (64 eller 128) för WEP och ange antingen en lösenfras eller en manuell WEP-nyckel."; More_WirelessSec4= new Array(); More_WirelessSec4[0] = "There are two levels of WEP encryption, 64-bit and 128-bit. The higher the encryption bit, the more secure your network, however, speed is sacrificed at higher bit levels. To utilize WEP, select the desired encryption bit, and enter a passphrase or a WEP key in hexadecimal format."; More_WirelessSec4[1] = "Det finns två nivåer för WEP-kryptering, 64-bitar och 128-bitar. Ju högre krypteringsbit desto säkrare blir nätverket men hastigheten blir dock lägre vid högre bitnivåer. Om du vill använda WEP väljer du önskad krypteringsbit och anger en lösenfras eller en WEP-nyckel i hexadecimalt format."; Start_Time= new Array(); Start_Time[0] = "Start Time"; Start_Time[1] = "Starttid"; End_Time= new Array(); End_Time[0] = "End Time"; End_Time[1] = "Sluttid"; Duration= new Array(); Duration[0] = "Duration"; Duration[1] = "Varaktighet"; Disconnect= new Array(); Disconnect[0] = "Disconnect"; Disconnect[1] = "Koppla från"; More_VPNCStatus1= new Array(); More_VPNCStatus1[0] = "Displays the username assigned."; More_VPNCStatus1[1] = "Visar tilldelat användarnamn."; More_VPNCStatus2= new Array(); More_VPNCStatus2[0] = "Displays whether the client is Online or Offline."; More_VPNCStatus2[1] = "Visar om klienten är uppkopplad eller frånkopplad."; More_VPNCStatus3= new Array(); More_VPNCStatus3[0] = "Displays the time the user connected to the network."; More_VPNCStatus3[1] = "Visar tidpunkten då användaren anslöt till nätverket."; More_VPNCStatus4= new Array(); More_VPNCStatus4[0] = "Displays the time the user disconnected from the network."; More_VPNCStatus4[1] = "Visar tidpunkten då användaren kopplade ifrån nätverket."; More_VPNCStatus5= new Array(); More_VPNCStatus5[0] = "Displays the total time the user was connected to the network."; More_VPNCStatus5[1] = "Visar den sammanlagda tiden som användaren var ansluten till nätverket."; More_VPNCStatus6= new Array(); More_VPNCStatus6[0] = "Check this box if you would like to terminate the connection of a certain user. Be sure to click on the Disconnect button at the bottom of the screen after you have checked this box."; More_VPNCStatus6[1] = "Markera denna ruta om du vill avsluta anslutningen för en viss användare. Se till att klicka på knappen Koppla ifrån längst ned på skärmbilden efter du har markerat denna ruta."; More_VPNCAccess1= new Array(); More_VPNCAccess1[0] = "You can allow remote users to easily establish a VPN connection to your router using the Linksys VPN Client utility to access resources on your local network."; More_VPNCAccess1[1] = "Du kan tillåta fjärranvändare att enkelt upprätta en VPN-anslutning till din router med hjälp av Linksys verktyg för VPN-klient för åtkomst till resurser på ditt lokala nätverk."; More_VPNCAccess2= new Array(); More_VPNCAccess2[0] = "Enter the user name.User name can be any keyboard characters."; More_VPNCAccess2[1] = "Skriv in användarnamnet. Användarnamnet kan bestå av vilka tangentbordstecken som helst."; More_VPNCAccess3= new Array(); More_VPNCAccess3[0] = "Enter the password you would like to assign to this user."; More_VPNCAccess3[1] = "Skriv in det lösenord som du vill tilldela till denna användare."; More_VPNCAccess4= new Array(); More_VPNCAccess4[0] = "Retype the password to ensure it has been entered correctly."; More_VPNCAccess4[1] = "Skriv in lösenordet igen för att säkerställa att det har skrivits in på rätt sätt."; More_VPNCAccess5= new Array(); More_VPNCAccess5[0] = "Choose Yes, if you would like to allow the user to change their password. Choose No if you would like to maintain the password for them."; More_VPNCAccess5[1] = "Välj Ja om du vill låta användarna ändra sina lösenord. Välj Nej om du vill hantera lösenorden åt dem."; More_VPNCAccess6= new Array(); More_VPNCAccess6[0] = "Click this button after you have finished setting up the user account."; More_VPNCAccess6[1] = "Klicka på den här knappen när du är klar med inställningarna av användarkontot."; More_VPNCAccess7= new Array(); More_VPNCAccess7[0] = "Choose the VPN Clients you would like to display. You may display up to 5 clients at a time."; More_VPNCAccess7[1] = "Välj de VPN-klienter som du vill visa. Du kan visa upp till 5 klienter åt gången."; More_VPNCAccess8= new Array(); More_VPNCAccess8[0] = "The client number assigned serially."; More_VPNCAccess8[1] = "Klientnumret tilldelas i nummerordning."; More_VPNCAccess9= new Array(); More_VPNCAccess9[0] = "This box must be checked in order for the client to connect to your network. You may uncheck this box to temporarily disable access to a certain user."; More_VPNCAccess9[1] = "Den här rutan måste vara markerad för att klienten ska kunna ansluta till ditt nätverk. Du kan avmarkera den här rutan för att tillfälligt inaktivera åtkomsten för en viss användare."; More_VPNCAccess10= new Array(); More_VPNCAccess10[0] = "Displays the username assigned."; More_VPNCAccess10[1] = "Visar tilldelat användarnamn."; More_VPNCAccess11= new Array(); More_VPNCAccess11[0] = "This field is masked for security reasons."; More_VPNCAccess11[1] = "Detta fält maskeras av säkerhetsskäl."; More_VPNCAccess12= new Array(); More_VPNCAccess12[0] = "Click this button if you wish to change any information for this user."; More_VPNCAccess12[1] = "Klicka på den här knappen om du vill ändra informationen för denna användare."; More_VPNCAccess13= new Array(); More_VPNCAccess13[0] = "Click this button if you wish to permanently disable access for a user."; More_VPNCAccess13[1] = "Klicka på den här knappen om du permanent önskar inaktivera åtkomsten för en användare."; Confirm_Password= new Array(); Confirm_Password[0] = "Confirm Password"; Confirm_Password[1] = "Bekräfta lösenord"; Add_Save= new Array(); Add_Save[0] = "Add/Save"; Add_Save[1] = "Lägg till/Spara"; VPN_Client_Users= new Array(); VPN_Client_Users[0] = "VPN Client Users"; VPN_Client_Users[1] = "Användare av VPN-klient"; Active= new Array(); Active[0] = "Active"; Active[1] = "Aktiva"; Edit= new Array(); Edit[0] = "Edit"; Edit[1] = "Redigera"; Remove= new Array(); Remove[0] = "Remove"; Remove[1] = "Ta bort"; and= new Array(); and[0] = "and"; and[1] = "och"; More_SecurityVPN1= new Array(); More_SecurityVPN1[0] = "Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec Passthrough, click the Enabled button."; More_SecurityVPN1[1] = "IPSec (Internet Protocol Security) är en uppsättning protokoll som används för att implementera säker utväxling av paket i IP-skiktet. Klicka på knappen Aktiverad för att tillåta IPSec-genomströmning."; More_SecurityVPN2= new Array(); More_SecurityVPN2[0] = " PPTP PassThrough: Point-to-Point Tunneling Protocol Passthrough is the method used to enable VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP Passthrough, click the Enabled button."; More_SecurityVPN2[1] = " PPTP-genomströmning: Metoden PPTP-genomströmning (Point-to-Point Tunneling Protocol) används för att aktivera VPN-sessioner till en Windows NT 4.0- eller 2000-server. Klicka på knappen Aktiverad för att tillåta PPTP-genomströmning."; More_SecurityVPN3= new Array(); More_SecurityVPN3[0] = "Layering 2 Tunneling Protocol Passthrough is an extension of the Point-to-Point Tunneling Protocol (PPTP) used by to enable the operation of a virtual private network (VPN) over the Internet. To allow L2TP Passthrough, click the Enabled button."; More_SecurityVPN3[1] = "L2TP-genomströmning (Layering 2 Tunneling Protocol Passthrough) är en utvidgning av PPTP (Point-to-Point Tunneling Protocol) och används för att möjliggöra användningen av ett virtuellt privat nätverk (VPN) över Internet. Klicka på knappen Aktiverad för att tillåta L2TP-genomströmning."; More_SecurityVPN4= new Array(); More_SecurityVPN4[0] = "The VPN Router creates a tunnel or channel between two endpoints, so that the data or information between these endpoints is secure.

      To establish this tunnel, select the tunnel you wish to create in the Select Tunnel Entry drop-down box. Click Enabled to enable the tunnel. Once the tunnel is enabled, enter the name of the tunnel in the Tunnel Name field."; More_SecurityVPN4[1] = "VPN-routern skapar en tunnel eller kanal mellan två slutpunkter så att data eller informationen mellan dessa slutpunkter är säker.

      För att etablera denna tunnel väljer du den tunnel som du vill skapa i den nedrullningsbara rutan Välj tunnelpost. Klicka på Aktiverad för att aktivera tunneln. När tunneln är aktiverad skriver du in namnet på tunneln i fältet Tunnelnamn."; More_SecurityVPN6= new Array(); More_SecurityVPN6[0] = "The Local Secure Group is the computer(s) on your LAN that can access the tunnel. Enter the IP Address and Subnet Mask of the local VPN Router in the fields."; More_SecurityVPN6[1] = "Säker lokalgrupp är den dator/datorerna på ditt LAN som kan ansluta till tunneln. Skriv in IP-adress och Nätmask för den lokala VPN-routern i fälten."; More_SecurityVPN7= new Array(); More_SecurityVPN7[0] = "The Remote Security Gateway is the VPN device, such as a second VPN Router,on the remote end of the VPN tunnel. Enter the IP Address of the VPN device at the other end of the tunnel. Make sure that you have entered the IP Address correctly, or the connection cannot be made. Remember, this is NOT the IP Address of the local VPN Router, but the IP Address of the Remote VPN Router or device with which you wish to communicate."; More_SecurityVPN7[1] = "Säker fjärr-gateway är den VPN-enhet (t.ex. en andra VPN-router) i den bortre ändan av en VPN-tunnel. Skriv in IP-adressen för VPN-enheten i den bortre ändan av tunneln. Säkerställ att du har skrivit in IP-adressen på rätt sätt. I annat fall går det inte att upprätta någon anslutning. Tänk på att det inte är IP-adressen för den lokala VPN-routern utan IP-adressen för den fjärr-VPN-router eller enhet som du önskar kommunicera med."; More_SecurityVPN8= new Array(); More_SecurityVPN8[0] = "Using Encryption also helps make your connection more secure. There are two different types of encryption: DES or 3DES. You may choose either of these,but it must be the same type of encryption that is being used by the VPN device at the other end of the tunnel."; More_SecurityVPN8[1] = "Användningen av kryptering hjälper också till att göra din anslutning säkrare. Det finns två olika typer av kryptering: DES eller 3DES. Det är valfritt vilken du väljer men det måste vara samma typ av kryptering som används av VPN-enheten i den andra änden av tunneln."; More_SecurityVPN9= new Array(); More_SecurityVPN9[0] = "Authentication acts as another level of security. There are two types of authentication:MD5 and SHA. Choose the type of encryption your network uses."; More_SecurityVPN9[1] = "Verifiering fungerar som ytterligare en säkerhetsnivå. Det finns två typer av verifiering:MD5 och SHA. Välj den typ av kryptering som ditt nätverk använder."; More_SecurityVPN10= new Array(); More_SecurityVPN10[0] = "Select Auto (IKE) and enter a series of numbers or letters in the Pre-shared Key field. Check the box next to PFS (Perfect Forward Secrecy) to ensure that the initial key exchange and IKE proposals are secure. You may use any combination of up to 24 numbers or letters in this field. No special characters or spaces are allowed. In the Key Lifetime field, you may optionally select to have the key expire at the end of a time period of your choosing."; More_SecurityVPN10[1] = "Välj Auto (IKE) och skriv in en serie med siffror och bokstäver i fältet I förväg utdelad nyckel. Markera rutan bredvid PFS (Perfect Forward Secrecy) för att säkerställa att det ursprungliga nyckelutbytet och IKE-förslagen är säkra. Du kan använda valfri kombination av upp till 24 siffror och bokstäver i detta fält. Specialtecken eller mellanslag är inte tillåtna. I fältet Livstid för nyckel har du möjligheten att välja att nyckeln ska förfalla i slutet av den tidsperiod som du väljer."; More_SecurityVPN11= new Array(); More_SecurityVPN11[0] = "Click the Advanced VPN Tunnel Setup key and the Advanced VPN Tunnel Setup screen will appear."; More_SecurityVPN11[1] = "Klicka på knappen Avancerade inställningar för VPN-tunnel så visas skärmbilden för avancerade inställningar för VPN-tunnel."; More_Firewall1= new Array(); More_Firewall1[0] = "You may choose to enable or disable the routers Stateful Packet Inspection(SPI) firewall. Your network will become less secure if you choose to disable this setting."; More_Firewall1[1] = "Du kan välja att aktivera eller inaktivera routerns SPI-brandvägg (Stateful Packet Inspection). Ditt nätverk blir mindre säkert om du väljer att inaktivera denna inställning."; More_Firewall2= new Array(); More_Firewall2[0] = "Use of WAN proxy servers may compromise the Router's security. Denying Filter Proxy will disable access to any WAN proxy servers. To enable proxy filtering,click Enabled."; More_Firewall2[1] = "Användningen av WAN-proxyservrar kan äventyra routerns säkerhet. Genom att neka filter för proxy så inaktiveras åtkomsten till alla WAN-proxyservrar. Om du vill aktivera filtrering av proxy klickar du på Aktiverad."; More_Firewall3= new Array(); More_Firewall3[0] = "A cookie is data stored on your PC and used by Internet sites when you interact with them. To enable cookie filtering, click Enabled."; More_Firewall3[1] = "En cookie är data som lagras på din dator och används av en webbplats när du besöker den. Om du vill aktivera filtrering av cookies klickar du på Aktiverad."; More_Firewall4= new Array(); More_Firewall4[0] = "Java is a programming language for websites. If you deny Java Applets, you run the risk of not having access to Internet sites created using this programming language. To enable Java Applet filtering, click Enabled."; More_Firewall4[1] = "Java är ett programmeringsspråk för webbplatser. Om du nekar Java-appletar riskerar du att inte kunna nå webbplatser som har skapats med hjälp av detta programmeringsspråk. Om du vill aktivera filtrering av Java-appletar klickar du på Aktiverad."; More_Firewall5= new Array(); More_Firewall5[0] = " ActiveX is a programming language for websites. If you deny ActiveX, you run the risk of not having access to Internet sites created using this programming language. To enable ActiveX filtering, click Enabled."; More_Firewall5[1] = " ActiveX är ett programmeringsspråk för webbplatser. Om du nekar ActiveX riskerar du att inte kunna nå webbplatser som har skapats med hjälp av detta programmeringsspråk. Om du vill aktivera filtrering av ActiveX klickar du på Aktiverad."; More_Firewall6= new Array(); More_Firewall6[0] = "Multicasting allows for multiple transmissions to specific recipients at the same time.If multicasting is permitted, then the Router will allow IP multicast packets to be forwarded to the appropriate computers. Select Enabledto filter multicasting."; More_Firewall6[1] = "Multicasting möjliggör flera överföringar till specifika mottagare på samma gång. Om multicasting är tillåtet kommer routern att tillåta IP-paket med multicasting för vidarebefordran till rätt datorer. Välj Aktiveradför filtrering av multicasting."; More_Firewall7= new Array(); More_Firewall7[0] = "This keeps your network from being "pinged" or detected and reinforces your network security by hiding your network ports, so it is more difficult for intruders to work their way into your network. Select Enabledto block anonymous Internet requests."; More_Firewall7[1] = "Detta förhindrar att ditt nätverk blir "pingat" eller upptäckt och förstärker nätverkssäkerheten genom att dölja nätverksportarna exså att det blir svårare för inkräktare att arbeta sig in i nätverket. Välj Aktiveradför att blockera anonym Internetbegäran."; Download_Router_Configuration_File= new Array(); Download_Router_Configuration_File[0] = "Download Router Configuration File"; Download_Router_Configuration_File[1] = "Hämta routerkonfigurationsfil"; Load= new Array(); Load[0] = "Load"; Load[1] = "Läs in"; Upgrade= new Array(); Upgrade[0] = "Upgrade"; Upgrade[1] = "Uppgradera"; Delete_This_Entry= new Array(); Delete_This_Entry[0] = "Delete This Entry"; Delete_This_Entry[1] = "Ta bort denna post"; Show_Routing_Table= new Array(); Show_Routing_Table[0] = "Show Routing Table"; Show_Routing_Table[1] = "Visa routingtabell"; Clone_My_MAC_Address= new Array(); Clone_My_MAC_Address[0] = "Clone My MAC Address"; Clone_My_MAC_Address[1] = "Klona min MAC-adress"; Edit_List= new Array(); Edit_List[0] = "Edit List"; Edit_List[1] = "Redigera lista"; Delete= new Array(); Delete[0] = "Delete"; Delete[1] = "Ta bort"; Summary= new Array(); Summary[0] = "Summary"; Summary[1] = "Sammanfattning"; Add_Edit_Service= new Array(); Add_Edit_Service[0] = "Add Edit Service"; Add_Edit_Service[1] = "Lägg till Redigera Tjänst"; Start_Test= new Array(); Start_Test[0] = "Start Test"; Start_Test[1] = "Starta test"; Abort_Test= new Array(); Abort_Test[0] = "Abort Test"; Abort_Test[1] = "Avbryt test"; Clear_Result= new Array(); Clear_Result[0] = "Clear Result"; Clear_Result[1] = "Rensa resultat"; DHCP_Release= new Array(); DHCP_Release[0] = "DHCP Release"; DHCP_Release[1] = "DHCP-frigöring"; DHCP_Renew= new Array(); DHCP_Renew[0] = "DHCP Renew"; DHCP_Renew[1] = "DHCP-förnya"; DHCP_Clients_Table= new Array(); DHCP_Clients_Table[0] = "DHCP Clients Table"; DHCP_Clients_Table[1] = "DHCP-klienttabell"; Automatic_Configuration_DHCP = new Array(); Automatic_Configuration_DHCP[0] = "Automatic Configuration - DHCP"; Automatic_Configuration_DHCP[1] = "Automatisk konfiguration - DHCP"; Static_IP= new Array(); Static_IP[0] = "Static IP"; Static_IP[1] = "Statisk IP"; Relay= new Array(); Relay[0] = "Relay"; Relay[1] = "Relay"; Jan= new Array(); Jan[0] = "Jan"; Jan[1] = "Jan"; Feb= new Array(); Feb[0] = "Feb"; Feb[1] = "Feb"; Mar = new Array(); Mar[0] = "Mar"; Mar[1] = "Mar"; Apr = new Array(); Apr[0] = "Apr"; Apr[1] = "Apr"; May = new Array(); May[0] = "May"; May[1] = "Maj"; Jun = new Array(); Jun[0] = "Jun"; Jun[1] = "Jun"; Jul = new Array(); Jul[0] = "Jul"; Jul[1] = "Jul"; Aug = new Array(); Aug[0] = "Aug"; Aug[1] = "Aug"; Sep= new Array(); Sep[0] = "Sep"; Sep[1] = "Sep"; Oct = new Array(); Oct[0] = "Oct"; Oct[1] = "Okt"; Nov = new Array(); Nov[0] = "Nov"; Nov[1] = "Nov"; Dec = new Array(); Dec[0] = "Dec"; Dec[1] = "Dec"; Time_Zone1= new Array(); Time_Zone1[0] = "Kwajalein"; Time_Zone1[1] = "Kwajalein"; Time_Zone2= new Array(); Time_Zone2[0] = "Midway Island, Samoa"; Time_Zone2[1] = "Midway-öarna, Samoa"; Time_Zone3= new Array(); Time_Zone3[0] = "Hawaii"; Time_Zone3[1] = "Hawaii"; Time_Zone4= new Array(); Time_Zone4[0] = "Alaska"; Time_Zone4[1] = "Alaska"; Time_Zone5= new Array(); Time_Zone5[0] = "Pacific Time (USA & Canada)"; Time_Zone5[1] = "Pacific Time (USA och Kanada)"; Time_Zone6= new Array(); Time_Zone6[0] = "Arizona"; Time_Zone6[1] = "Arizona"; Time_Zone7= new Array(); Time_Zone7[0] = "Mountain Time (USA & Canada)"; Time_Zone7[1] = "Pacific Time (USA och Kanada)"; Time_Zone8= new Array(); Time_Zone8[0] = "Mexico"; Time_Zone8[1] = "Mexiko"; Time_Zone9= new Array(); Time_Zone9[0] = "Central Time (USA & Canada)"; Time_Zone9[1] = "Central Time (USA och Kanada)"; Time_Zone10= new Array(); Time_Zone10[0] = "Indiana East, Colombia, Panama"; Time_Zone10[1] = "Indiana öst, Colombia, Panama"; Time_Zone11= new Array(); Time_Zone11[0] = "Eastern Time (USA & Canada)"; Time_Zone11[1] = "Eastern Time (USA och Kanada)"; Time_Zone12= new Array(); Time_Zone12[0] = "Bolivia, Venezuela"; Time_Zone12[1] = "Bolivia, Venezuela"; Time_Zone13= new Array(); Time_Zone13[0] = "Atlantic Time (Canada), Brazil West"; Time_Zone13[1] = "Atlantic Time (Canada), Brasilien väst"; Time_Zone14= new Array(); Time_Zone14[0] = "Guyana"; Time_Zone14[1] = "Guyana"; Time_Zone15= new Array(); Time_Zone15[0] = "Brazil East, Greenland"; Time_Zone15[1] = "Brasilien öst, Grönland"; Time_Zone16= new Array(); Time_Zone16[0] = "Mid-Atlantic"; Time_Zone16[1] = "Mid-Atlantic"; Time_Zone17= new Array(); Time_Zone17[0] = "Azores"; Time_Zone17[1] = "Azorerna"; Time_Zone18= new Array(); Time_Zone18[0] = "Gambia, Liberia, Morocco"; Time_Zone18[1] = "Gambia, Liberia, Marocko"; Time_Zone19= new Array(); Time_Zone19[0] = "England"; Time_Zone19[1] = "England"; Time_Zone20= new Array(); Time_Zone20[0] = "Tunisia"; Time_Zone20[1] = "Tunisien"; Time_Zone21= new Array(); Time_Zone21[0] = "France, Germany, Sweden, Finland"; Time_Zone21[1] = "Frankrike, Tyskland, Sverige, Finland"; Time_Zone22=new Array(); Time_Zone22[0] = "South Africa"; Time_Zone22[1] = "Sydafrika"; Time_Zone23=new Array(); Time_Zone23[0] = "Greece, Ukraine, Romania, Turkey"; Time_Zone23[1] = "Grekland, Ukraina, Rumänien, Turkiet"; Time_Zone24=new Array(); Time_Zone24[0] = "Iraq, Jordan, Kuwait"; Time_Zone24[1] = "Irak, Jordanien, Kuwait"; Time_Zone25=new Array(); Time_Zone25[0] = "Armenia"; Time_Zone25[1] = "Armenien"; Time_Zone26=new Array(); Time_Zone26[0] = "Pakistan, Russia"; Time_Zone26[1] = "Pakistan, Ryssland"; Time_Zone27=new Array(); Time_Zone27[0] = "Bangladesh, Russia"; Time_Zone27[1] = "Bangladesh, Ryssland"; Time_Zone28=new Array(); Time_Zone28[0] = "Thailand, Russia"; Time_Zone28[1] = "Thailand, Ryssland"; Time_Zone29=new Array(); Time_Zone29[0] = "China, Hong Kong, Australia Western"; Time_Zone29[1] = "Kina, Hongkong, Australien väst"; Time_Zone30=new Array(); Time_Zone30[0] = "Singapore, Taiwan, Russia"; Time_Zone30[1] = "Singapore, Taiwan, Ryssland"; Time_Zone31=new Array(); Time_Zone31[0] = "Japan, Korea"; Time_Zone31[1] = "Japan, Korea"; Time_Zone32=new Array(); Time_Zone32[0] = "Guam, Russia"; Time_Zone32[1] = "Guam, Ryssland"; Time_Zone33=new Array(); Time_Zone33[0] = "Australia"; Time_Zone33[1] = "Australien"; Time_Zone34=new Array(); Time_Zone34[0] = "Solomon Islands"; Time_Zone34[1] = "Salomonöarna"; Time_Zone35=new Array(); Time_Zone35[0] = "Fiji"; Time_Zone35[1] = "Fiji"; Time_Zone36=new Array(); Time_Zone36[0] = "New Zealand"; Time_Zone36[1] = "Nya Zeeland"; Gateway= new Array(); Gateway[0] = "Gateway"; Gateway[1] = "Gateway"; Router= new Array(); Router[0] = "Router"; Router[1] = "Router"; Broadcast= new Array(); Broadcast[0] = "Broadcast"; Broadcast[1] = "Gruppsändning"; Multicast= new Array(); Multicast[0] = "Multicast"; Multicast[1] = "Multicast"; None= new Array(); None[0] = "None"; None[1] = "Ingen"; Both= new Array(); Both[0] = "Both"; Both[1] = "Båda"; Internet= new Array(); Internet[0] = "Internet"; Internet[1] = "Internet"; Only= new Array(); Only[0] = "Only"; Only[1] = "Endast"; Mixed= new Array(); Mixed[0] = "Mixed"; Mixed[1] = "Blandat"; Disable= new Array(); Disable[0] = "Disable"; Disable[1] = "Inaktivera"; Open_System= new Array(); Open_System[0] = "Open System"; Open_System[1] = "Öppet System"; Hex_64_bits = new Array(); Hex_64_bits[0] = "64 bits (10 hex digits)"; Hex_64_bits[1] = "64 bitar (10 hexsiffror)"; Hex_128_bits = new Array(); Hex_128_bits[0] = "128 bits (26 hex digits)"; Hex_128_bits[1] = "128 bitar (26 hexsiffror)"; Generate= new Array(); Generate[0] = "Generate"; Generate[1] = "Generera"; Shared_Key= new Array(); Shared_Key[0] = "Share Key"; Shared_Key[1] = "Dela nyckel"; WPAPSK= new Array(); WPAPSK[0] = "WPAPSK"; WPAPSK[1] = "WPAPSK"; Mbps= new Array(); Mbps[0] = "Mbps"; Mbps[1] = "Mbps"; All= new Array(); All[0] = "All"; All[1] = "Alla"; Enable= new Array(); Enable[0] = "Enable"; Enable[1] = "Aktivera"; Stateful= new Array(); Stateful[0] = "Stateful"; Stateful[1] = "Tillståndskänslig"; Stateless= new Array(); Stateless[0] = "Stateless"; Stateless[1] = "Tillståndslös"; Inbound_Traffic= new Array(); Inbound_Traffic[0] = "Inbound Traffic"; Inbound_Traffic[1] = "Inkommande trafik"; Internet_Access1= new Array(); Internet_Access1[0] = "Internet Access"; Internet_Access1[1] = "Internetåtkomst"; Destination_LAN_IP= new Array(); Destination_LAN_IP[0] = "Destination LAN IP"; Destination_LAN_IP[1] = "Destinationens LAN-IP"; Routing_Table_Entry_List= new Array(); Routing_Table_Entry_List[0] = "Routing Table Entry List"; Routing_Table_Entry_List[1] = "Postlista för routingtabell"; Interface= new Array(); Interface[0] = "Interface"; Interface[1] = "Gränssnitt"; AM= new Array(); AM[0] = "AM"; AM[1] = "AM"; PM= new Array(); PM[0] = "PM"; PM[1] = "PM"; Service_Name= new Array(); Service_Name[0] = "Service_Name"; Service_Name[1] = "Tjänstnamn"; Add= new Array(); Add[0] = "Add"; Add[1] = "Lägg till"; Modify= new Array(); Modify[0] = "Modify"; Modify[1] = "Ändra"; Cancel= new Array(); Cancel[0] = "Cancel"; Cancel[1] = "Avbryt"; to= new Array(); to[0] = "to"; to[1] = "till"; Any= new Array(); Any[0] = "Any
      "; Any[1] = "Samtliga
      "; Warning= new Array(); Warning[0] = "Warning"; Warning[1] = "Varning"; Error_1= new Array(); Error_1[0] = "Error"; Error_1[1] = "Fel"; Continue_Wait_1 = new Array(); Continue_Wait_1[0] = "Your changes have been saved.
      System Rebooting...Please wait..."; Continue_Wait_1[1] = "Dina ändringar har sparats.
      Systemet startas om...Vänta..."; DDNS_Status1= new Array(); DDNS_Status1[0] = "DDNS is enabled"; DDNS_Status1[1] = "DDNS är aktiverad"; DDNS_Status2= new Array(); DDNS_Status2[0] = "DDNS is disabled"; DDNS_Status2[1] = "DDNS är inaktiverad"; PPTP_User_List= new Array(); PPTP_User_List[0] = "PPTP User List"; PPTP_User_List[1] = "PPTP-användarlista"; General= new Array(); General[0] = "General"; General[1] = "Allmänt"; New_Password= new Array(); New_Password[0] = "New Password"; New_Password[1] = "Nytt lösenord"; Retype_New_Password= new Array(); Retype_New_Password[0] = "Retype New Password"; Retype_New_Password[1] = "Skriv det nya lösenordet igen"; Configure_Mail_Server= new Array(); Configure_Mail_Server[0] = "Configure Mail Server"; Configure_Mail_Server[1] = "Konfigurera e-postserver"; E_mail_Address= new Array(); E_mail_Address[0] = "E-mail Address"; E_mail_Address[1] = "E-postadress"; System_Notify_Level= new Array(); System_Notify_Level[0] = "System Notify Level"; System_Notify_Level[1] = "Nivå för systemmeddelande"; Security_Notify_Level= new Array(); Security_Notify_Level[0] = "Security Notify Level"; Security_Notify_Level[1] = "Nivå för säkerhetsmeddelande"; Edit_Remove= new Array(); Edit_Remove[0] = "Edit/Remove"; Edit_Remove[1] = "Redigera/Ta bort"; System_Security_Level= new Array(); System_Security_Level[0] = "System/Security Level"; System_Security_Level[1] = "System/säkerhetsnivå"; network= new Array(); network[0] = "network"; network[1] = "nätverk"; check_host= new Array(); check_host[0] = "The host name or IP address cannot be empty!"; check_host[1] = "Värdnamn eller IP-adress får inte vara tom!"; check_username= new Array(); check_username[0] = "The username cannot be empty!"; check_username[1] = "Användarnamn får inte vara tomt!"; check_password= new Array(); check_password[0] = "The password cannot be empty!"; check_password[1] = "Lösenord får inte vara tomt!"; check_pre_shared= new Array(); check_pre_shared[0] = "The pre-shared key cannot be empty!"; check_pre_shared[1] = "I förväg utdelad nyckel får inte vara tom!"; enter_username= new Array(); enter_username[0] = "Please enter username!"; enter_username[1] = "Skriv in användarnamn!"; enter_password= new Array(); enter_password[0] = "Please enter password!"; enter_password[1] = "Skriv in lösenord!"; enter_hostname= new Array(); enter_hostname[0] = "Please enter hostname!"; enter_hostname[1] = "Skriv in värdnamn!"; FW_Format= new Array(); FW_Format[0] = "Wrong Firmware Format!!"; FW_Format[1] = "Fel format för inbyggd programvara!!"; Alert_Msg_30 = new Array(); Alert_Msg_30[0] = "Invalid value for IP address !"; Alert_Msg_30[1] = "Ogiltigt värde för IP-adress !"; Alert_Msg_31 = new Array(); Alert_Msg_31[0] = "IP is out of range in [0-255] !"; Alert_Msg_31[1] = "IP-adressen ligger utanför intervallet [0-255] !"; Alert_Msg_32 = new Array(); Alert_Msg_32[0] = "IP range is out of range in [0-255] !"; Alert_Msg_32[1] = "IP-intervallet ligger utanför intervallet [0-255] !"; Alert_Msg_33 = new Array(); Alert_Msg_33[0] = "Invalid hex value"; Alert_Msg_33[1] = "Ogiltigt hex-värde"; Alert_Msg_34 = new Array(); Alert_Msg_34[0] = " found in MAC address "; Alert_Msg_34[1] = " finns i MAC-adress "; Alert_Msg_35 = new Array(); Alert_Msg_35[0] = "MAC is out of range [00 - FF]"; Alert_Msg_35[1] = "MAC ligger utanför intervallet [00 - FF]"; Alert_Msg_36 = new Array(); Alert_Msg_36[0] = "Port is out of range [0 - 65535]"; Alert_Msg_36[1] = "Port ligger utanför intervallet [0-65535]"; Alert_Msg_37 = new Array(); Alert_Msg_37[0] = "Please enter IP address range in [0-255]!"; Alert_Msg_37[1] = "Ange intervallet för IP-adress i [0-255]!"; Alert_Msg_38 = new Array(); Alert_Msg_38[0] = "Invalid Port Range: Start port number must be less than or equal end port number."; Alert_Msg_38[1] = "Ogiltigt portintervall: Portnummer för start måste vara mindre än eller lika med portnummer för slut."; Alert_Msg_39 = new Array(); Alert_Msg_39[0] = "Invalid MAC address format"; Alert_Msg_39[1] = "Ogiltigt format för MAC-adress"; Alert_Msg_40 = new Array(); Alert_Msg_40[0] = "The WAN MAC Address is not correct!!"; Alert_Msg_40[1] = "WAN MAC-adressen är fel!!"; Alert_Msg_42 = new Array(); Alert_Msg_42[0] = "Invalid character ' or \"\""; Alert_Msg_42[1] = "Ogiltigt tecken ' eller \"\""; Alert_Msg_43 = new Array(); Alert_Msg_43[0] = "Invalid character ;"; Alert_Msg_43[1] = "Ogiltigt tecken ;"; Alert_Msg_44 = new Array(); Alert_Msg_44[0] = "Invalid external port value."; Alert_Msg_44[1] = "Ogiltigt externt portvärde."; Alert_Msg_45 = new Array(); Alert_Msg_45[0] = "Invalid internal port value."; Alert_Msg_45[1] = "Ogiltigt internt portvärde."; Alert_Msg_46 = new Array(); Alert_Msg_46[0] = "All 255 is invalid!"; Alert_Msg_46[1] = "Alla 255 är ogiltiga!"; Alert_Msg_47 = new Array(); Alert_Msg_47[0] = "255 is invalid!"; Alert_Msg_47[1] = "255 är ogiltigt!"; Alert_Msg_59 = new Array(); Alert_Msg_59[0] = "Not a MAC address !"; Alert_Msg_59[1] = "Ej en MAC-adress !"; Alert_Msg_1= new Array(); Alert_Msg_1[0] = "Please specify Fragmentation Length"; Alert_Msg_1[1] = "Ange fragmenteringslängd"; Alert_Msg_2= new Array(); Alert_Msg_2[0] = "Invalid Fragmentation length"; Alert_Msg_2[1] = "Ogiltig fragmenteringslängd"; Alert_Msg_3= new Array(); Alert_Msg_3[0] = "Please specify RTS Threshold"; Alert_Msg_3[1] = "Ange tröskelvärde för RTS"; Alert_Msg_4= new Array(); Alert_Msg_4[0] = "Invalid RTS Threshold"; Alert_Msg_4[1] = "Ogiltigt tröskelvärde för RTS"; Alert_Msg_5= new Array(); Alert_Msg_5[0] = "Please specify DTIM Interval"; Alert_Msg_5[1] = "Ange intervall för DTIM"; Alert_Msg_6= new Array(); Alert_Msg_6[0] = "Invalid DTIM Interval"; Alert_Msg_6[1] = "Ogiltigt intervall för DTIM"; Alert_Msg_7= new Array(); Alert_Msg_7[0] = "Please specify Beacon Interval"; Alert_Msg_7[1] = "Ange intervall för Beacon"; Alert_Msg_8= new Array(); Alert_Msg_8[0] = "Invalid Beacon Interval"; Alert_Msg_8[1] = "Ogiltigt intervall för Beacon"; Alert_Msg_9= new Array(); Alert_Msg_9[0] = "Please enter a number!"; Alert_Msg_9[1] = "Skriv ett tal!"; Alert_Msg_10= new Array(); Alert_Msg_10[0] = "The Release Time is out of range [0 - 86400]"; Alert_Msg_10[1] = "Frigöringstiden ligger utanför intervallet [0 - 86400]"; Alert_Msg_11= new Array(); Alert_Msg_11[0] = "Third DNS 1 value is out of range [0 - 255]"; Alert_Msg_11[1] = "Tredje värdet för DNS 1 ligger utanför intervallet [0 - 255]"; Alert_Msg_12= new Array(); Alert_Msg_12[0] = "Fourth DNS 1 value is out of range [0 - 255]"; Alert_Msg_12[1] = "Fjärde värdet för DNS 1 ligger utanför intervallet [0 - 255]"; Alert_Msg_13= new Array(); Alert_Msg_13[0] = "First DNS 2 value is out of range [0 - 255]"; Alert_Msg_13[1] = "Första värdet för DNS 2 ligger utanför intervallet [0 - 255]"; Alert_Msg_14= new Array(); Alert_Msg_14[0] = "Second DNS 2 value is out of range [0 - 255]"; Alert_Msg_14[1] = "Andra värdet för DNS 2 ligger utanför intervallet [0 - 255]"; Alert_Msg_15= new Array(); Alert_Msg_15[0] = "Third DNS 2 value is out of range [0 - 255]"; Alert_Msg_15[1] = "Tredje värdet för DNS 2 ligger utanför intervallet [0 - 255]"; Alert_Msg_16= new Array(); Alert_Msg_16[0] = "Fourth DNS 2 value is out of range [0 - 255]"; Alert_Msg_16[1] = "Fjärde värdet för DNS 2 ligger utanför intervallet [0 - 255]"; Alert_Msg_17= new Array(); Alert_Msg_17[0] = "First DNS 3 value is out of range [0 - 255]"; Alert_Msg_17[1] = "Första värdet för DNS 3 ligger utanför intervallet [0 - 255]"; Alert_Msg_18= new Array(); Alert_Msg_18[0] = "Second DNS 3 value is out of range [0 - 255]"; Alert_Msg_18[1] = "Andra värdet för DNS 3 ligger utanför intervallet [0 - 255]"; Alert_Msg_19= new Array(); Alert_Msg_19[0] = "Third DNS 3 value is out of range [0 - 255]"; Alert_Msg_19[1] = "Tredje värdet för DNS 3 ligger utanför intervallet [0 - 255]"; Alert_Msg_20= new Array(); Alert_Msg_20[0] = "Fourth DNS 3 value is out of range [0 - 255]"; Alert_Msg_20[1] = "Fjärde värdet för DNS 3 ligger utanför intervallet [0 - 255]"; Alert_Msg_21= new Array(); Alert_Msg_21[0] = "First WINS value is out of range [0 - 255]"; Alert_Msg_21[1] = "Första värdet för WINS ligger utanför intervallet [0 - 255]"; Alert_Msg_22= new Array(); Alert_Msg_22[0] = "Second WINS value is out of range [0 - 255]"; Alert_Msg_22[1] = "Andra värdet för WINS ligger utanför intervallet [0 - 255]"; Alert_Msg_23= new Array(); Alert_Msg_23[0] = "Third WINS value is out of range [0 - 255]"; Alert_Msg_23[1] = "Tredje värdet för WINS ligger utanför intervallet [0 - 255]"; Alert_Msg_24= new Array(); Alert_Msg_24[0] = "Fourth WINS value is out of range [0 - 255]"; Alert_Msg_24[1] = "Fjärde värdet för WINS ligger utanför intervallet [0 - 255]"; Alert_Msg_25= new Array(); Alert_Msg_25[0] = "The number of users is out of range [1 - 255]"; Alert_Msg_25[1] = "Antalet användare ligger utanför intervallet [1 - 255]"; Alert_Msg_26= new Array(); Alert_Msg_26[0] = "0 or 255 is invalid"; Alert_Msg_26[1] = "0 eller 255 är ogiltigt"; Alert_Msg_27= new Array(); Alert_Msg_27[0] = "Please enter legal character in [0-9 a-z A-Z]!"; Alert_Msg_27[1] = "Skriv in tillåtna tecken [0-9 a-z A-Z]!"; Alert_Msg_28= new Array(); Alert_Msg_28[0] = "Invalid Port Range: Start port number must be less than end port number."; Alert_Msg_28[1] = "Ogiltigt portintervall: Startportnumret måste vara mindre än slutportnumret."; Alert_Msg_29= new Array(); Alert_Msg_29[0] = "Please select correct time!(AM->AM, AM->PM, PM->PM)"; Alert_Msg_29[1] = "Välj korrekt tid!(AM->AM, AM->PM, PM->PM)"; Alert_Msg_60= new Array(); Alert_Msg_60[0] = "End time must be bigger than begin time!"; Alert_Msg_60[1] = "Sluttid måste vara större än starttid!"; Alert_Msg_61= new Array(); Alert_Msg_61[0] = "Please enter profile name!"; Alert_Msg_61[1] = "Skriv in profilnamn!"; Alert_Msg_62= new Array(); Alert_Msg_62[0] = "Please select the date!"; Alert_Msg_62[1] = "Välj datum!"; Alert_Msg_63= new Array(); Alert_Msg_63[0] = "Port value is out of range [0 - 65535]"; Alert_Msg_63[1] = "Portvärdet ligger utanför intervallet [0 - 65535]"; Alert_Msg_64= new Array(); Alert_Msg_64[0] = "Policy saved!"; Alert_Msg_64[1] = "Policyn sparad!"; Alert_Msg_65= new Array(); Alert_Msg_65[0] = "0 or 255 is invalid!"; Alert_Msg_65[1] = "0 eller 255 är ogiltigt!"; Alert_Msg_66= new Array(); Alert_Msg_66[0] = "Netmask must be 255.255.255.255!"; Alert_Msg_66[1] = "Nätmasken måste vara 255.255.255.255!"; Alert_Msg_67= new Array(); Alert_Msg_67[0] = "Fourth IP address must be 0"; Alert_Msg_67[1] = "Fjärde IP-adressen måste vara 0"; Alert_Msg_68= new Array(); Alert_Msg_68[0] = "Third IP address be 0"; Alert_Msg_68[1] = "Tredje IP-adressen måste vara 0"; Alert_Msg_69= new Array(); Alert_Msg_69[0] = "Second IP address be 0"; Alert_Msg_69[1] = "Andra IP-adressen måste vara 0"; Alert_Msg_70= new Array(); Alert_Msg_70[0] = "Fourth netmask must be 0"; Alert_Msg_70[1] = "Fjärde nätmasken måste vara 0"; Alert_Msg_71= new Array(); Alert_Msg_71[0] = "Third netmask must be 0"; Alert_Msg_71[1] = "Tredje nätmasken måste vara 0"; Alert_Msg_72= new Array(); Alert_Msg_72[0] = "Second netmask must be 0"; Alert_Msg_72[1] = "Andra nätmasken måste vara 0"; Alert_Msg_73= new Array(); Alert_Msg_73[0] = "Please check your data!"; Alert_Msg_73[1] = "Kontrollera dina data!"; Alert_Msg_74= new Array(); Alert_Msg_74[0] = "Invalid gateway address:not in "; Alert_Msg_74[1] = "Ogiltig gateway-adress: inte i "; Alert_Msg_75= new Array(); Alert_Msg_75[0] = "First Destination LAN IP address value is out of range [0 - 255]"; Alert_Msg_75[1] = "Första värdet för destinationens LAN-IP-adress ligger utanför intervallet [0 - 255]"; Alert_Msg_76= new Array(); Alert_Msg_76[0] = "Second Destination LAN IP address value is out of range [0 - 255]"; Alert_Msg_76[1] = "Andra värdet för destinationens LAN-IP-adress ligger utanför intervallet [0 - 255]"; Alert_Msg_77= new Array(); Alert_Msg_77[0] = "Third Destination LAN IP address value is out of range [0 - 255]"; Alert_Msg_77[1] = "Tredje värdet för destinationens LAN-IP-adress ligger utanför intervallet [0 - 255]"; Alert_Msg_78= new Array(); Alert_Msg_78[0] = "Fourth Destination LAN IP address value is out of range [0 - 255]"; Alert_Msg_78[1] = "Fjärde värdet för destinationens LAN-IP-adress ligger utanför intervallet [0 - 255]"; Alert_Msg_79= new Array(); Alert_Msg_79[0] = "First Subnet Mask value is out of range [0 - 255]"; Alert_Msg_79[1] = "Första värdet för nätmask ligger utanför intervallet [0 - 255]"; Alert_Msg_80= new Array(); Alert_Msg_80[0] = "Second Subnet Mask value is out of range [0 - 255]"; Alert_Msg_80[1] = "Andra värdet för nätmask ligger utanför intervallet [0 - 255]"; Alert_Msg_81= new Array(); Alert_Msg_81[0] = "Third Subnet Mask value is out of range [0 - 255]"; Alert_Msg_81[1] = "Tredje värdet för nätmask ligger utanför intervallet [0 - 255]"; Alert_Msg_82= new Array(); Alert_Msg_82[0] = "Fourth Subnet Mask value is out of range [0 - 255]"; Alert_Msg_82[1] = "Fjärde värdet för nätmask ligger utanför intervallet [0 - 255]"; Alert_Msg_83= new Array(); Alert_Msg_83[0] = "First Default Gateway is out of range [0 - 255]"; Alert_Msg_83[1] = "Första standard-gateway ligger utanför intervallet [0 - 255]"; Alert_Msg_84= new Array(); Alert_Msg_84[0] = "Second Default Gateway is out of range [0 - 255]"; Alert_Msg_84[1] = "Andra standard-gateway ligger utanför intervallet [0 - 255]"; Alert_Msg_85= new Array(); Alert_Msg_85[0] = "Third Default Gateway is out of range [0 - 255]"; Alert_Msg_85[1] = "Tredje standard-gateway ligger utanför intervallet [0 - 255]"; Alert_Msg_86= new Array(); Alert_Msg_86[0] = "Fourth Default Gateway is out of range [0 - 255]"; Alert_Msg_86[1] = "Fjärde standard-gateway ligger utanför intervallet [0 - 255]"; Alert_Msg_87= new Array(); Alert_Msg_87[0] = "Please enter the static IP address!"; Alert_Msg_87[1] = "Skriv in en statisk IP-adress!"; Alert_Msg_88= new Array(); Alert_Msg_88[0] = "Please enter IP address!"; Alert_Msg_88[1] = "Skriv in en IP-adress!"; Alert_Msg_89= new Array(); Alert_Msg_89[0] = "Please edit WEP settings first!"; Alert_Msg_89[1] = "Redigera WEP-inställningarna först!"; Alert_Msg_90= new Array(); Alert_Msg_90[0] = "Please enter the correct No. of Pings!"; Alert_Msg_90[1] = "Skriv in korrekt antal pingningar!"; Alert_Msg_91= new Array(); Alert_Msg_91[0] = "Please enter the correct Ping Size!"; Alert_Msg_91[1] = "Skriv in korrekt pingstorlek!"; Alert_Msg_92= new Array(); Alert_Msg_92[0] = "Please enter the correct Ping Interval!"; Alert_Msg_92[1] = "Skriv in korrekt pingintervall!"; Alert_Msg_93= new Array(); Alert_Msg_93[0] = "Please enter the correct Ping Timeout!"; Alert_Msg_93[1] = "Skriv in korrekt pingtidsutlösning!"; Alert_Msg_94= new Array(); Alert_Msg_94[0] = "The router username cannot be empty!"; Alert_Msg_94[1] = "Routerns användarnamn får inte vara tomt!"; Alert_Msg_95= new Array(); Alert_Msg_95[0] = "The router passwords are not same!"; Alert_Msg_95[1] = "Routerns lösenord är olika!"; Alert_Msg_96= new Array(); Alert_Msg_96[0] = "The length of router password is out of range [4 - 63]"; Alert_Msg_96[1] = "Längden på router-lösenordet ligger utanför intervallet [4 - 63]"; Alert_Msg_97= new Array(); Alert_Msg_97[0] = "Please modify your username and password at first to enable remote management!"; Alert_Msg_97[1] = "Ändra först ditt användarnamn och lösenord för att aktivera fjärrhantering!"; Alert_Msg_98= new Array(); Alert_Msg_98[0] = "Please enter Contact!"; Alert_Msg_98[1] = "Ange kontakt!"; Alert_Msg_99= new Array(); Alert_Msg_99[0] = "Please enter Name!"; Alert_Msg_99[1] = "Ange namn!"; Alert_Msg_100= new Array(); Alert_Msg_100[0] = "Please enter Location!"; Alert_Msg_100[1] = "Ange plats!"; Alert_Msg_101= new Array(); Alert_Msg_101[0] = "Please enter SNMP Community!"; Alert_Msg_101[1] = "Ange SNMP-gruppnamn!"; Alert_Msg_102= new Array(); Alert_Msg_102[0] = "Please enter SNMP Trap Community!"; Alert_Msg_102[1] = "Ange SNMP-gruppnamn för felmeddelanden!"; Alert_Msg_103= new Array(); Alert_Msg_103[0] = "The log queue length is out of range [1-16000]!"; Alert_Msg_103[1] = "Längden på loggkön ligger utanför intervallet [1-16000]!"; Alert_Msg_104= new Array(); Alert_Msg_104[0] = "Please Enable WEP First for Shared Key!"; Alert_Msg_104[1] = "Aktivera WEP först för utdelad nyckel!"; Alert_Msg_105= new Array(); Alert_Msg_105[0] = "Please enter a value ranging from 2 to 254."; Alert_Msg_105[1] = "Ange ett värde mellan 2 till 254."; Alert_Msg_106= new Array(); Alert_Msg_106[0] = "Please enter SSID!"; Alert_Msg_106[1] = "Ange SSID!"; Alert_Msg_107= new Array(); Alert_Msg_107[0] = "The same SSID name was be found."; Alert_Msg_107[1] = "Samma SSID-namn hittades."; Alert_Msg_108= new Array(); Alert_Msg_108[0] = "No device information!"; Alert_Msg_108[1] = "Ingen enhetsinformation!"; Alert_Msg_109= new Array(); Alert_Msg_109[0] = "Please enter Service Name!"; Alert_Msg_109[1] = "Ange tjänstnamn!"; Alert_Msg_110= new Array(); Alert_Msg_110[0] = "Please enter start port number!"; Alert_Msg_110[1] = "Skriv in ett startportnummer!"; Alert_Msg_111= new Array(); Alert_Msg_111[0] = "Please enter end port number!"; Alert_Msg_111[1] = "Skriv in ett slutportnummer!"; Alert_Msg_112= new Array(); Alert_Msg_112[0] = "Please do not repeat service name!"; Alert_Msg_112[1] = "Upprepa inte tjänstnamnet!"; Alert_Msg_113= new Array(); Alert_Msg_113[0] = "Please do not repeat protcol and port range!"; Alert_Msg_113[1] = "Upprepa inte protokoll och portintervall!"; Alert_Msg_114= new Array(); Alert_Msg_114[0] = "At least one service!"; Alert_Msg_114[1] = "Minst en tjänst!"; Alert_Msg_115= new Array(); Alert_Msg_115[0] = "The PPTP username cannot be empty!"; Alert_Msg_115[1] = "PPTP-användarnamn får inte vara tomt!"; Alert_Msg_116= new Array(); Alert_Msg_116[0] = "The same PPTP username was existed !"; Alert_Msg_116[1] = "Samma PPTP-användarnamn finns redan!"; Alert_Msg_117= new Array(); Alert_Msg_117[0] = "The PPTP passwords are not same!"; Alert_Msg_117[1] = "PPTP-lösenorden är olika!"; Alert_Msg_118= new Array(); Alert_Msg_118[0] = "The length of password is out of range [4 - 63]"; Alert_Msg_118[1] = "Längden på lösenordet ligger utanför intervallet [4 - 63]"; Alert_Msg_119= new Array(); Alert_Msg_119[0] = "Required Encryption cannot be used with PAP or CHAP Authentication Algorithms."; Alert_Msg_119[1] = "Erforderlig kryptering kan inte användas med PAP- eller CHAP-verifieringsalgoritmer."; Alert_Msg_120= new Array(); Alert_Msg_120[0] = "The SPI range is out of [100-FFFFFFFF]!"; Alert_Msg_120[1] = "SPI-intervallet ligger utanför [100-FFFFFFFF]!"; Alert_Msg_121= new Array(); Alert_Msg_121[0] = "Please enter HEX digits [0-9 A-F]!"; Alert_Msg_121[1] = "Skriv in HEX-siffror [0-9 A-F]!"; Alert_Msg_122= new Array(); Alert_Msg_122[0] = "Please enter "; Alert_Msg_122[1] = "Skriv in "; Alert_Msg_123= new Array(); Alert_Msg_123[0] = "HEX digits!"; Alert_Msg_123[1] = "HEX-siffror!"; Alert_Msg_124= new Array(); Alert_Msg_124[0] = "Please enter the tunnel name!"; Alert_Msg_124[1] = "Ange tunnelnamnet!"; Alert_Msg_125= new Array(); Alert_Msg_125[0] = "Please enter a new tunnel name!"; Alert_Msg_125[1] = "Ange ett nytt tunnelnamn!"; Alert_Msg_126= new Array(); Alert_Msg_126[0] = "Please enter the name for FQDN!"; Alert_Msg_126[1] = "Ange namnet för FQDN!"; Alert_Msg_127= new Array(); Alert_Msg_127[0] = "The MTU size is out of range[68 - 1500]!"; Alert_Msg_127[1] = "MTU-storleken ligger utanför intervallet[68 -1500]!"; Alert_Msg_128= new Array(); Alert_Msg_128[0] = "The value of hour is invalid!"; Alert_Msg_128[1] = "Värdet för timme är ogiltigt!"; Alert_Msg_129= new Array(); Alert_Msg_129[0] = "The value of minute is invalid!"; Alert_Msg_129[1] = "Värdet för minut är ogiltigt!"; Alert_Msg_130= new Array(); Alert_Msg_130[0] = "The value of second is invalid!"; Alert_Msg_130[1] = "Värdet för sekund är ogiltigt!"; Alert_Msg_131= new Array(); Alert_Msg_131[0] = "Please enter a number in the range [0 - 9999]!"; Alert_Msg_131[1] = "Ange ett tal i intervallet [1 - 9999]!"; Alert_Msg_132= new Array(); Alert_Msg_132[0] = "The VPN Client username cannot be empty!"; Alert_Msg_132[1] = "Användarnamnet för VPN-klient får inte vara tomt!"; Alert_Msg_133= new Array(); Alert_Msg_133[0] = "The same VPN Client username was existed !!!"; Alert_Msg_133[1] = "Samma användarnamn för VPN-klient finns redan!"; Alert_Msg_134= new Array(); Alert_Msg_134[0] = "The VPN Client passwords are not same!"; Alert_Msg_134[1] = "Lösenorden för VPN-klient är olika!"; Alert_Msg_135= new Array(); Alert_Msg_135[0] = "Please enable wireless network mode."; Alert_Msg_135[1] = "Aktivera läge för trådlöst nätverk."; Alert_Msg_136= new Array(); Alert_Msg_136[0] = "The Length of Key 1 is invalid"; Alert_Msg_136[1] = "Längden på nyckel 1 är ogiltig"; Alert_Msg_137= new Array(); Alert_Msg_137[0] = "The length of Key 2 is none."; Alert_Msg_137[1] = "Längden på nyckel 2 är ingen."; Alert_Msg_138= new Array(); Alert_Msg_138[0] = "The Length of Key 2 is invalid."; Alert_Msg_138[1] = "Längden på nyckel 2 är ogiltig."; Alert_Msg_139= new Array(); Alert_Msg_139[0] = "The length of Key 3 is none."; Alert_Msg_139[1] = "Längden på nyckel 3 är ingen."; Alert_Msg_140= new Array(); Alert_Msg_140[0] = "The Length of Key 3 is invalid."; Alert_Msg_140[1] = "Längden på nyckel 3 är ogiltig."; Alert_Msg_141= new Array(); Alert_Msg_141[0] = "The length of Key 4 is none."; Alert_Msg_141[1] = "Längden på nyckel 4 är ingen."; Alert_Msg_142= new Array(); Alert_Msg_142[0] = "The Length of Key 4 is invalid."; Alert_Msg_142[1] = "Längden på nyckel 4 är ogiltig."; Alert_Msg_143= new Array(); Alert_Msg_143[0] = "Invalid value "; Alert_Msg_143[1] = "Ogiltigt värde "; Alert_Msg_144= new Array(); Alert_Msg_144[0] = "in key "; Alert_Msg_144[1] = "i nyckel "; Alert_Msg_145= new Array(); Alert_Msg_145[0] = "The Passphrase is empty."; Alert_Msg_145[1] = "Lösenfrasen är tom."; Alert_Msg_146= new Array(); Alert_Msg_146[0] = "The Key length is Non-definition, Please contact with system manager."; Alert_Msg_146[1] = "Nyckellängden är inte definierad. Kontakta systemansvarig."; Alert_Msg_147= new Array(); Alert_Msg_147[0] = "At least one WEP key is required"; Alert_Msg_147[1] = "Minst en WEP-nyckel krävs"; Alert_Msg_148= new Array(); Alert_Msg_148[0] = "The Key 1 is empty."; Alert_Msg_148[1] = "Nyckel 1 är tom."; Alert_Msg_149= new Array(); Alert_Msg_149[0] = "The Key 2 is empty."; Alert_Msg_149[1] = "Nyckel 2 är tom."; Alert_Msg_150= new Array(); Alert_Msg_150[0] = "The Key 3 is empty."; Alert_Msg_150[1] = "Nyckel 3 är tom."; Alert_Msg_151= new Array(); Alert_Msg_151[0] = "The Key 4 is empty."; Alert_Msg_151[1] = "Nyckel 4 är tom."; Alert_Msg_152= new Array(); Alert_Msg_152[0] = "The Length of WPA Shared Key is invalid."; Alert_Msg_152[1] = "Längden på WPA utdelad nyckel är ogiltig."; Alert_Msg_153= new Array(); Alert_Msg_153[0] = " Please enter a valid number!"; Alert_Msg_153[1] = " Ange ett giltigt tal!"; Alert_Msg_157= new Array(); Alert_Msg_157[0] = "The Passphrase is empty." Alert_Msg_157[1] = "The Passphrase is empty." back= new Array(); back[0] = "Back"; back[1] = "Bakåt"; FW_Update= new Array(); FW_Update[0] = "Updating Firmware
      Please wait...."; FW_Update[1] = "Uppdaterar inbyggd programvara
      Vänta...."; Update_Warning= new Array(); Update_Warning[0] = "Warning: Upgrading must not be interrupted."; Update_Warning[1] = "Varning: Uppgraderingen får inte avbrytas."; Config_Uploade= new Array(); Config_Uploade[0] = "Writing Router Configuration File
      Please wait...."; Config_Uploade[1] = "Skriver routerkonfigurationsfil
      Vänta...."; Uploade_Warning= new Array(); Uploade_Warning[0] = "Warning: This process must not be interrupted."; Uploade_Warning[1] = "Varning: Denna process får inte avbrytas."; Config_Format= new Array(); Config_Format[0] = "Wrong Configuration File Format!!"; Config_Format[1] = "Fel format för konfigurationsfil!!"; Continue= new Array(); Continue[0] = "Continue"; Continue[1] = "Fortsätt"; Auto_1= new Array(); Auto_1[0] = "Auto(DFS)"; Auto_1[1] = "Auto (DFS)"; Disconnected= new Array(); Disconnected[0] = "Disconnected"; Disconnected[1] = "Frånkopplad"; Connected= new Array(); Connected[0] = "Connected"; Connected[1] = "Ansluten"; NA= new Array(); NA[0] = "N/A"; NA[1] = "Gäller ej"; VLAN_Performance= new Array(); VLAN_Performance[0] = "VLAN Performance"; VLAN_Performance[1] = "VLAN-prestanda"; Group_Name= new Array(); Group_Name[0] = "Group Name"; Group_Name[1] = "Gruppnamn"; DHCP= new Array(); DHCP[0] = "DHCP"; DHCP[1] = "DHCP"; VLAN_System_Performance= new Array(); VLAN_System_Performance[0] = "VLAN System Performance"; VLAN_System_Performance[1] = "VLAN-systemprestanda"; LAN= new Array(); LAN[0] = "LAN"; LAN[1] = "LAN"; E_mail= new Array(); E_mail[0] = "E-mail"; E_mail[1] = "E-post"; User_Setting= new Array(); User_Setting[0] = "User Setting"; User_Setting[1] = "Användarinställning"; Port= new Array(); Port[0] = "Port"; Port[1] = "Port"; Priority= new Array(); Priority[0] = "Priority"; Priority[1] = "Prioritet"; Main_SSI= new Array(); Main_SSI[0] = "Main SSI"; Main_SSI[1] = "Huvud-SSI"; High= new Array(); High[0] = "High"; High[1] = "Hög"; Medium= new Array(); Medium[0] = "Medium"; Medium[1] = "Medium"; Low= new Array(); Low[0] = "Low"; Low[1] = "Låg"; Main_SSID= new Array(); Main_SSID[0] = "Main SSID"; Main_SSID[1] = "Huvud-SSID"; Virtual_SSID= new Array(); Virtual_SSID[0] = "Virtual SSID"; Virtual_SSID[1] = "Virtuell SSID"; DHCP_Protocol= new Array(); DHCP_Protocol[0] = "DHCP Protocol"; DHCP_Protocol[1] = "DHCP-protokoll"; Group_Settings= new Array(); Group_Settings[0] = "Group Settings"; Group_Settings[1] = "Gruppinställningar"; Wired= new Array(); Wired[0] = "Wired"; Wired[1] = "Trådbunden"; IP_Configuration= new Array(); IP_Configuration[0] = "IP Configuration"; IP_Configuration[1] = "IP-konfiguration"; Connection= new Array(); Connection[0] = "Connection"; Connection[1] = "Anslutning"; Packets_Received= new Array(); Packets_Received[0] = "Packets
       Received"; Packets_Received[1] = "Paket
       mottagna"; Packets_Sent= new Array(); Packets_Sent[0] = "Packets Sent"; Packets_Sent[1] = "Paket skickade"; Bytes_Received= new Array(); Bytes_Received[0] = "Bytes Received"; Bytes_Received[1] = "Byte mottagna"; Error_Packets_Received= new Array(); Error_Packets_Received[0] = "Error Packets
       Received"; Error_Packets_Received[1] = "Felpaket
       mottagna"; Dropped_Packets_Received= new Array(); Dropped_Packets_Received[0] = "Dropped Packets
       Received"; Dropped_Packets_Received[1] = "Tappade paket
       mottagna"; Bytes_Sent= new Array(); Bytes_Sent[0] = "Bytes Sent"; Bytes_Sent[1] = "Byte skickade"; lan1= new Array(); lan1[0] = "lan1"; lan1[1] = "lan1"; lan2= new Array(); lan2[0] = "lan2"; lan2[1] = "lan2"; lan3= new Array(); lan3[0] = "lan3"; lan3[1] = "lan3"; lan4= new Array(); lan4[0] = "lan4"; lan4[1] = "lan4"; Internet= new Array(); Internet[0] = "Internet"; Internet[1] = "Internet"; Private_DMZ_Gateway_IP= new Array(); Private_DMZ_Gateway_IP[0] = "Private DMZ Gateway IP"; Private_DMZ_Gateway_IP[1] = "Privat gateway-IP för DMZ"; Alert_Msg_154= new Array(); Alert_Msg_154[0] = "The first of the private DMZ Gateway IP should be the same with the first of the private DMZ Host IP"; Alert_Msg_154[1] = "Den första privata DMZ gateway-IP ska vara samma som den första privata DMZ värd-IP"; Alert_Msg_155= new Array(); Alert_Msg_155[0] = "The second of the private DMZ Gateway IP should be the same with the second of the private DMZ Host IP"; Alert_Msg_155[1] = "Den andra privata DMZ gateway-IP ska vara samma som den andra privata DMZ värd-IP"; Alert_Msg_156= new Array(); Alert_Msg_156[0] = "The third of the private DMZ Gateway IP should be the same with the third of the private DMZ Host IP"; Alert_Msg_156[1] = "Den tredje privata DMZ gateway-IP ska vara samma som den tredje privata DMZ värd-IP"; Group1= new Array(); Group1[0] = "Group1"; Group1[1] = "Grupp1"; Group2= new Array(); Group2[0] = "Group2"; Group2[1] = "Grupp2"; Group3= new Array(); Group3[0] = "Group3"; Group3[1] = "Grupp3"; Group4= new Array(); Group4[0] = "Group4"; Group4[1] = "Grupp4"; Group5= new Array(); Group5[0] = "Group5"; Group5[1] = "Grupp5"; Group6= new Array(); Group6[0] = "Group6"; Group6[1] = "Grupp6"; Group7= new Array(); Group7[0] = "Group7"; Group7[1] = "Grupp7"; Port1= new Array(); Port1[0] = "Port1"; Port1[1] = "Port1"; Port2= new Array(); Port2[0] = "Port2"; Port2[1] = "Port2"; Port3= new Array(); Port3[0] = "Port3"; Port3[1] = "Port3"; Port4= new Array(); Port4[0] = "Port4"; Port4[1] = "Port4"; Phase_1= new Array(); Phase_1[0] = "Phase 1"; Phase_1[1] = "Fas 1"; Phase_2= new Array(); Phase_2[0] = "Phase 2"; Phase_2[1] = "Fas 2"; Other_Options= new Array(); Other_Options[0] = "Other Options"; Other_Options[1] = "Övriga alternativ"; IP_Addr= new Array(); IP_Addr[0] = "IP Addr."; IP_Addr[1] = "IP-adr."; Host= new Array(); Host[0] = "Host"; Host[1] = "Värd"; Subnet= new Array(); Subnet[0] = "Subnet"; Subnet[1] = "Undernät"; Operation_Mode= new Array(); Operation_Mode[0] = "Operation Mode"; Operation_Mode[1] = "Arbetsläge"; Main= new Array(); Main[0] = "Main"; Main[1] = "Huvud"; Aggressive= new Array(); Aggressive[0] = "Aggressive"; Aggressive[1] = "Aggressivt"; bit= new Array(); bit[0] = "bit"; bit[1] = "bit"; Key_Life_Time= new Array(); Key_Life_Time[0] = "Key Life Time"; Key_Life_Time[1] = "Livstid för nyckel"; VPN_Note= new Array(); VPN_Note[0] = "Note: Following three additional proposals are also proposed in Main mode:DES/MD5/768,
      3DES/SHA/1024 and 3DES/MD5/1024."; VPN_Note[1] = "Observera: Följande tre ytterligare utkast föreslås också i huvudläget:DES/MD5/768,
      3DES/SHA/1024 och 3DES/MD5/1024."; VPN_Option1= new Array(); VPN_Option1[0] = "Compress (Support IP Payload Compression Protocol)"; VPN_Option1[1] = "Komprimera (Stöd för IP Payload Compression Protocol)"; VPN_Option2= new Array(); VPN_Option2[0] = "AH Hash Algorithm"; VPN_Option2[1] = "AH Hash-algoritm"; VPN_Option3= new Array(); VPN_Option3[0] = "NetBIOS broadcast"; VPN_Option3[1] = "NetBIOS-broadcast"; VPN_Option4= new Array(); VPN_Option4[0] = "Anti-replay"; VPN_Option4[1] = "Anti-replay"; VPN_Option5= new Array(); VPN_Option5[0] = "Keep Alive"; VPN_Option5[1] = "Behåll aktiv"; VPN_Option6_1= new Array(); VPN_Option6_1[0] = "If IKE failed more than"; VPN_Option6_1[1] = "Om IKE misslyckades mer än"; VPN_Option6_2= new Array(); VPN_Option6_2[0] = "times,
      block this unauthorized IP for "; VPN_Option6_2[1] = "gånger,blockera denna
          obehöriga IP under "; VPN_Option6_3= new Array(); VPN_Option6_3[0] = "seconds"; VPN_Option6_3[1] = "sekunder"; Please_enter_email= new Array(); Please_enter_email[0] = "Please enter email!"; Please_enter_email[1] = "Skriv in e-post!"; Please_enter_key= new Array(); Please_enter_key[0] = "Please enter key!"; Please_enter_key[1] = "Skriv in nyckel!"; Please_enter_domain_name= new Array(); Please_enter_domain_name[0] = "Please enter domain name!"; Please_enter_domain_name[1] = "Skriv in domännamn!"; Please_enter_shared_secret= new Array(); Please_enter_shared_secret[0] = "Please enter shared secret!"; Please_enter_shared_secret[1] = "Skriv in delad hemlighet!"; Please_enter_WPA_shared_Key= new Array(); Please_enter_WPA_shared_Key[0] = "Please enter WPA shared key!"; Please_enter_WPA_shared_Key[1] = "Skriv in delad WPA-nyckel!"; NTPServer1= new Array(); NTPServer1[0] = "NTPServer1"; NTPServer1[1] = "NTPServer1"; NTPServer2= new Array(); NTPServer2[0] = "NTPServer2"; NTPServer2[1] = "NTPServer2"; NTPServer3= new Array(); NTPServer3[0] = "NTPServer3"; NTPServer3[1] = "NTPServer3";