Firmware Version: 1.2.3   

Setup

10/100 4-port VPN Router    

RV042

System
Summary

Setup

DHCP

System
Management

Firewall

VPN

Log

Wizard

Support

Logout

Network

Password

Time

DMZ Host

Forwarding

UPnP

One-to-One NAT

  More... >>  
Network
       
   

The Setup screen contains all of the router's basic setup functions. The device can be used in most network settings without changing any of the default values. Some users may need to enter additional information in order to connect to the Internet through an ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier.

Host Name & Domain Name:
Enter a host and domain name for the Router. Some ISPs (Internet Service Providers) may require these names as identification, and these settings can be obtained from your ISP. In most cases, leaving these fields blank will work.

LAN Setting:
This is the Router's LAN IP Address and Subnet Mask. The default value is 192.168.1.1 for IP address and 255.255.255.0 for the Subnet Mask.

More...
     
 
Host Name:
 (Required by some ISPs)
 
Domain Name:
 (Required by some ISPs)

LAN Setting
    
(MAC Address: 00-0c-41-91-f6-7e )
  
Device IP Address
Subnet Mask
  
. . .
 


Dual-WAN / DMZ Setting    
  Dual WAN DMZ  


WAN Connection Type
    

  

Use the Following DNS Server Addresses:

DNS Server (Required) 1:

. . .
2:
. . .


  

Use the Following DNS Server Addresses:

DNS Server (Required) 1:

. . .
2:
. . .



   
Save Settings   Cancel Changes