//Basic Setup var hsetup = new Object(); hsetup.phase1="The Setup \ screen is the first screen you will see when accessing the Router. Most users \ will be able to configure the Router and get it working properly using only the \ settings on this screen. Some Internet Service Providers (ISPs) will require \ that you enter specific information, such as User Name, Password, IP Address, \ Default Gateway Address, or DNS IP Address. This information can be obtained \ from your ISP, if required."; hsetup.phase2="Note: After \ you have configured these settings, you should set a new password for the Router \ using the Security screen. This will increase security, protecting the \ Router from unauthorized changes. All users who try to access the Router \ web-based utility or Setup Wizard will be prompted for the Router's password."; hsetup.phase3="Select the \ time zone for your location. If your location experiences daylight savings, \ leave the checkmark in the box next to Automatically adjust clock for \ daylight saving changes."; hsetup.phase4="MTU is the \ Maximum Transmission Unit. It specifies the largest packet size permitted \ for Internet transmission. Keep the default setting, Auto, to have \ the Router select the best MTU for your Internet connection. To specify a \ MTU size, select Manual, and enter the value desired (default is \ 1400).  You should leave this value in the 1200 to 1500 range."; hsetup.phase5="This entry is necessary for some ISPs and can be provided by them."; hsetup.phase6="The Router supports four connection types:"; hsetup.phase7="Automatic Configuration DHCP"; hsetup.phase8="(Point-to-Point Protocol over Ethernet)"; hsetup.phase9="(Point-to-Point Tunneling Protocol)"; hsetup.phase10="These types can be selected from the drop-down menu next to Internet Connection. \ The information required and available features will differ depending on \ what kind of connection type you select. Some descriptions of this \ information are included here:"; hsetup.phase11="Internet IP Address and Subnet Mask"; hsetup.phase12="This is the Router's IP Address \ and Subnet Mask as seen by external users on the Internet (including your \ ISP). If your Internet connection requires a static IP address, then your \ ISP will provide you with a Static IP Address and Subnet Mask."; hsetup.phase13="Your ISP will provide you with the Gateway IP Address." hsetup.phase14="(Domain Name Server)"; hsetup.phase15="Your ISP will provide you with at least one DNS IP Address."; hsetup.phase16="User name and Password"; hsetup.phase17="Enter the User Name and \ Password you use when logging onto your ISP through a PPPoE or PPTP \ connection."; hsetup.phase18="Connect on Demand"; hsetup.phase19="you can configure the Router to \ disconnect your Internet connection after a specified period of inactivity \ (Max Idle Time). If your Internet connection has been terminated due to \ inactivity, Connect on Demand enables the Router to automatically \ re-establish your connection as soon as you attempt to access the Internet \ again. If you wish to activate Connect on Demand, click the radio button. If \ you want your Internet connection to remain active at all times, enter 0 \ in the Max Idle Time field. Otherwise, enter the number of minutes \ you want to have elapsed before your Internet connection terminates."; hsetup.phase20="Keep Alive Option "; hsetup.phase21="This option keeps you connected \ to the Internet indefinitely, even when your connection sits idle. To use \ this option, click the radio button next to Keep Alive. The default \ Redial Period is 30 seconds (in other words, the Router will check the \ Internet connection every 30 seconds)."; hsetup.phase22="Note: Some \ cable providers require a specific MAC address for connection to the \ Internet. To learn more about this, click the System tab. Then click \ the Help button, and read about the MAC Cloning feature."; hsetup.phase23="LAN"; hsetup.phase24="IP Address and Subnet Mask"; hsetup.phase25="This is\ the Router IP Address and Subnet Mask as seen on the internal LAN. The \ default value is 192.168.1.1 for IP Address and 255.255.255.0 for Subnet \ Mask."; hsetup.phase26="DHCP"; hsetup.phase27="Keep the \ default, Enable, to enable the Router' DHCP server option. If you \ already have a DHCP server on your network or you do not want a DHCP server, \ then select Disable."; hsetup.phase28="Enter a \ numerical value for the DHCP server to start with when issuing IP addresses. \ Do not start with 192.168.1.1 (the IP address of the Router)."; hsetup.phase29="Maximum Number of DHCP Users"; hsetup.phase30="Enter the \ maximum number of PCs that you want the DHCP server to assign IP addresses \ to. The absolute maximum is 253--possible if 192.168.1.2 is your starting IP \ address."; hsetup.phase31="The Client \ Lease Time is the amount of time a network user will be allowed connection \ to the Router with their current dynamic IP address. Enter the amount of \ time, in minutes, that the user will be \"leased\" this dynamic IP address."; hsetup.phase32="Static DNS 1-3 "; hsetup.phase33="The Domain \ Name System (DNS) is how the Internet translates domain or website names \ into Internet addresses or URLs. Your ISP will provide you with at least one \ DNS Server IP Address. If you wish to utilize another, enter that IP Address \ in one of these fields. You can enter up to three DNS Server IP Addresses \ here. The Router will utilize these for quicker access to functioning DNS \ servers."; hsetup.phase34="The Windows Internet Naming Service (WINS) manages each PC's interaction with \ the Internet. If you use a WINS server, enter that server's IP Address here. \ Otherwise, leave this blank."; hsetup.phase35="Check all the \ values and click Save Settings to save your settings. Click Cancel \ Changes to \ cancel your unsaved changes. You can test the settings by connecting to the \ Internet. "; //DDNS var helpddns = new Object(); helpddns.phase1="The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed \ host and domain name to a dynamic Internet IP address. It is useful when you are \ hosting your own website, FTP server, or other server behind the Router. Before \ using this feature, you need to sign up for DDNS service at www.dyndns.org, \ a DDNS service provider."; helpddns.phase2="DDNS Service"; helpddns.phase3="To disable DDNS Service, keep the default setting, Disable. To enable DDNS \ Service, follow these instructions:"; helpddns.phase4="Sign up for DDNS service at www.dyndns.org, and write down \ your User Name, Password, and Host Name information."; helpddns.phase5="On the DDNS screen, select Enable."; helpddns.phase6="Complete the User Name, Password, and Host Name fields."; helpddns.phase7="Click the Save Settings button to save your changes. Click the Cancel Changes button to \ cancel unsaved changes."; helpddns.phase8="The Router current Internet IP Address is displayed here."; helpddns.phase9="The status of the DDNS service connection is displayed here."; //MAC Address Clone var helpmac = new Object(); helpmac.phase1="MAC Cloning"; helpmac.phase2="The Router¡¦s MAC address is a 12-digit code assigned to a unique piece of \ hardware for identification. Some ISPs require that you register the MAC \ address of your network card/adapter, which was connected to your cable or \ DSL modem during installation. If your ISP requires MAC address \ registration, find your adapter¡¦s MAC address by following the \ instructions for your PC¡¦s operating system."; helpmac.phase3="For Windows 98 and Millennium:"; helpmac.phase4="1. Click the Start button, and select Run."; helpmac.phase5="2. Type winipcfg in the field provided, and press the OK key."; helpmac.phase6="3. Select the Ethernet adapter you are using."; helpmac.phase7="4. Click More Info."; helpmac.phase8="5. Write down your adapter¡¦s MAC address."; helpmac.phase9="1. Click the Start button, and select Run."; helpmac.phase10="2. Type cmd in the field provided, and press the OK key."; helpmac.phase11="3. At the command prompt, run ipconfig /all, and look at your adapter¡¦s physical address."; helpmac.phase12="4. Write down your adapter¡¦s MAC address."; helpmac.phase13="To clone your network adapter¡¦s MAC address onto the Router and avoid calling your \ ISP to change the registered MAC address, follow these instructions:"; helpmac.phase14="For Windows 2000 and XP:"; helpmac.phase15="1. Select Enable."; helpmac.phase16="2. Enter your adapter¡¦s MAC address in the MAC Address field."; helpmac.phase17="3. Click the Save Settings button."; helpmac.phase18="To disable MAC address cloning, keep the default setting, Disable."; //Advance Routing var hrouting = new Object(); hrouting.phase1="Routing"; hrouting.phase2="On the Routing screen, you can set the routing mode and settings of the Router. \ Gateway mode is recommended for most users."; hrouting.phase3="Choose the correct working mode. Keep the default setting, \ Gateway, if the Router is hosting your network’s connection to the Internet (Gateway mode is recommended for most users). Select \ Router if the Router exists on a network with other routers."; hrouting.phase4="Dynamic Routing (RIP)"; hrouting.phase5="Note: This feature is not available in Gateway mode."; hrouting.phase6="Dynamic Routing enables the Router to automatically adjust to physical changes in \ the network layout and exchange routing tables with other routers. The \ Router determines the network packets route based on the fewest number of \ hops between the source and destination. "; hrouting.phase7="To enable the Dynamic Routing feature for the WAN side, select WAN. \ To enable this feature for the LAN and wireless side, select LAN & Wireless. \ To enable the feature for both the WAN and LAN, select \ Both. To disable the Dynamic Routing feature for all data transmissions, keep the \ default setting, Disable. "; hrouting.phase8="Static Routing,  Destination IP Address, Subnet Mask, Gateway, and Interface"; hrouting.phase9="To set up a static route between the Router and another network, \ select a number from the Static Routing drop-down list. (A static \ route is a pre-determined pathway that network information must travel to \ reach a specific host or network.)"; hrouting.phase10="Enter the following data:"; hrouting.phase11="Destination IP Address - \ The Destination IP Address is the address of the network or host to which you want to assign a static route."; hrouting.phase12="Subnet Mask - \ The Subnet Mask determines which portion of an IP address is the network portion, and which \ portion is the host portion. "; hrouting.phase13="Gateway - \ This is the IP address of the gateway device that allows for contact between the Router and the network or host."; hrouting.phase14="Depending on where the Destination IP Address is located, select \ LAN & Wireless or WAN from the Interface drop-down menu."; hrouting.phase15="To save your changes, click the Apply button. To cancel your unsaved changes, click the \ Cancel button."; hrouting.phase16="For additional static routes, repeat steps 1-4."; hrouting.phase17="Delete This Entry"; hrouting.phase18="To delete a static route entry:"; hrouting.phase19="From the Static Routing drop-down list, select the entry number of the static route."; hrouting.phase20="Click the Delete This Entry button."; hrouting.phase21="To save a deletion, click the Apply button. To cancel a deletion, click the \ Cancel button. "; hrouting.phase22="Show Routing Table"; hrouting.phase23="Click the \ Show Routing Table button to view all of the valid route entries in use. The Destination IP address, Subnet Mask, \ Gateway, and Interface will be displayed for each entry. Click the Refresh button to refresh the data displayed. Click the \ Closebutton to return to the Routing screen."; hrouting.phase24="Destination IP Address - \ The Destination IP Address is the address of the network or host to which the static route is assigned. "; hrouting.phase25="Subnet Mask - \ The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion."; hrouting.phase26="Gateway - This is the IP address of the gateway device that allows for contact between the Router and the network or host."; hrouting.phase27="Interface - This interface tells you whether the Destination IP Address is on the \ LAN & Wireless (internal wired and wireless networks), the WAN (Internet), or \ Loopback (a dummy network in which one PC acts like a network ecessary for certain software programs). "; //Firewall var hfirewall = new Object(); hfirewall.phase1="Block WAN Request"; hfirewall.phase2="By enabling the Block WAN Request feature, you can prevent your network from \ being \"pinged,\" or detected, by other Internet users. The Block WAN Request \ feature also reinforces your network security by hiding your network ports. \ Both functions of the Block WAN Request feature make it more difficult for \ outside users to work their way into your network. This feature is enabled \ by default. Select Disable to disable this feature."; hfirewall.right="Activer ou désactiver le pare-feu SPI."; //VPN var helpvpn = new Object(); helpvpn.phase1="VPN Pass-Through"; helpvpn.phase2="Virtual Private Networking (VPN) is typically used for work-related networking. For \ VPN tunnels, the Router supports IPSec Pass-Through and PPTP Pass-Through."; helpvpn.phase3="IPSec - Internet Protocol Security (IPSec) is a suite of protocols used to implement \ secure exchange of packets at the IP layer. To allow IPSec tunnels to pass \ through the Router, IPSec Pass-Through is enabled by default. To disable \ IPSec Pass-Through, uncheck the box next to IPSec."; helpvpn.phase4="PPTP - Point-to-Point Tunneling Protocol is the method used to enable VPN \ sessions to a Windows NT 4.0 or 2000 server. To allow PPTP tunnels to pass \ through the Router, PPTP Pass-Through is enabled by default. To disable \ PPTP Pass-Through, uncheck the box next to PPTP."; helpvpn.right="You may choose to enable PPTP, L2TP of IPSec passthrough to allow your network \ devices to communicate via VPN."; //Internet Access var hfilter = new Object(); hfilter.phase1="Filters"; hfilter.phase2="The Filters screen allows you to block or allow specific kinds of Internet \ usage. You can set up Internet access policies for specific PCs and set up \ filters by using network port numbers."; hfilter.phase3="This feature allows you to customize up to ten different Internet Access Policies \ for particular PCs, which are identified by their IP or MAC addresses. For \ each policy designated PCs, during the days and time periods specified."; hfilter.phase4="To create or edit a policy, follow these instructions:"; hfilter.phase5="Select the policy number \(1-10\) in the drop-down menu."; hfilter.phase6="Enter a name in the Enter Profile Name field."; hfilter.phase7="Click the Edit List of PCs button."; hfilter.phase8="Click the Apply button to save your changes. Click the Cancel button to \ cancel your unsaved changes. Click the Close button to return to the \ Filters screen."; hfilter.phase9="If you want to block the listed PCs from Internet access during the designated days and \ time, then keep the default setting, Disable Internet Access for Listed \ PCs. If you want the listed PCs to be able to access the Internet during \ the designated days and time, then click the radio button next to Enable \ Internet Access for Listed PCs."; hfilter.phase10="On the List of PCs screen, specify PCs by IP address or MAC address. Enter the \ appropriate IP addresses into the IP fields. If you have a range of \ IP addresses to filter, complete the appropriate IP Range fields. \ Enter the appropriate MAC addresses into the MAC fields."; hfilter.phase11="Set the time when access will be filtered. Select 24 Hours, or check the box next to From \ and use the drop-down boxes to designate a specific time period. "; hfilter.phase12="Set the days when access will be filtered. Select Everyday or the appropriate days of the week. "; hfilter.phase13="Click the Add to Policy button to save your changes and active it."; hfilter.phase14="To create or edit additional policies, repeat steps 1-9."; hfilter.phase15="To delete an Internet Access Policy, select the policy number, and click the Delete button."; hfilter.phase16="To see a summary of all the policies, click the Summary button. The \ Internet Policy Summary screen will show each policy number, Policy \ Name, Days, and Time of Day. To delete a policy, click its box, and then \ click the Delete button. Click the Close button to return to \ the Filters screen."; hfilter.phase17="Filtered Internet Port Range"; hfilter.phase18="To filter PCs by network port number, select Both, TCP, or UDP, \ depending on which protocols you want to filter. Then enter the port \ numbers you want to filter into the port number fields. PCs connected to the \ Router will no longer be able to access any port number listed here. To \ disable a filter, select Disable."; //share of help string var hshare = new Object(); hshare.phase1="Check all the values and click Save Settings to save your settings. Click the Cancel \ Changes button to cancel your unsaved changes."; //DMZ var helpdmz = new Object(); helpdmz.phase1="The DMZ hosting feature allows one local user to be exposed to the Internet for use \ of a special-purpose service such as Internet gaming or videoconferencing. \ DMZ hosting forwards all the ports at the same time to one PC. The Port \ Forwarding feature is more secure because it only opens the ports you want \ to have opened, while DMZ hosting opens all the ports of one computer, \ exposing the computer so the Internet can see it. "; helpdmz.phase2="Any PC whose port is being forwarded must have its DHCP client function disabled \ and should have a new static IP address assigned to it because its IP \ address may change when using the DHCP function."; /***To expose one PC, select enable.***/ helpdmz.phase3="To expose one PC, select "; helpdmz.phase4="Enter the computer's IP address in the DMZ Host IP Address field."; //help number string var hnum = new Object(); hnum.one="1." hnum.two="2." hnum.three="3." hnum.four="4." hnum.five="5." hnum.six="5." hnum.seven="6." hnum.eight="7." hnum.night="8."