Administrators can use this page to configure VPN Usernames and Passwords. These settings will work with the Linksys Quick VPN client only.
RV082 supports up to 15 QuickVPN Clients. 

VPN Client Users
You can configure a new users Username, Password, Password Change control, and Status from this section.
Username: Enter the new Username here.
New Password: Enter the new password here.
Confirm New Password: Re-enter the new password here.
Change Password Allowed: You can give the user the ability to change his/her password by clicking either Yes or No.   
Active: Click the checkbox to make the new User active.     
Add to List: Click this button to add the new User(s) to the Active VPN Client list.
Delete selected users: Select the user, and click the Delete selected users button can delete the selected user.

Click the Save Settings button to save the settings, click the Cancel Changes button to undo your changes, click the Show Tables to see the details.  When you click Save Settings button for FIRST configuration of VPN Client, the confirm message will be pop-out to inquire you about changing LAN IP Address if the current LAN IP address is still the default 192.168.1.x. You can choose Yes to change LAN IP Address to avoid IP conflict if VPN Client is also using 192.168.1.x. The new LAN IP Address will be shown in the confirm message. Otherwise, you can choose No, so the LAN IP Address will not be changed automatically. But when IP conflict, the VPN Client will not be allowed to connect to RV082.