The VPN Summary displays the Summary, Tunnel Status and GroupVPN Status.

Summary:
It shows the amount of Tunnel(s) Used and Tunnel(s) Available. RV082 supports 100 tunnels.
Detail: Click the Detail button to see the details of VPN Summary, and users can use the tools on the top to save, export or print the details of VPN Summary.

Tunnel Status:
Add New Tunnel:
Add Gateway to Gateway Tunnel or Add Client to Gateway Tunnel
Page: Previous page, Next page, Jump to page / 50 pages and entries per page
You can click Previous page and Next page button to jump to the tunnel that you want to see. You also can enter the page number into "Jump to page" directly and choose the item number that you want to see per page (3, 5, 10, 20, All).  
Tunnel No.: It shows the used Tunnel No. 1~100, and it includes the tunnels defined in GroupVPN.
Name: It shows the Tunnel Name that you enter in Gateway to Gateway page, Client to Gateway page or Group ID Name.
Status: It shows Connected, Hostname Resolution Failed, Resolving Hostname or Waiting for Connection.
If users select Manual in IPSec Setup page, the Status will show Manual and no Tunnel Test function for Manual Keying Mode.
Phase2 Encrypt/Auth/Group: It shows the Encryption (DES/3DES), Authentication (MD5/SHA1) and Group (1/2/5) that you chose in IPSec Setup field.If you chose Manual mode, there will be no Phase 2 DH Group, and it will show the Encryption and Authentication method that you set up in Manual mode. Local Group: It shows the IP and subnet of Local Group.
Remote Group: It shows the IP and subnet of Remote Group.
Remote Gateway: It shows the IP of Remote Gateway.
Tunnel Test: Click the Connect button to verify the tunnel status. The test result will be updated in Status. If the tunnel is connected, a Disconnect button will be available so you can disconnect the VPN connection.
Configure: Edit and Trash can.
If you click Edit button, it will link to the original setup page. You can change the settings. If you click Trash can_, all settings of this tunnel will be deleted, and this tunnel will be available.
Tunnel(s) Enable and Tunnel(s) Defined: It shows the amount of Tunnel(s) Enable and Tunnel(s) Defined. The amount of Tunnel Enable may be fewer than the amount of Tunnel Defined once the Defined Tunnels are disabled.

GroupVPN Status:
If you did not enable GroupVPN, it will be blank in GroupVPN Status.
Group ID Name: It shows the name you enter in Add new client to gateway tunnel page.
Connected Tunnels: It shows the amount of connected tunnels.
Phase2 Encrypt/Auth/Group: It shows the Encryption (DES/3DES), Authentication (MD5/SHA1) and Group (1/2/5) that you chose in IPSec Setup field.
Local Group: It shows the IP address and Subnet of Local Group you set up.
Remote Client: It shows the amount of Remote Client of this GroupVPN.
Remote Clients Status: If you click the Detail List button, it shows the details of IP address and Connection Time of this Group VPN.
Tunnel Test: Click the Connect button to verify the tunnel status. The test result will be updated in Status. If the tunnel is connected, a Disconnect button will be available so you can disconnect the VPN connection.
Configure: Edit and Trash can.
If you click Edit button, it will link to the original setup page, and you can change the settings. If you click Trash can_, all settings of this tunnel will be deleted, and this tunnel will be available.

VPN Clients Status:
VPN Clients Status shows the current VPN clients that are Currently setup on the RV082.
No.: It shows the number of the VPN Client.
Username: It shows each individual VPN Client Username.
Status: It shows the current VPN Clients connection status.
Start Time: It shows the exact time the VPN Client logged into the RV082 and established a VPN connection.
End Time: It shows the exact time the VPN Client logged off of the RV082 ending the established VPN connection.  
Duration: It shows the exact amount of time the VPN connection was established.
Disconnect: To disconnect any VPN client from the RV082, click the checkbox on the connection you wish to disconnect and click the Disconnect button.