SETUP
This screen contains all of the AP's basic setup functions. Most users will be able to use the AP's default settings without making any changes. If you require help during configuration, please see the user guide.
Firmware Version:
v1.07, April 16, 2003
AP Name:
LAN IP Address:
(MAC Address: 00-06-25-24-ec-a1)
Obtain an IP Address Automatically
Specify an IP Address
.
.
.
Subnet Mask:
.
.
.
Gateway:
.
.
.
Wireless:
(MAC Address: 00-06-25-24-ec-a1)
SSID:
Channel:
1
2
3
4
5
6
7
8
9
10
11
(Domain: USA)
WEP:
Mandatory
Disable
AP Mode:
Access Point
Access Point Client
Remote AP MAC Address
Wireless Bridge
Remote Bridge MAC Address
Wireless Bridge - Point to MultiPoint
Wireless Repeater
Remote AP MAC Address
When set to "Access Point Client", "Wireless Bridge", "Wireless Bridge - Point to MultiPoint" or "Wireless Repeater" mode, the device will only communicate with another WAP 11 ver. 2.6, WAP 11 ver. 2.2 or WAP 11.
Backup/Restore Setting :
Click "Backup" to store Access Point configuration on your local PC.
Click "Restore" to restore Access Point configuration from your local PC.
